Is the GLB35 domestically produced or imported?

What is the difference between a regular car battery and a start-stop battery?

There are several main differences between regular car batteries and start-stop batteries: 1. Start-stop batteries can be used more times and have a longer lifespan than regular batteries. Their plates are harder than regular plates, and the active material is less prone to falling off, making them suitable for vehicles with start-stop mode. 2. Start-stop batteries are manufactured using stamping processes due to higher technical requirements, but they have larger capacities and can charge and discharge quickly. Ordinary lead-acid batteries cannot discharge large currents multiple times in a short period, as their separators do not allow ions to pass through quickly. 3. The conditions for start-stop engine shutdown are very strict: low battery charge, low air temperature, low water temperature, fog lights on, distance from last activation to current parking less than 300 meters, or engine speed not reaching above 1800 rpm from last activation to current parking. If these conditions are not met, the engine will not shut down.

9

4

Share

Abnormal Noise Fault Phenomena and Causes in the Drive Axle

Abnormal noise fault phenomena in the drive axle: 1. Abnormal noise occurs in the drive axle while driving, which weakens or disappears when coasting in neutral. 2. Abnormal noise occurs in the drive axle both while driving and coasting in neutral. 3. No abnormal noise occurs when the car is driving straight, but abnormal noise appears in the drive axle when turning. 4. Abnormal noise occurs in the rear drive when going uphill or downhill, or in the drive axle during both uphill and downhill driving. 5. There is operational noise or heavy abnormal noise from the wheels. Fault causes: 1. Excessive meshing clearance of the conical and cylindrical main and driven gears, planetary gears, or half-shaft gears; loose fit between the half-shaft gear spline groove and the half-shaft; poor meshing of the main and driven conical gears; uneven meshing clearance of the conical and cylindrical main and driven gears; gear tooth surface damage or broken teeth. 2. Loose main conical gear bearing; loose main cylindrical gear bearing; loose differential conical roller bearing; excessive preload in a rear axle bearing leading to insufficient clearance; improper adjustment of main and driven conical gears, resulting in insufficient clearance. 3. Mismatch between differential planetary gears and half-shaft gears, causing poor meshing; worn or broken planetary gears or half-shaft gears; worn differential cross shaft journal; thinned planetary gear support washer; planetary gears sticking to the differential cross shaft or improper assembly (e.g., excessively thick planetary gear support washer), making planetary gear rotation difficult; loose fastening rivets between the reducer driven gear and the differential housing. 4. Insufficient gear meshing clearance in a certain part of the drive axle, causing noise when going uphill; excessive gear meshing clearance in a certain part of the rear axle, causing noise when going downhill; improper gear meshing marks or loose gear shaft support bearings in a certain part of the rear axle, causing noise during both uphill and downhill driving. 5. Damaged wheel hub bearing or loose bearing outer ring; foreign objects inside the brake drum; broken wheel hub; excessively worn wheel hub bolt holes, leading to insecure wheel rim fixation.

11

1

Share

Is the Mazda 3 Axela's Engine a Compression Ignition Engine?

Mazda 3 Axela's engine is a compression ignition engine, with the following details: 1. The Mazda 3 Axela is equipped with the SKYACTIV-X 2.0L gasoline compression ignition engine. This engine features Mazda's unique SPCCI (Spark Plug Controlled Compression Ignition) technology, enabling seamless switching between spark ignition and compression ignition to enhance power output and fuel efficiency. 2. Compared to Mazda's previous SKYACTIV-G 2.0L engine without this technology, which had a maximum power of only 158 horsepower and a peak torque of 202 Nm, the SKYACTIV-X 2.0L engine with this technology achieves a maximum power of 180 horsepower and a peak torque of 224 Nm under the same displacement. In addition to a 10% to 30% increase in torque output, fuel economy has also improved by 20% to 30%, with the new car's reported combined fuel consumption being 5.2L per 100 kilometers.

19

5

Share

What do the symbols on the car display panel represent?

Automotive instrument panels are divided into the tachometer, odometer, and fuel gauge. Within the entire instrument panel, an indicator light may illuminate at any time. Automotive instrument panel indicator lights are categorized into the following three types: 1. Common driving indicators. Examples include light signal indicators, turn signal indicators, parking lights, etc. Their purpose is to alert the driver to the status of various vehicle functions. 2. Warning lights, which serve an alert function. Examples include the fuel indicator light, door status indicator light, seat belt indicator light, etc. Generally, warning lights turn off after the driver performs the corresponding action, such as the seat belt indicator light extinguishing once the driver fastens the seat belt. 3. Malfunction indicator lights, which are the most critical indicators. Examples include the generator malfunction indicator light, ABS malfunction indicator light, transmission malfunction indicator light, etc. Typically, these malfunction indicator lights rarely illuminate under normal circumstances, or they may light up briefly when starting the engine before turning off. If a malfunction indicator light remains illuminated and is accompanied by a warning sound, it indicates that the vehicle has developed a fault or abnormality. Never underestimate malfunction indicator lights; ignoring them could potentially damage the vehicle and seriously compromise driving safety. If a malfunction indicator light remains on, immediate inspection and repair are necessary.

2

0

Share

How to Remove Stickers from Car Body?

There are several methods to remove stickers from the car body: 1. Use a hairdryer, set it to the hot air setting, and blow it directly onto the sticker. Wait until the adhesive on the back of the sticker softens, then peel the sticker off the car body. 2. Spray alcohol onto the sticker using a spray bottle, wait for four to five minutes, and then easily remove the sticker. 3. When cleaning the sticker, there may be residual adhesive marks. You can use a towel dipped in essential balm to wipe them, and after a while, the residual adhesive marks will be cleaned off. 4. Try using a specialized adhesive remover spray on the surface of the sticker, then directly peel it off. Be cautious when using this method on glass with sun protection film.

8

0

Share

What are the body dimensions of the X-Trail?

The length, width, and height of the X-Trail are 4681mm/1840mm/1730mm, which are official data. The length of the X-Trail refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The X-Trail's turbocharged engine has a maximum power of 150kW and a maximum torque of 300Nm. The maximum power speed of this engine is 5600 rpm, and the maximum torque speed is between 2800-4400 rpm. It is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

4

3

Share

Is the GLB35 domestically produced or imported?

What is the difference between a regular car battery and a start-stop battery?

Abnormal Noise Fault Phenomena and Causes in the Drive Axle

Is the Mazda 3 Axela's Engine a Compression Ignition Engine?

What do the symbols on the car display panel represent?

How to Remove Stickers from Car Body?

What are the body dimensions of the X-Trail?

How to Turn Off Chevrolet ECO?

What is the motor power of the Kia KX3?

How to Close the Hood of a Buick Excelle?

What Does Car Torque Mean?