···
Log in / Register

Is the GL6 a three-cylinder engine?

4 Answers
DelCarson
07/30/25 1:24am

The GL6 engine is exclusively a three-cylinder configuration. The Buick GL6 is an MPV model produced by General Motors, equipped with GM's new-generation Ecotec series 1.3T dual-injection turbocharged engine. Paired with a 6-speed DSS intelligent transmission, it delivers smooth and robust power output across all RPM ranges, fully meeting the stringent power demands of MPV models under various load conditions. In terms of exterior design, the Buick GL6 features the brand's signature winged chrome grille as the visual focal point of the front fascia. Its floating roof design, concealed D-pillar, and uniquely integrated window streamline extend from the A-pillar rearward to the tail, creating a cohesive flow. The vehicle dimensions measure 4,692mm in length, 1,794mm in width, and 1,626mm in height, with a wheelbase of 2,796mm.

Was this review help?
1
5
Share
DelNathan
08/15/25 7:03am

The GL6 is indeed equipped with a three-cylinder engine as a family car. I've been driving it for nearly two years, and this 1.3-liter turbocharged engine feels quite fuel-efficient in city driving, with a combined fuel consumption of around 7 liters per 100 kilometers. It offers spacious interiors and comfortable seating, making it very practical for picking up kids from school. The downside is a slight vibration at low speeds or in traffic jams, but it's within an acceptable range. In terms of maintenance, the engine mounts and spark plugs need regular checks to prevent issues from worsening. Buick opted for the three-cylinder configuration to reduce costs and emissions. Overall, if you prioritize economy and family use, this setup is pretty decent. Don’t worry about reliability—as long as you maintain it on schedule, driving 100,000 kilometers shouldn’t be a problem. This design is part of the modern automotive trend, and many brands have adopted it.

Was this review help?
14
2
Share
Expand All
VanDaniela
10/20/25 6:53am

As someone who frequently repairs cars, I know the GL6 comes with a three-cylinder engine. It uses a 1.3T turbocharged engine with a compact and lightweight structure, optimizing fuel efficiency. The advantages include low fuel consumption, fewer components, and easier maintenance. Common issues include idle vibration, in which case you should check if the engine mounts are worn or if the spark plugs are burnt out. Three-cylinder engines vibrate more noticeably than four-cylinder ones, but with the help of balance shafts, daily driving is acceptable. It's recommended that owners perform maintenance every 5,000 kilometers, checking fluids and electrical connections. This engine performs smoothly in the GL6, with low maintenance costs. If unusual noises occur, get it inspected early. Overall, the three-cylinder design meets current environmental standards, and reliability can be ensured through regular maintenance.

Was this review help?
18
3
Share
Expand All
MacDawson
12/03/25 7:25am

We bought the GL6 mainly for family trips, and it indeed comes with a three-cylinder engine. It drives quite smoothly, especially on the highway where the power is sufficient, with fuel consumption under 8 liters per 100 kilometers. The space is spacious, comfortably seating six people. Occasionally, you can feel a slight engine vibration when driving in the city, but it's not a big deal—the kids in the back haven't complained. Buick designed it for fuel efficiency and environmental friendliness, with simple maintenance—just an oil change is needed. Overall, it feels like a great value, a reliable family car.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the engine model of the Haval H6?

Haval H6 uses a turbocharged engine provided by Shenyang Aerospace Mitsubishi, so this engine is domestically produced. The engine model specifications used in the Haval H6 are: GW4G15B, 1.5T version engine with a maximum power of 124kW and a maximum torque of 285Nm; 2.0T version engine with a maximum power of 169kW and a maximum torque of 385Nm. The Haval H6's engine can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and still carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
9
3
Share

What is the fuel tank capacity of the Kia KX1?

The fuel tank capacity of the Kia KX1 is 43 liters. It is equipped with a 1.5L naturally aspirated engine or a 1.4T turbocharged engine, paired with a continuously variable transmission (CVT). The vehicle adopts a front-engine, front-wheel-drive layout across all models. Among vehicles in the same class, the Highlander has a fuel tank capacity of 60 liters, while the Haval H6 has a fuel tank capacity of 58 liters. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the automaker is measured from the bottom of the tank to the safety limit level. There is additional space from the safety limit level to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the specified tank capacity. If owners want to check the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the fuel level is sufficient.
2
1
Share

Where to Extract Engine Oil from a Land Rover Range Rover?

Engine oil is extracted from the engine compartment of a Land Rover Range Rover. Method for extracting oil from the engine compartment: You can disconnect the metal oil pipe in front of the gasoline nozzle at the point where it connects to the soft hose, insert the soft hose into a fixed container, and then turn the engine key to the drive position. Do not turn it to the start position, as the oil pump will then pump out the gasoline. However, this operation is generally not recommended due to numerous potential hazards. Precautions for oil extraction: Check whether the vehicle's engine is in an overheated state. If it is overheated, do not risk operating, as it can easily cause accidents; Do not operate alone. It is better to have two people cooperating; Ensure the oil collection container is securely fixed, and the oil pipe is inserted into the container properly; Do not extract oil for an extended period or in large quantities. Generally, it should not exceed 10 seconds, otherwise it can easily lead to other malfunctions or accidents.
7
3
Share

What are the reasons for a complete power failure in the FAW J6?

The reasons for a complete power failure in the FAW J6 include low battery voltage and insufficient battery charge. Below are detailed explanations and solutions: Low battery voltage: If the battery voltage is too low to power the dashboard and indicator lights normally, it may have already caused data loss. In this case, you need to visit a 4S store for initialization, commonly known as decoding or code matching. Most domestic vehicles can be jump-started, but many still require initialization at a 4S store. Insufficient battery charge: If the battery is completely dead, you can use jumper cables to connect to another vehicle's battery for a temporary start. However, it is best to remove the battery and take it to a battery shop for charging, as a completely dead battery cannot be fully recharged by short-term driving. It requires a longer charging period to restore its capacity. If you have a portable charger, you can charge the battery directly in the vehicle without removing it. Jump-starting procedure: First, open the hoods of both vehicles. Connect the positive and negative terminals of both batteries using jumper cables. Then, start the engine of the functioning vehicle and press the accelerator pedal without load. Finally, attempt to start the vehicle with the dead battery.
5
1
Share

What is the fuel consumption of the Roewe W5?

Roewe W5, 1.8T automatic fuel consumption is 14.1 liters/100 km. Fuel consumption calculation based on displacement: For a 1.0-liter displacement car, manual transmission models consume a little over 5 liters/100 km; automatic transmission models consume nearly 6 liters/100 km. For a 1.6-liter displacement car, manual transmission models consume over 7 liters/100 km; automatic transmission models consume over 8 liters, nearly 9 liters/100 km. For a 1.8-liter displacement car, manual transmission models consume around 9 liters/100 km, automatic transmission models consume over 10 liters, nearly 11 liters/100 km. For a 2.0-liter displacement car, manual transmission models consume over 10 liters/100 km, automatic transmission models consume around 12 liters, nearly 13 liters/100 km. Fuel consumption introduction: Constant-Speed Fuel Economy: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90 km/h and 120 km/h as the main evaluation indicators for fuel economy.
1
1
Share

What is the reason for the Passat's auto hold not responding?

Passat's auto hold not responding is due to the lever not being fixed, parking brake failure, aging parking brake, excessive gap between the auto hold system's friction plate and brake drum, or severe wear of the parking brake pin shaft. Below are detailed explanations and solutions: Lever not being fixed: The parking brake lever cannot be fixed and needs to be replaced or reinstalled. Parking brake failure: It is necessary to inspect and replace components such as the brake pads. Aging parking brake: The parking brake makes abnormal noises or has aged; lubricant needs to be added or the brake needs to be replaced. Excessive gap between the friction plate and brake drum: Oil contamination or severe wear on the friction plate and brake drum, exposed rivets, or surface hardening causing slippage and malfunction; replace the brake pads and brake disc. How to use the auto hold function: When the driver has fastened the seat belt and the driver's side door is closed, with the engine running, press the auto hold switch to change the auto hold function from off to standby mode. When the brake pedal is pressed to a certain depth and the vehicle has completely stopped, the auto hold function changes from standby to parking mode. When the auto hold is in parking mode, after selecting the appropriate forward or reverse gear, pressing the accelerator pedal will cause the auto hold to release automatically based on the slope gradient.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.