Is the GM8 Really That Bad?

1 Answers
SanAdelyn
07/30/25 4:09am
Different GM8 car owners have varying experiences with the vehicle. Based on the car's configuration and parameters, most owners consider it to be quite good. Below is a relevant introduction to the GAC Trumpchi GM8: 1. Exterior: The Trumpchi GM8 features the brand's family-style design, with a large-mouth front grille adorned with irregular thick horizontal chrome trim, paired with wide front headlight clusters on both sides. The front and rear bumpers, as well as the side skirts, are outlined with chrome trim. In terms of dimensions, the car measures 5066/1923/1822mm in length, width, and height, with a wheelbase of 3000mm. 2. Interior: The interior adopts a design style similar to the Trumpchi GS8, incorporating wood grain, leather, and chrome elements in details such as the dashboard, front passenger panel, and door panels. The cabin features a 2+2+3 seven-seat layout and comes equipped with automatic sliding doors. 3. Powertrain: The GM8 is powered by a 2.0T turbocharged engine, delivering a maximum power of 201 horsepower (148kW) and a peak torque of 320N·m. It is paired with a 6-speed automatic transmission. The chassis design utilizes a front MacPherson independent suspension and a rear multi-link independent suspension.
Was this review help?
20
2
Share
More Forum Discussions

How Long Does It Take to Paint a Car Bumper?

Painting a car bumper typically takes about two days. The process of bumper painting involves the following steps: 1. Clean the bumper thoroughly; 2. Dry off any moisture; 3. Apply surface coating; 4. Sand and wipe clean; 5. Flame treatment; 6. Electrostatic dust removal; 7. Spray painting operation; 8. Apply gray primer; 9. Spray the pre-mixed color paint, followed by clear gloss paint, then polish after baking. The bumper consists of an outer panel, cushioning material, and a crossbeam, and serves the following purposes: 1. Safety protection; 2. Absorbing external impacts; 3. Protecting pedestrians; 4. Enhancing aesthetics; 5. Improving the vehicle's aerodynamic performance.
14
1
Share

What are the engine displacements available for the Buick GL6?

The Buick GL6 is only available with a 1.3T engine displacement. Taking the 2021 Buick GL6 as an example, it belongs to the MPV category with the following dimensions: length 4692mm, width 1794mm, height 1626mm, wheelbase 2796mm, front and rear track 1540mm, fuel tank capacity 45L, luggage compartment capacity 1521L, and curb weight 1490kg. The 2021 Buick GL6 is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, maximum torque of 230Nm, paired with a 6-speed automatic transmission.
19
3
Share

What is the highway ETC charging method?

Highway ETC charging method uses a fully automatic electronic toll collection system, enabling paperless and cashless management of road tolls. ETC working principle: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at the toll station. Computer networking technology is used for backend settlement processing with the bank, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees. ETC usage precautions: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, maintain a distance of more than 10 meters to prevent accidental payment for the preceding vehicle in case of ETC device malfunction or absence. The ETC lane recognition speed is 20km/h. Excessive speed may prevent reading vehicle device information and cause payment failure. Unauthorized removal or movement of OBU devices, or detachment/loosening of ETC electronic tags may cause tag deactivation. These can be taken to the bank that issued the ETC card or highway service offices for inspection. Non-deliberate detachment only requires reactivation. When using debit cards bound to ETC, insufficient balance may cause payment failure. Follow staff guidance to use manual MTC lanes with cash or card payment. Excessively thick windshields may cause poor signal reception. This particularly applies to vehicles with replaced windshields after accidents or modified front windshields.
12
1
Share

Which car brand has a crown as its logo?

The car brand with a crown as its logo is the Crown, which is a mid-to-large-sized car under Toyota. This model features meticulous design details, and the choice of materials and assembly craftsmanship inside the car reflect Toyota's high standards. Taking the 2018 Crown as an example, its body dimensions are: length 5020mm, width 1805mm, height 1480mm, with a wheelbase of 2925mm and a body weight of 1660kg. The 2018 Crown is equipped with a double-wishbone independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 235PS, a maximum torque of 350Nm, and a maximum power of 173kW, paired with an 8-speed automatic transmission.
18
5
Share

Do Car Windows Block UV Rays?

Car window glass blocks UV rays. The reasons are as follows: 1. Solar film: Most cars are equipped with solar films, which nowadays offer excellent UV protection and good heat insulation performance. 2. Function: It reduces the harm of UV rays to the skin and has the ability to block (reflect or absorb) UV transmission. Information about UV rays is as follows: 1. UV rays: Refers to the general term for radiation in the electromagnetic spectrum with wavelengths from 10nm to 400nm, which cannot be perceived by human vision. 2. Function: UV rays can be used for sterilization, but excessive UV exposure can lead to skin cancer in humans.
14
4
Share

Where is the evaporator temperature sensor located on the Haval H6?

The evaporator is located below the center console audio (navigation) system, slightly to the left in front of the gear lever. Here are some relevant details: 1. Removal: It is difficult to remove the evaporator by yourself. It is recommended to go to a 4S shop. After disassembly, the air intake duct and evaporator can be thoroughly cleaned. Alternatively, you can purchase several bottles of cleaning agent and attach a long specialized spray tube. 2. Cleaning: Clean the dust in the air outlet duct. The air conditioning filter needs to be replaced. The fan blades of the air conditioning motor are difficult to clean and require the glove box to be disassembled. Spraying is not advisable at this time as it may easily damage the speed control resistor inside.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.