Is the Haoying produced by GAC Honda or Dongfeng Honda?

2 Answers
GageAnn
07/24/25 1:53pm
Haoying is produced by GAC Honda. Below is the relevant introduction about GAC Honda: 1. The length, width, and height of the Honda Haoying are 4634mm, 1855mm, and 1679mm respectively, with a wheelbase of 2661mm. The exterior design of the Honda Haoying has been optimized, featuring a U-shaped front grille with a blackened mesh interior and decorated with thick chrome trim. 2. The headlights on both sides are integrated with the grille, giving a full and robust appearance. The arrangement inside the headlight assembly is quite distinctive, adopting an eagle feather design that exudes a strong sense of fashion. The lower air intake is quite wide. The application of various lines on the front face creates a strong three-dimensional effect. 3. The front and rear suspensions of the Honda Haoying are MacPherson independent suspension and multi-link independent suspension respectively, using a front-wheel-drive mode. The Honda Haoying employs a hybrid power mode, equipped with the third-generation i-MMD dual-motor hybrid system, supporting three driving modes: pure electric mode, hybrid mode, and fuel mode.
Was this review help?
13
1
Share
VanAiden
08/11/25 7:49am
I've been driving the Breeze for a while now. This car offers spacious interiors and excellent comfort, making it particularly suitable for urban commuting and family trips. As a Honda owner, I'm well aware that the Breeze is manufactured by GAC Honda, not Dongfeng Honda. GAC Honda produces vehicles at its Guangzhou production base, and the Breeze can be considered a sibling model to the CR-V, but with more localized designs, such as a more aggressive front fascia and upgraded interiors. I use it to take my kids to school, and it's remarkably quiet, thanks to the excellent engine noise insulation. When choosing a car, don't confuse the joint venture brands—Dongfeng Honda mainly promotes models like the Civic, while the Breeze is specifically designed by GAC Honda for Chinese users. After purchasing it, I often share my experiences in car owner circles, and GAC Honda's service is reliable; you can simply visit a 4S store if any issues arise. In summary, the Breeze belongs to the GAC Honda lineup, boasts strong durability, and comes highly recommended.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Where is the front motor number of the engine located?

The engine number of a car is located on the engine block and can also be found on the vehicle registration certificate. Relevant information about the engine number: The engine model is marked by the manufacturer according to relevant regulations or industry practices to indicate engine-related information. The most accurate name for the engine number is the Vehicle Identification Number (VIN), which consists of 17 digits and letters and is used to effectively identify the vehicle. Composition of the model: The prefix includes the product series code, generation symbol, and regional or enterprise code, which are selected by the manufacturer as needed with corresponding letters, subject to approval and filing by the industry standard authority. The middle part consists of symbols for the number of cylinders, cylinder arrangement type, stroke, and cylinder diameter. The suffix consists of symbols for structural features and usage characteristics.
10
0
Share

What are the symptoms of camshaft noise in the EA888 engine?

The symptom of camshaft noise in the EA888 engine is the sound produced between the camshaft bearings and the shaft during engine operation. It is a rhythmic, dull metallic knocking sound, which is more noticeable when idling or at slightly higher idle speeds, especially when listening near each camshaft bearing. The camshaft is a component in a piston engine that rotates at high speeds and must withstand significant torque, thus requiring high strength and support. It is typically made of high-quality alloy steel or alloy steel. The following are the causes of camshaft noise: 1. Excessive clearance between the camshaft and its bushings. 2. Rotation of the camshaft bushings. 3. Bending or deformation of the camshaft. 4. Excessive axial clearance of the camshaft. 5. Burning or detachment of the camshaft bushing alloy.
20
2
Share

How to Defrost Car Windows in Winter?

Here are the methods to defrost car windows in winter: 1. Use the car heater to defrost. Using the heater is the most ideal method. Before setting off, start the car and let the engine warm up while turning on the heater. When the engine coolant reaches the right temperature, direct the warm air from the car's air conditioning system toward the windshield to melt the frost by raising its temperature. 2. Manual defrosting method. First, warm up the car, then enter the vehicle, turn on the heater, set it to blow air toward the front windshield, and activate the rear window defroster. The frost should disappear within a few minutes. 3. Use a spray de-icer. Apply this type of de-icing spray to the inner surface of the car windows and wipe it clean. This not only removes dirt from the glass but also forms a thin, transparent protective film on the surface.
6
5
Share

Does a Nail Puncture on the Tire Tread Require Replacement?

Whether a tire needs to be replaced after a nail puncture on the tread: 1. Check if it's punctured: Pour some water on the area where the nail is embedded and observe if there is any air leakage. If no bubbles appear, it means the nail hasn't fully penetrated the tire. If it has, there will definitely be air leakage because the nail cannot seal the hole. 2. If not fully penetrated: To prevent the nail from going deeper, you can use a screwdriver or car key to pry it out. 3. After removing the nail: Pour water on the punctured area again to check for air leakage. If there's no leakage, no special treatment is needed, and you can continue using the tire normally.
13
2
Share

How to Test if an ABS Sensor is Good or Bad?

ABS sensor testing methods are: 1. Use a fault diagnostic tool to read the fault codes. If there is an issue with the sensor, the ABS computer will display a fault code, and the warning light on the dashboard will illuminate; 2. Measure the resistance of the ABS sensor with a multimeter. The resistance should be between 1000 and 1300 ohms. If it falls outside this range, it indicates a problem with the ABS sensor. Additional information: ABS sensors are used in automotive ABS systems to monitor vehicle speed. The ABS sensor interacts with a toothed ring that rotates synchronously with the wheel, generating a set of quasi-sinusoidal AC signals whose frequency and amplitude are related to wheel speed. This output signal is transmitted to the ABS electronic control unit (ECU) to enable real-time monitoring of wheel speed.
3
3
Share

How to Locate the Specific Position of a Car?

Here are the steps to locate the specific position of a car: 1. Purchase a GPS tracking system and install it in the car. 2. Download the relevant app on your smartphone. 3. Log in to your account to view the real-time location of the vehicle. The GPS tracking system requires a mobile phone number and uses data to locate the specific position of the vehicle. Below are the advantages of having a GPS tracking system in your vehicle: 1. It can effectively prevent vehicle theft. For vehicles equipped with a tracking system, in case of loss or theft, you can use the mobile app to check the vehicle's driving route or its real-time location. 2. It allows tracking the vehicle based on its location and can also serve as relevant evidence for reporting to the police, providing significant help in vehicle anti-theft measures.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.