···
Log in / Register

Is the Hyundai Elantra fuel-consuming?

4 Answers
McLaila
08/31/25 7:12am

The actual measured average fuel consumption of the Hyundai Elantra is 7.6L/100km, which is moderate. Reasons for high fuel consumption: Excessive use of the car air conditioning. Reducing the fuel consumption caused by the car air conditioning can lower the actual fuel consumption of the vehicle. Setting the car air conditioning temperature to the lowest value will cause the air conditioning pump to run continuously and the blower to remain at high speed, which can actually increase fuel consumption. How to reduce fuel consumption: The correct method is to immediately lower the windows after entering a sun-exposed car. Do not turn on the air conditioning right away. Wait for one or two minutes until the temperature inside and outside the car balances, then close the windows and turn on the air conditioning. Be sure to set the air conditioning circulation to the indoor circulation mode.

Was this review help?
16
1
Share
McQuinn
09/13/25 3:32am

I've been driving a Hyundai Elantra for several years, and overall, I feel the fuel consumption isn't too high. In the city, a full tank can usually cover over 600 kilometers, which translates to about 7-8 liters per 100 kilometers. During peak traffic congestion, it can consume a bit more, often reaching over 9 liters. On the highway, it's much more fuel-efficient, easily staying under 6 liters. I chose this car mainly because, among similarly priced joint-venture cars, Hyundai offers good power and durability. Keeping the tire pressure normal and changing the engine oil regularly during maintenance helps maintain stable fuel consumption. A friend who bought a similar car also mentioned that the Elantra is worry-free and absolutely sufficient for daily commuting, without the need to frequently visit gas stations.

Was this review help?
4
5
Share
Expand All
PaigeRose
10/27/25 4:17am

When using the Elantra for daily commuting, I found that fuel consumption largely depends on your driving habits: in stop-and-go city traffic, it can indeed be higher, around 8-9 liters, while cruising on the highway drops it to about 6 liters. Since I often drive for business, I save a decent amount on fuel each week. I recommend considering your typical road conditions when choosing a car. If you're stuck in city traffic daily, pay a bit more attention to your pedal feel—gentle starts and braking can save a lot of fuel. Hyundai's overall optimization is good, with efficient engines. After a few years of driving, it still feels decent and not particularly fuel-thirsty, making it quite economical and friendly for young drivers.

Was this review help?
11
2
Share
Expand All
StIan
12/10/25 4:33am

The Hyundai Elantra's fuel consumption is moderate, neither too high nor particularly low. After driving it for half a year, my average city commute consumption is 8L/100km, and 6L/100km on highways. With proper maintenance, such as keeping the air filter clean and avoiding heavy loads, the fuel efficiency can be even better. Compared to some older Japanese models in the same class, it's slightly higher, but the price is much more affordable, making it ideal for daily errands.

Was this review help?
10
5
Share
Expand All
More Forum Discussions

What to Do When the Car Window Fails to Roll Up or Down?

Solutions for when the car window fails to roll up or down: First, turn on the ignition switch, pull and hold the switch upward until the window reaches the top, then continue holding for more than 3 seconds. Release the switch and immediately press and hold it downward until the window reaches the bottom, holding for more than 3 seconds. Repeat the upward movement once more to complete the initialization procedure, and the window function should be restored. The reasons for the window failing to roll up or down include: deformation or damage to the window's mud guard, loose screws on the window regulator, damage to the window regulator itself, or misalignment of the guide rail installation. It is recommended not to attempt repairs yourself and to visit a 4S store for inspection and repair as soon as possible.
18
1
Share

Which engine is used in the Chery Tiggo 8?

Chery Tiggo 8 uses two engines in total, one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The maximum torque of the 1.5-liter turbocharged engine is 230 Nm, and the maximum power speed is 5500 rpm; the maximum torque of the 1.6-liter turbocharged engine is 290 Nm, and the maximum power speed is 5500 rpm. Chery Tiggo 8 is a mid-size SUV under Chery, with a MacPherson independent suspension for the front suspension and a multi-link independent suspension for the rear suspension. In terms of body dimensions, its length, width, and height are 4700mm, 1860mm, and 1746mm respectively, with a wheelbase of 2710mm.
5
5
Share

What is the parts-to-whole ratio of the Mercedes-Benz C-Class?

The latest domestic automobile parts-to-whole ratio ranking released by the China Insurance Industry Association shows that among the top ten models with the highest parts-to-whole ratios, the Mercedes-Benz C-Class ranks first with a ratio of 835.29%. In the top ten, Mercedes-Benz models occupy three positions, while BMW also holds three spots. The remaining positions are taken by two Volvo models, one Dongfeng Infiniti model, and one Lexus model. However, it is worth noting that among these top ten models with the highest parts-to-whole ratios, except for the Lexus model, all others are domestically produced models, meaning most of their parts are also domestically sourced. So why are their parts-to-whole ratios still much higher than that of the imported Lexus? The profit margin here is imaginably substantial.
14
2
Share

Where is the fuel filler button on the BMW X7?

The fuel filler button on the BMW X7 is located below the left side of the driver's seat, marked with a fuel pump symbol. Pressing it will open the fuel tank cap. Inside the fuel tank cap, there is a twist-off cap that can be unscrewed counterclockwise for refueling. After refueling, screw the cap back clockwise until it clicks, indicating it's properly secured, then simply close the fuel tank cap. The BMW X7 is a large SUV under the BMW brand, featuring a double-wishbone independent front suspension and a multi-link independent rear suspension. In terms of dimensions, it measures 5163mm in length, 2000mm in width, and 1835mm in height, with a wheelbase of 3105mm. It is powered by a 3.0T turbocharged engine paired with an 8-speed automatic transmission.
11
0
Share

What are the types of independent suspension in cars?

There are 7 types of independent suspension in cars: trailing arm suspension, multi-link suspension, transverse arm suspension, longitudinal arm suspension, candle suspension, MacPherson suspension, and active suspension. The suspension system refers to the entire support system composed of springs and shock absorbers between the body and the tires, with the function of supporting the body and improving the riding experience. Different suspension settings will give drivers different driving sensations. The suspension system of a car is divided into two types: non-independent suspension and independent suspension. In non-independent suspension, the wheels are mounted at both ends of a solid axle, so when one wheel jumps, the other side wheel also jumps accordingly, causing the entire body to vibrate or tilt. In independent suspension, the axle is divided into two sections, and each wheel is independently installed under the frame by a coil spring. When one wheel jumps, the other wheel is not affected, and both wheels can move independently, improving the stability and comfort of the car.
8
5
Share

Is Freight on the Driving License Considered Operational?

Freight on the driving license is considered operational, meaning the driver has obtained approval and registration from the industrial and commercial administrative authorities, as well as consent from the transportation management department, and has acquired a road transport license, allowing them to engage in passenger or freight transport within the approved scope. The relevant conditions for applying for freight transport operations are as follows: 1. Condition 1: For freight transport operations excluding hazardous goods, applications should be submitted to the county-level road transport management authority. 2. Condition 2: For hazardous goods transport operations, applications should be submitted to the municipal road transport management authority. 3. Condition 3: The road transport management authority receiving the application as per the above conditions should complete the review within 20 days from the date of acceptance and make a decision to grant or deny the license. 4. Condition 4: If approved, the authority will issue a road transport operation license to the applicant and assign a vehicle operation certificate for the transport vehicles. If denied, the authority must notify the applicant in writing and provide reasons.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.