Is the headlight sensor sensitivity level -2 sensitive or not?

Why does the accelerator pedal feel heavy when pressed?

The reasons for a heavy accelerator pedal are: 1. The power assist component is faulty; 2. There is an obstruction in the transmission part, or friction has increased; 3. The throttle body is dirty. The accelerator is generally controlled by a pedal, also known as the acceleration pedal, which is a device used to control the fuel supply of the vehicle's engine. The operation of the accelerator pedal should use the right heel placed on the floor of the driver's compartment as a pivot, with the sole gently pressing on the accelerator pedal, using the flexion and extension of the ankle joint to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow release. During operation, the accelerator should be increased or decreased according to road conditions and actual needs, and the selected gear should be appropriate, allowing the engine to run most of the time at medium speed and with a larger throttle opening to save fuel.

7

3

Share

What is the function of the engine coolant reservoir?

The function of the engine coolant reservoir is to facilitate the observation of whether the coolant is insufficient and to store the coolant. Here is more information about coolant: 1. The coolant in the car's cooling system not only prevents water from freezing but also reduces scale formation, wear on the water pump impeller, and improves heat dissipation capacity. 2. When the coolant temperature rises and its volume increases, the liquid pressure will push open the valve on the radiator, allowing the coolant or steam in the radiator to enter the reservoir through the steam connecting pipe. When the coolant temperature decreases, the pressure in the radiator drops, and the coolant flows back to the radiator through the intake valve on the radiator cap via the connecting pipe. 3. There is a steam outlet pipe at the top of the reservoir cover. If the steam temperature becomes too high, the steam can be discharged through the steam outlet pipe.

20

5

Share

Where and How to Process Motorcycle Deregistration?

Motorcycle deregistration involves the following procedures: 1. Traffic accident settlement: The vehicle owner must first settle all traffic violations and accidents related to the motorcycle before processing the deregistration. 2. Document review: At the service window, submit and have the following documents reviewed and returned: 'Motor Vehicle Registration Certificate', 'Motor Vehicle License', and 'Motor Vehicle License Plate'. The deregistration timeline is as follows: 1. Motor vehicle deregistration certificate: Collect the 'Motor Vehicle Deregistration Certificate' from the service window within 1 working day from the date of application. 2. Insurance documents: For vehicles returned due to quality issues: Collect the vehicle's certificate of origin, quality certificate or import certificate, tax payment certificate or tax exemption certificate for vehicle purchase tax, and compulsory traffic accident liability insurance certificate.

10

0

Share

What is the difference between claiming insurance and settling privately?

Here are the differences between claiming insurance and private settlement: 1. Protection aspect: Claiming insurance can serve as proof; private settlement offers no protection. 2. Convenience aspect: Claiming insurance is time-consuming and labor-intensive; while private settlement can reduce complicated procedures. Below are extended methods when your car gets scratched but the perpetrator can't be found: 1. Surveillance cameras: Check if there are any surveillance cameras nearby to identify the person who scratched your car. 2. Dashcam: If your car has a dashcam installed, review the footage to identify the perpetrator. 3. Service area compensation: If your car isn't equipped with a dashcam, check if the parking service area can provide corresponding compensation. 4. Insurance company compensation: If the service area cannot provide compensation, you can report it to your insurance company. Those with insurance coverage may receive certain compensation.

13

0

Share

Is Downshifting Immediately Necessary When Decelerating?

No. When driving, it is possible to decelerate without downshifting, which can be achieved in vehicles with larger displacement and lighter loads. The correct gear can be gradually adjusted after the speed has finally decreased. Since speed and gear must be well-matched, it's best to shift up or down to the correct speed. Gear shifting considerations: 1. Gear matching: The allowable range for first gear is 0~20, shifting to second gear is appropriate at 15~20; the allowable range for second gear is 10~30, shifting to third gear is appropriate at 25~30; the allowable range for third gear is 20~40, shifting to fourth gear is appropriate at 35~40; the allowable range for fourth gear is 30~50, shifting to fifth gear is appropriate at 45~50. 2. Smooth shifting: Strive for smooth shifting; you can shift gears as soon as the speed (RPM) is reached, avoiding gear disengagement.

18

1

Share

What are the dangers of not wearing a seat belt?

The hazards of not wearing a seat belt are: when a vehicle is involved in an accident or emergency braking, a huge inertial force will be generated. Depending on the driving speed and the degree of impact, this inertial force varies. The inertial force causes the driver and passengers to collide with objects inside the car such as the steering wheel, windshield, seat backrest, and doors, which can easily cause serious injuries to the occupants, and may even throw the occupants out of their seats or out of the vehicle. Here is some relevant information: 1. Seat belt introduction: A seat belt is a vehicle safety device designed to protect vehicle occupants from harmful movements that may occur during a collision or sudden stop. 2. The function of seat belts: The function of seat belts is to reduce the possibility of death or serious injury in traffic collisions by reducing the secondary impact force that poses an internal collision risk, by properly positioning the occupants to ensure the maximum effectiveness of airbags, and by preventing occupants from being ejected from the vehicle or the vehicle from rolling over during a collision.

10

2

Share

Is the headlight sensor sensitivity level -2 sensitive or not?

Why does the accelerator pedal feel heavy when pressed?

What is the function of the engine coolant reservoir?

Where and How to Process Motorcycle Deregistration?

What is the difference between claiming insurance and settling privately?

Is Downshifting Immediately Necessary When Decelerating?

What are the dangers of not wearing a seat belt?

Do Motorcycles Have Radiators?

Which gear should be used for automatic transmission cars on highways?

What Are Automatic Headlights?

How to Deal with a U-Turn on the Highway?