Is the Honda Civic's Transmission AT or CVT?

What does an exclamation mark in the middle of the engine warning light indicate?

An exclamation mark inside the engine symbol represents the engine warning light. There are primarily 7 reasons why it illuminates: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which triggers the engine warning light. Fuel/oil quality issues: Failure to use the fuel and oil specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all cause poor combustion. Turbocharging problems: The intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system is compromised, it may lead to clogged engine piping, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake issues. Exhaust problems: Exhaust system faults can also illuminate the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine control unit, the anti-theft system may prevent the engine from operating normally while also triggering the warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke emission. If present, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can be started, turn it off for 5-10 minutes. Then, without pressing the brake pedal, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will enter self-diagnosis mode upon power-on. Wait 5-10 seconds to see if the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes, identify the issue, and perform targeted repairs.

20

4

Share

How to adjust the time on a Volkswagen Sagitar?

To adjust the time on a Volkswagen Sagitar, follow these steps: 1. Press the clock button below the CD player for three seconds; 2. The dashboard will emit a beep sound; 3. When the time starts flashing, adjust it accordingly; 4. Once the time is set, press the clock button again to stop the flashing. Taking the 2021 Volkswagen Sagitar as an example, it belongs to the compact car category with the following dimensions: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, and a fuel tank capacity of 50 liters. The 2021 Volkswagen Sagitar features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 112 PS, maximum power of 85 kW, and maximum torque of 175 Nm, paired with a 5-speed manual transmission.

1

Share

Where is the license plate 'Chuan Y' from?

Chuan Y is the license plate of Bazhong City in Sichuan Province. The license plate codes for various regions in Sichuan Province are as follows: Chuan A is Chengdu City, Chuan B is Mianyang City, Chuan C is Zigong City, Chuan D is Panzhihua City, Chuan E is Luzhou City, Chuan F is Deyang City, Chuan H is Guangyuan City, Chuan J is Suining City, Chuan K is Neijiang City, Chuan L is Leshan City, Chuan M is Ziyang City, Chuan Q is Yibin City, Chuan R is Nanchong City, Chuan S is Dazhou City, Chuan T is Ya'an City, Chuan U is Aba Tibetan and Qiang Autonomous Prefecture, etc. A license plate is the abbreviation for a vehicle license plate and a vehicle driving license. It is a hard plate with a unified format and style as stipulated by national vehicle management regulations, issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates, bearing a registration code.

15

1

Share

How long does it take to get a license plate for a car?

It takes three to five working days to get a license plate for a car. After selecting the number, you need to pay the fee and wait to receive the plate. The process of getting a license plate is as follows: 1. Prepare the relevant documents. For individual registration, you need to bring your ID card and a copy; for corporate registration, you need to bring the original and a copy of the company's unified social credit code business license. 2. Purchase compulsory traffic insurance from any insurance company. 3. Bring the insurance policy, customs declaration, commodity inspection certificate, and invoice to the local industrial and commercial bureau for verification and stamping. 4. Go to the local state tax bureau to pay the vehicle purchase tax. 5. Bring all the documents to the vehicle management office for stamping, taking photos, and vehicle inspection.

9

3

Share

Why doesn't the dashboard display when the car's low beam is turned on?

The reason why the dashboard does not display when the car's low beam is turned on is: after turning on the low beam, the dashboard generally does not display it. The background lights on the dashboard usually dim when the low beam is turned on, and the brightness of the background lights on the dashboard increases when the low beam is turned off. The method to turn on the car's low beam is: 1. Locate the set of light combination switches on the left side of the steering wheel; 2. Rotate forward one notch to turn on the dashboard lights; 3. Rotate another notch to turn on the low beam. The functions of car lights include: 1. High beam: used for roads without lights or to signal overtaking; 2. Low beam: used for urban roads with lights; 3. Width indicator lights: used at night to display the width and length of the car body; 4. Fog lights: used to improve visibility in foggy conditions; 5. Turn signals: used for changing directions; 6. Brake lights: to inform following vehicles to slow down or stop; 7. Reverse lights: turn on when the car is in reverse gear; 8. License plate lights: illuminate the license plate at night.

8

4

Share

What is the name of the protective plate above the car tire?

The protective plate above the car tire is called a mudguard, which primarily serves to block mud and dust. It is usually installed behind the four tires of the car. The mudguards for the front two tires are located on the left and right lower sills, while the rear mudguards are positioned on the rear bumper. Installation method for mudguards: 1. Prepare mudguards corresponding to the car model, pliers, a screwdriver, matching screws, and nuts. 2. Remove the screws from the corresponding parts of the original car body when installing the mudguards. 3. Place the mudguards in the corresponding positions on the vehicle, ensuring that the outer edge of the mudguard is parallel to the outer edge of the tire. 4. Some car models require self-drilling holes; the screw hole positions must be drilled accurately to avoid affecting the installation effect. 5. Use the included special screws to tighten and secure them. Mudguards can effectively protect the car body, reduce mud and water splashes during rainy days, and minimize damage to the car paint caused by gravel being flung out due to the wheels rolling over them.

14

3

Share

Is the Honda Civic's Transmission AT or CVT?

What does an exclamation mark in the middle of the engine warning light indicate?

How to adjust the time on a Volkswagen Sagitar?

Where is the license plate 'Chuan Y' from?

How long does it take to get a license plate for a car?

Why doesn't the dashboard display when the car's low beam is turned on?

What is the name of the protective plate above the car tire?

What are the reasons for a clicking noise when reversing?

What is the difference between cars with T and L?

How to reset the tire pressure on the Volkswagen Tayron?

What are the causes of engine idle vibration?