Is the Honda CR-V produced by GAC Honda or Dongfeng Honda?

1 Answers
OAmelia
07/30/25 4:39am
CR-V is produced by Dongfeng Honda. Here are the specific details about the CR-V: 1. Exterior: It features a front grille with a family-style design. The side profile eliminates the "humpback" shape of the older model, presenting cleaner lines. The L-shaped taillights are highly distinctive, and the overall design is more youthful. 2. Features: It comes standard with a multifunction steering wheel, cruise control, anti-glare rearview mirror, foldable rear seats, rear air vents, Bluetooth phone connectivity, LED daytime running lights, front fog lights, and more. The CR-V measures 4585/1855/1679mm in length, width, and height, with a wheelbase of 2660mm. Compared to the previous generation, it is 30mm longer, 36mm taller, and has a 41mm longer wheelbase, making the rear seats more spacious than the previous model.
Was this review help?
17
5
Share
More Forum Discussions

How to Check if a New Car Has Been Repaired?

To check if a new car has been repaired, you can visit a 4S store. Here are the specific methods to check if a new car has been repaired: Check the maintenance and repair records: You can go to a 4S store to check the maintenance and repair records, or use some third-party software to query the car's maintenance and repair records. If it's a new car and no insurance has been purchased, it's impossible to check the claim records. If there are no repair records at the 4S store, you can hire a used car appraiser to inspect the car. During the repair process, some traces may be left, which a professional used car appraiser can identify. Carefully examine the car's appearance and odometer reading. A new car won't have small bumps or dents. Open the engine hood and wheel covers, and carefully check if any screw caps show signs of being tampered with. New cars are generally assembled electrically, so there shouldn't be any manual tightening marks. Check the odometer's mileage. New cars are usually transported by truck, and if they are driven a short distance, it generally won't exceed 500 kilometers. However, be cautious of odometer tampering—check if the screws on the dashboard have been disturbed.
19
2
Share

How to Deal with Three-Cylinder Engine Vibration?

The causes and solutions for three-cylinder engine vibration are as follows: 1. Dirty Air Filter: The air filter is designed to protect the engine and reduce wear. It should generally be replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine vibration. Solution: Replace the air filter. 2. Expired Spark Plugs: Spark plugs have a limited lifespan. After 30,000-40,000 kilometers, their ignition efficiency significantly decreases, which can affect ignition. Solution: Replace the spark plugs. 3. Abnormal Engine Coolant Temperature: Possible causes include insufficient coolant, a stuck thermostat, a non-functioning fan, or inaccurate temperature readings from the temperature control switch. The engine operates within a specific temperature range. If the temperature is too high, ignition timing may advance, the air-fuel mixture ratio may change, engine oil viscosity may thin, and lubrication performance may degrade. Solution: Inspect and replace relevant components. 4. Clogged Fuel Injectors: Fuel injectors in electronic fuel injection vehicles are critical components for fuel delivery, with a long lifespan potentially reaching hundreds of thousands of kilometers. However, deposits in gasoline can clog the injector nozzles, causing inconsistent fuel delivery among injectors. This leads to uneven cylinder operation and engine vibration. Solution: Remove and clean the injectors.
17
3
Share

Should Front and Rear Brake Pads Be Replaced Together or Separately?

Front and rear brake pads do not need to be replaced together, as they have different replacement cycles. Compared to front brake pads, rear brake pads have a longer service life. Under normal driving conditions, front brake pads typically need replacement after approximately 30,000 to 50,000 kilometers, while rear brake pads can last around 60,000 to 100,000 kilometers before requiring replacement. Below is relevant information about brake pads: 1. Replacement Timing: There is no fixed time for replacing brake pads; the aforementioned figures are only relative. The replacement cycle of brake pads is not only directly related to their service life but also depends on the vehicle's driving conditions and the driver's habits. New brake pads are about 1.5 centimeters thick and should be replaced promptly when worn down to one-third of their original thickness, or about 5 millimeters. When replacing brake pads, both pads on the same axle should be replaced together to ensure balanced braking performance on both sides. 2. Materials: Brake pads are currently made from materials such as asbestos, high-carbon fiber, semi-metallic, ceramic, etc. Among these, asbestos brake pads have been phased out. The most common materials today are semi-metallic and ceramic. Semi-metallic pads are more affordable and widely used in household vehicles. Comparatively, ceramic pads outperform metallic ones, offering better wear resistance, high-temperature resistance, thermal stability, faster heat dissipation, and higher friction coefficient. However, they are also more expensive and commonly used in mid-to-high-end vehicle models.
5
4
Share

How to Distinguish Between Class A, B, and C Cars?

Class A, B, and C cars are distinguished based on wheelbase and engine displacement. The specific methods are as follows: Differentiation based on wheelbase and displacement: A00-class cars have a wheelbase between 2 meters and 2.2 meters, with an engine displacement of less than 1 liter. For example, the Alto is classified as an A00-class car. A0-class cars have a wheelbase ranging from 2.2 meters to 2.3 meters and a displacement between 1 liter and 1.3 liters, with the two-door Xiali being a typical example. Generally, A-class cars have a wheelbase of approximately 2.3 meters to 2.45 meters and a displacement of about 1.3 liters to 1.6 liters. Models like the FAW-Volkswagen Jetta and Shanghai Volkswagen Polo are considered stars in the A-class category. B-class mid-range cars have a wheelbase of about 2.45 meters to 2.6 meters and a displacement ranging from 1.6 liters to 2.4 liters. In recent years, the B-class car market has gradually become the main battleground for domestic automakers, with models such as the Audi A4, Passat, Zhonghua, and Eastar belonging to the B-class segment. C-class luxury cars have a wheelbase of approximately 2.6 meters to 2.8 meters and an engine displacement of 2.3 liters to 3.0 liters. Among domestic models, the Audi A6 is undoubtedly the most renowned C-class car.
10
1
Share

How to Emergency Unlock a Car?

Visit the local 4S store to request a spare key, as they usually provide one when you purchase the car. Alternatively, you can seek assistance from a repair shop to fix the car door, as they can offer help.
13
5
Share

How to Activate Left and Right Turn Signals in a Car?

Car turn signal switches are generally located on the left side of the steering wheel. You need to push the lever upward to activate the indicator. After operation, the dashboard will display the right turn signal icon, and the right turn signals at both the front and rear of the vehicle will illuminate.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.