Is the Highway Free for Several Days During the Mid-Autumn Festival?

1 Answers
PrestonDella
07/29/25 1:27pm
Highway tolls are charged during the Mid-Autumn Festival, and free passage is not implemented unless the Mid-Autumn Festival coincides with the National Day holiday within the same period; otherwise, there is no free passage benefit. Additional information: 1. Affected by macroeconomic conditions, although only small passenger vehicles with fewer than 7 seats are exempt from tolls during major holidays, due to the sluggish manufacturing economy, cargo transportation demand in some regions has significantly declined, leading to a year-on-year decrease in toll revenue during the free period. 2. During the 2021 New Year's Day and Dragon Boat Festival, highways did not offer free passage. Only four holidays—Spring Festival, Qingming Festival, Labor Day, and National Day (including Mid-Autumn Festival)—provide free highway access, totaling 22 free days.
Was this review help?
15
1
Share
More Forum Discussions

What is the tire model of the Hyundai Elantra?

The Hyundai Elantra 1.6L is equipped with Nexen Npriz AH8 series tires, with specifications 205/55/R16. These tires prioritize comfort and grip for daily driving. Here is some relevant information about tire pressure: 1. Both overinflation and underinflation can affect tire lifespan. In winter, tire pressure can be slightly higher than in summer. Recommended summer tire pressure is between 2.2-2.5 bar, while winter pressure should not exceed 2.8 bar. Adjust pressure appropriately based on load conditions. 2. Insufficient tire pressure may lead to excessive wear, poor vehicle control, reduced fuel efficiency, and potential wheel deformation. Therefore, maintain tire pressure within the specified range. 3. Excessive tire pressure can result in uncomfortable rides, accelerated wear in the center tread, and increased risk of tire damage on hazardous road surfaces.
18
5
Share

Do You Need to Press the AC Button to Turn on the Cold Air?

The AC button in a car activates the air conditioning compressor. To use the air conditioning for cooling, you need to press the AC button. When pressed, the air conditioning compressor starts working to blow cool air into the car. Below are some methods for maintaining your car's air conditioning system: 1. Comprehensive inspection of the air conditioning system. When using the air conditioning for the first time in summer, you should first inspect the system. For example, check the refrigerant level through the reservoir and see if the air filter is dirty or if there are any foreign objects in the radiator. 2. Pay attention to cleaning the air conditioning. The air filter should be replaced regularly because spring brings a lot of dust and willow catkins, which can stick to the filter and promote bacterial growth, leading to a musty smell in the air conditioning. Additionally, the condenser should be cleaned periodically, and the radiator should be removed for thorough cleaning. 3. Regularly turn on the high fan setting. The air conditioning system can accumulate a lot of dust during use. Turning on the high fan setting periodically helps blow out dust from the air ducts, which is a simple way to keep the air conditioning clean. Also, use specialized duct cleaning solutions.
14
4
Share

Where are the license plates starting with 'Yun' from?

Yun is the abbreviation for Yunnan, so license plates starting with 'Yun' are from Yunnan. The license plates of each province in China start with the abbreviation of the province. More information about Yunnan license plates is as follows: 1. Yun A: Kunming City, Yun C: Zhaotong, Yun D: Qujing, Yun E: Chuxiong, Yun F: Yuxi, Yun G: Honghe, Yun H: Wenshan, Yun J: Simao, Yun K: Xishuangbanna, Yun L: Dali, Yun M: Baoshan, Yun N: Dehong, Yun P: Lijiang, Yun Q: Nujiang, Yun R: Diqing, Yun S: Lincang. 2. Yun O-U are license plates of the Yunnan Provincial Public Security Department. This is because Yun O followed by five digits are license plates for provincial-level party and government institutions in Yunnan, and those with the first digit of the five-digit number being A-S are license plates for public security, procuratorial, and judicial departments in various cities and prefectures of Yunnan. The Provincial Public Security Department wanted a dedicated number segment, so they used the 'U' prefix.
6
4
Share

When will the Lynk & Co 05 be released?

Lynk & Co 05 was released on May 5, 2020. Here is some relevant information about the Lynk & Co 05: 1. Interior: The new car adopts a brand-new design language, differing from the multi-arc rounded-corner interior design of existing products. The Lynk & Co 05 extensively employs straight lines and diamond-shaped lines, creating a good sense of layering. However, at first glance, there is a noticeable sense of patchwork, especially as the large central touchscreen appears somewhat too "isolated." In terms of materials, the new car uses a lot of suede and red stitching. 2. Powertrain: The new car will be equipped with a 1.5T turbocharged engine (model JLH-3G15TD) and a 2.0T turbocharged engine (model JLH-4G20TD), with maximum power outputs of 180 horsepower and 190 horsepower, respectively. Additionally, the car is expected to feature a high-power 2.0TD engine from Volvo's Drive-E series in the future, with a maximum power of 254 horsepower and a peak torque of 350 N·m. In terms of transmission, it will be paired with an Aisin 8-speed automatic transmission, and a four-wheel-drive version will also be available.
7
4
Share

Where is the AUX in the 2010 old Mercedes?

There are two locations for the AUX in the 2010 old Mercedes. One is above the passenger footwell, visible on the left side, or inside the front glove box. The AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to it, audio from electronic devices can be transmitted through the headphone jack and AUX interface to the car's audio system, allowing playback through the car's audio broadcast facilities. The USB interface can be used to insert a USB drive for audio playback. To use it, connect one end to the AUX interface and the other end to a mobile phone, MP3, MP4, or other video player. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is typically a 3.5mm standard headphone jack). Aux is short for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When special applications are needed, such as additional audio output or input, these terminals can be used. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting with a modem via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are used in different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically not possible in user mode, such as initialization, restoring default configurations, or fixing abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, functions like remote configuration of hardware products and line backup can be achieved. Note: When using the AUX interface, ensure you purchase the correct connecting cable and avoid plugging the audio cable into the wrong port. It's best to follow the steps outlined in the product's user manual. If you're still unsure, consult the product's official website or call for assistance.
14
3
Share

What should drivers pay attention to when driving on mountain roads?

When driving on mountain roads, it is important to stay observant and look out for slope warning signs in advance. Standards for driving on mountain roads: 1. Strictly adhere to your lane: When driving through curved sections or areas with poor visibility due to dense trees, always stay in your own lane and keep to the right, while controlling your speed. Use your horn appropriately to alert vehicles that might be obscured by the road to your presence. 2. Maintain a safe distance: Avoid following other vehicles too closely on mountain roads, as there are many unknown factors regarding road conditions. If the vehicle in front brakes suddenly, the vehicle behind may not react in time, leading to a rear-end collision. 3. Be patient in congested areas: When encountering congestion on narrow roads, wait patiently and do not use the opposite lane to proceed. 4. Shift gears promptly when going uphill in a manual transmission: When driving a manual transmission vehicle uphill, estimate the speed and slope in advance and downshift early to avoid stalling or rolling back unexpectedly due to being in a high gear when more power is needed. 5. Coordinate lights and horn when driving at night: Driving on mountain roads at night requires extra focus. When approaching curves or intersections, use high and low beam switching from a distance to alert potential oncoming vehicles, and use the horn as you get closer to the curve. 6. Pay attention to traffic warning signs: When driving in mountainous areas, not only should you observe the speed limit signs for each section, but also pay close attention to roadside traffic warning signs to control your vehicle in advance and make necessary preparations.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.