···
Log in / Register

Is the Honda URV the same as the Avancier?

4Answers
AliyahAnn
08/31/2025, 12:13:31 AM

The Honda URV is not the same as the Avancier. Both the URV and the Avancier are mid-size SUVs under the Honda brand. The body dimensions of the URV are: length 4856mm, width 1942mm, height 1670mm, with a wheelbase of 2820mm; while the Avancier's body dimensions are: length 4858mm, width 1942mm, height 1670mm, with the same wheelbase of 2820mm. Both the URV and the Avancier feature MacPherson strut independent front suspension and multi-link independent rear suspension. They are equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 193PS, maximum torque of 243Nm, and maximum power of 142kW, paired with a continuously variable transmission (CVT).

Was this review help?
103
Share
HenryDella
05/09/2026, 06:44:43 AM

As a car enthusiast who has studied Honda models for years, I can tell you the UR-V and Avancier are sibling models with distinct differences. The UR-V is slightly more compact with a lower center of gravity, offering agile handling, while the Avancier is larger and prioritizes comfort. The UR-V is manufactured by Dongfeng Honda, whereas the Avancier is a product of GAC Honda, with complementary market positioning. Design-wise, the UR-V features a sharp front fascia, contrasting with the Avancier's rounded aesthetics. Under the hood, the UR-V's 1.5T engine averages around 9L/100km fuel consumption, slightly more efficient than the Avancier's 2.0T, though the latter excels in ride comfort. Both are well-suited for Chinese road conditions, but the UR-V better caters to driving enthusiasts while the Avancier is the family-oriented choice. Confusion between them is understandable, but clarify your needs when choosing.

Was this review help?
7
Share
Expand All
RowanAnn
05/10/2026, 11:58:25 PM

I've studied Honda's development history in China, where the UR-V and Avancier are two distinct models. The UR-V originates from Honda's North American design, launched in China in 2017 targeting the youth market, while the Avancier was introduced earlier with a focus on luxury. They differ in production platforms: the UR-V is built on a sportier chassis, whereas the Avancier uses a larger-sized framework. Dimensionally, the UR-V measures approximately 4850mm in length, while the Avancier exceeds 4900mm, offering more spacious interiors. Historical naming similarities might cause confusion, but in reality, both models are sold concurrently. Understanding these backgrounds, I recommend comparing actual vehicle specifications when purchasing.

Was this review help?
3
Share
Expand All
ManuelMarie
05/11/2026, 04:21:22 AM

I often help friends choose cars, and the UR-V and the Crown Road are not the same. The UR-V is like an enthusiastic runner, offering a thrilling driving experience, while the Crown Road is like a leisurely traveler, providing a comfortable ride. As a consultant, I recommend: if you enjoy driving dynamics, the UR-V is better, equipped with a 1.5T engine for fuel efficiency and practicality; if comfort is your priority, the Crown Road offers a spacious rear seat and soft suspension. For daily use, the UR-V is more agile for city commuting, while the Crown Road is more relaxing for long trips. In terms of maintenance, Honda's extensive service network makes both convenient, but the UR-V has a slightly shorter maintenance interval. Before buying, take a test drive to truly feel the differences.

Was this review help?
16
Share
Expand All
More Q&A

Where is the B-pillar of a sedan located?

The position and function of the B-pillar in a car are as follows: 1. The position of the B-pillar in a car: The B-pillar is located between the front and rear seats of the cockpit, specifically the vertical bar between the two doors on either side, extending from the roof to the bottom of the car. From the inside, the seat belt is attached to the B-pillar. The B-pillar primarily supports the roof and the front and rear doors, as well as houses components such as seat belts and wiring. 2. The function of the B-pillar in a car: When the vehicle is subjected to a side impact, the B-pillar also plays a protective role for the occupants inside. Thanks to the application of high-tech materials like carbon fiber and high-strength alloys in car bodies, models such as the BMW i3 and Citroën C3 have now eliminated the B-pillar, ensuring safety while expanding cabin space and making it more convenient for passengers to enter and exit the vehicle.
110
Share

What should be noted when mortgaging a vehicle to a private individual?

When mortgaging a vehicle to an individual, the procedures must comply with the "Motor Vehicle Registration Regulations". The following legal procedures are required for mortgaging a fully paid vehicle to an individual: 1. Mortgage Registration: Go to the vehicle management office to complete the mortgage registration. Additionally, whether the vehicle is fully paid can also be verified at the vehicle management office, so the first step should ideally be a visit there. 2. Notarization: Visit the local notary office to complete relevant notarizations, including: loan notarization, mortgage and release authorization notarization, sales authorization notarization, and compulsory execution notarization. 3. Caution: A mortgage contract signed privately without registration at the vehicle management office is invalid. While the vehicle can still be sold, it is advisable to request a transfer of ownership. A timeframe (such as the debt maturity date) can be stipulated in the contract for completing the transfer procedures. However, prolonged failure to transfer ownership can complicate matters like vehicle insurance. Without compulsory insurance, driving the vehicle will lead to inspections and penalties, and future vehicle inspections may also become problematic.
104
Share

What does vehicle residual value mean?

Vehicle residual value refers to the remaining use value within the stipulated reasonable service life of a vehicle, which is known as the generalized vehicle residual value. Here is additional information: 1. Influencing factors: The service life of the vehicle—the longer the vehicle has been used, the lower the residual value rate tends to be; the condition of the vehicle—the better the condition, the higher the residual value rate; the nature of vehicle use—generally, the residual value rate of commercial vehicles is lower, while that of private cars is higher. Additionally, factors such as the color of the vehicle, whether all necessary documents are complete, the cost of routine maintenance and repairs, the inventory of similar vehicles in the market, and the price fluctuations of new vehicles of the same brand also play a role. 2. Evaluation methods: There are many methods for estimating vehicle residual value. According to national regulations, there are four methods: the income present value method, the replacement cost method, the current market price method, and the liquidation price method. Among these, the replacement cost method is the most fundamental and the simplest to implement.
104
Share

Is the approval process for Dandan Car Order easy to pass?

Applicants' credit qualifications will be reviewed. If the personal credit is very poor, the approval is likely to be rejected. Here are the specific details: 1. Advantages: Dandan Car Order also adopts a low down payment car purchase model. Another advantage of Dandan Car Order is that the purchased vehicle is registered under the user's private name, meaning it is directly registered under the user's name, eliminating the need for subsequent transfer procedures. This also gives users peace of mind, as they no longer have to worry about vehicle transfer issues. 2. Differences: Unlike other car purchase platforms, if the Dandan Car Order approval is not passed, the money will be refunded, and there is no need to wait until the end of the first year's lease period to complete the transfer procedures. 3. Material requirements: If you want to buy a car on the Dandan Car Order platform, the materials you need to prepare include ID card, driver's license, bank card, property certificate, bank statements, etc. The more comprehensive the materials, the faster the approval will be, and the higher the credit limit.
116
Share

What does the transmission restriction function of the Ford Mondeo mean?

Ford Mondeo's transmission restriction function is a protective mode of the transmission. When the transmission computer detects a transmission fault, it will protect the automatic transmission by locking it in a certain gear, ensuring that the driver can drive the vehicle to a repair shop for inspection. Additional information: 1. Automatic Transmission: An automatic transmission is a gear-shifting device that automatically changes gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. Currently, there are four common types of automatic transmissions for cars: hydraulic automatic transmission (AT), continuously variable transmission (CVT), automated manual transmission (AMT), and dual-clutch transmission. 2. Powertrain: The Ford Mondeo is still equipped with two turbocharged engines, a 1.5T and a 2.0T, with maximum power outputs of 134kW and 152kW, and peak torques of 243Nm and 354Nm, respectively. Both engines have seen slight improvements in maximum power and peak torque compared to the current models. The transmission system is matched with a 6-speed automatic manual transmission, and the official combined fuel consumption is as low as 7.3L per 100 kilometers.
108
Share

What is the function of timing gears?

The function of timing gears: They play a role in mechanical devices by providing temporal scale positioning to achieve related control functions. Compared with developed countries, the timing gear manufacturing industry still faces issues such as insufficient independent innovation capability, slow new product development, disorderly market competition, weak enterprise management, low informatization level, and the need to improve the overall quality of employees. Additional information is as follows: 1. Three transmission methods of timing gears: chain drive, toothed belt drive, and gear drive. The positive and negative gears of car engines generally use toothed belt drive, which has advantages such as simple structure, low noise, smooth operation, high transmission precision, and good synchronization. However, its strength is relatively low, and after long-term use, it is prone to aging, stretching deformation, or breakage, making it difficult to observe its working condition. 2. The timing and state of the valve's action must be consistent with the state and timing of the piston's movement. Since the crankshaft and camshaft are not on the same axis, there must be a transmission system to connect them. This transmission system is completed by two gears and a chain or belt, and these two gears are called timing gears.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.