Is the HS7's engine supercharged?

1 Answers
CaydenLee
09/04/25 5:44am
The HS7's engine comes with both supercharging and turbocharging options. The HS7 is equipped with a 2.0T L4 turbocharged engine and a 3.0T V6 supercharged engine, with maximum power outputs of 185kW and 248kW, maximum torque of 380Nm and 445Nm, and maximum horsepower of 252PS and 337PS respectively. The HS7 is the first C-segment luxury SUV under the Hongqi brand, featuring a clean and bold full-length waistline on the side profile, dynamic two-tone wheels for enhanced handling, and the iconic side flag emblem that represents the Hongqi brand. The front and rear lights of the HS7 adopt a cloud-pattern design with neat styling, and all lighting units use LED light sources.
Was this review help?
1
0
Share
More Forum Discussions

What engine is used in the e92330i?

The e92-330i engine is produced at the Spartanburg plant in South Carolina, USA, and is an imported engine. The e92-330i engine model is the B48, with the low-power version delivering a maximum horsepower of 184, a maximum power of 135kW, and a maximum torque of 300Nm. The high-power version offers a maximum horsepower of 252, a maximum power of 185kW, and a maximum torque of 350Nm. For daily maintenance of the e92-330i engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
6
3
Share

What Causes the Car Engine Warning Light to Sometimes Illuminate and Sometimes Not?

Engine warning light flashing indicates that the engine has a fault, and the fault is relatively serious, requiring immediate parking for inspection. The specific reasons may include the following 7: Sensor malfunction: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to illuminate. Fuel quality issue: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and lead to the warning light turning on. Poor mixture combustion: Poor mixture combustion can lead to engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, fuel line blockage, etc., can all cause poor mixture combustion in the engine. Turbocharging issue: Intake turbocharging pipelines and turbochargers can also cause the engine warning light to illuminate. The most common is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal abnormal noise, blue or black smoke from the exhaust pipe. Intake issue: If the car's intake has problems, it may cause engine pipeline blockage, and in severe cases, the engine warning light will illuminate. If the air filter is not clean and not regularly cleaned, it can lead to intake problems. Exhaust issue: Exhaust faults can also cause the engine warning light to illuminate. Rear oxygen sensor, three-way catalytic converter, exhaust camshaft and bearing faults are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the three-way catalytic converter, or engine fuel supply system failures can easily cause three-way catalytic converter faults. Anti-theft system fault: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to not work properly, while the engine warning light illuminates. Generally, the engine warning light has four states: steady yellow light, flashing yellow light, steady red light, and flashing red light. The severity of the fault is higher when flashing than steady, and higher for red than yellow. If ranked, flashing red > flashing yellow > steady red > steady yellow. When the engine warning light is on, you can follow these steps to handle it: First, check if the engine is running normally, whether there is shaking, black smoke, etc. If so, try not to start the engine again. Especially note that if the red light is on, do not start the engine again. If the engine can start, turn it off for 5-10 minutes, then without pressing the brake, press the start button once, or without pressing the clutch, turn the car key halfway to the 'on' position. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the warning light on the dashboard goes off. If the warning light does not go off, please go to a service station as soon as possible to find out the reason. The service station can read the fault code with a portable diagnostic tool to obtain fault information and perform targeted repairs.
6
4
Share

Is the Sonata Engine Imported?

The Sonata engine is produced at Beijing Hyundai's second factory and is a domestically manufactured engine. The 2.0T version of the Sonata has an engine model G4NN, with a maximum horsepower of 240, maximum power of 176.5kW, and maximum torque of 353Nm. The 1.5T version has an engine model G4FS, with a maximum horsepower of 170, maximum power of 125kW, and maximum torque of 253Nm. For daily maintenance of the Sonata engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
14
1
Share

How to turn on the headlights of Audi A6?

The Audi A6 headlights have an automatic mode and can also be turned on manually. There is a switch on the left side of the cabin, and turning the switch will turn on the headlights. Below is more information about the Audi A6: 1. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon models. 2. The button for the Audi A6 headlight washer is the same as the windshield washer button. 3. The difference is that to activate the headlight washer, you must first turn on the headlight switch, then lightly pull the windshield washer lever upwards to spray water, so that both the windshield washer and headlight washer will work simultaneously.
3
5
Share

What Brand is Infiniti?

Infiniti is a luxury vehicle brand under Nissan Motor Company. Here is some information about Infiniti: 1. Infiniti was first launched in the United States, with models including the high-performance luxury sedan Infiniti Q45 and the fun-to-drive luxury coupe Infiniti M30. 2. It competes with Lexus, BMW, and Mercedes-Benz in the North American market and has quickly grown into an important luxury car brand in North America. 3. Since its inception, Infiniti has been renowned for its unique and avant-garde design, excellent driving performance, and top-tier customer service.
20
2
Share

How to adjust heating and cooling for Haval F7x air conditioning?

Here is the operation method for heating and cooling in Haval F7x: 1. Select AUTO mode, the corresponding indicator light will illuminate. At this time, the compressor will automatically turn on or off according to different temperatures and environments. 2. Set the temperature to the desired level, and the air conditioning system will automatically adjust the air outlet mode and air volume to reach the set temperature. Additional information: 1. The Haval F7x Extreme Intelligent Sports Edition is equipped with an intelligent timely four-wheel drive system, featuring six modes: standard/sport/mud/sand/snow/ECO economy, meeting different customers' driving needs. 2. In terms of power, the Haval F7x Performance Edition continues to be equipped with the existing 2.0T inline four-cylinder engine.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.