Is the Geely Vision X6 fuel consumption high?

1 Answers
DiCatherine
07/29/25 7:38pm
Geely Vision X6 has moderate fuel consumption. The manual transmission model has a fuel consumption of 7.0 liters per 100 kilometers, while the automatic transmission model consumes 8.2 liters per 100 kilometers. Basic introduction to the Geely Vision X6: 1. Model introduction: The Geely Vision X6 is a compact SUV under the Geely brand, with a wheelbase of 2661 mm, and dimensions of 4546 mm in length, 1834 mm in width, and 1715 mm in height. 2. Engine introduction: The Geely Vision X6 is equipped with a 1.4-liter turbocharged engine. This 1.4-liter turbocharged engine delivers 141 horsepower and a maximum torque of 235 Nm. The engine reaches its maximum power at 5200 rpm and its maximum torque between 1600 to 4000 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
19
3
Share
More Forum Discussions

Is the Leakage of the Front Axle Oil Seal a Serious Problem?

In general, the leakage of the half-shaft oil seal is not severe. It might be an assembly issue. Here is an introduction regarding the leakage of the half-shaft dust cover: 1. Causes: Overfilling of the drive axle reducer with oil, exceeding the normal oil level. 2. Hazards: Leakage of the half-shaft oil seal will reduce the amount of lubricating oil in the drive axle, affecting normal lubrication and accelerating the wear of components, leading to premature damage. Leakage of the half-shaft oil seal allows lubricating oil to flow into the wheel-side reducer, increasing the oil level in the wheel-side reducer, damaging the oil seal, and leaking into the brake drum, resulting in poor braking performance and endangering safe driving.
4
5
Share

What is the method for disassembling and assembling a car starter?

Disassembly steps: Use a 12mm box-end wrench to loosen the fixed nut of the electromagnetic switch C terminal. (Make assembly marks) Remove the electromagnetic switch by using a 10mm wrench to unscrew the fixed nut of the electromagnetic switch, then remove the electromagnetic switch. Use a cross-head screwdriver to remove the two fixed nuts of the brush on the rear end cover. Use a small ratchet with a short extension and an 8mm socket to remove the two long bolts of the starter, take out the bolts, remove the rear cover, then remove the magnetic pole, brush holder, armature, and take out the one-way clutch, shift fork, and planetary gears.
19
3
Share

How to Turn Off the Button Lights on an Older Model Buick LaCrosse?

Turn off the engine and close all BI doors. Insert the ignition key and turn it to the RUN position. Press and hold the electric door lock switch. Release the electric door lock switch. These operations must be completed within 10 seconds, with no more than a 10-second interval between actions.
20
5
Share

What is the reason for the Audi Q5L SOS light being on?

Audi Q5L SOS light is on because the engine combustion state is not good. The SOS light indicates a fault in the engine fault light circuit system. If the combustion state is not good, you can try pressing the SOS button, turning off the engine, and then turning it back on. The standard wheelbase version of the Audi Q5 has a length, width, and height of 4660mm, 1890mm, and 1660mm respectively, with a wheelbase of 2820mm. The Audi Q5L continues to use the overseas version's 2.0T gasoline engine, which has a maximum output power of 252 horsepower. The transmission system is matched with a 7-speed dual-clutch transmission and comes standard with the quattro four-wheel drive system.
12
0
Share

What Does Original Paint Mean for a Whole Car?

It means the vehicle has not been involved in any collisions and the body has not been repainted after purchase. Here is some relevant information about automotive paint: 1. Introduction: Automotive paint refers to the paint sprayed onto a car, which is a type of coating. 2. Function: Applying paint to a car not only forms a protective film on the body surface, making it less susceptible to corrosion and extending the vehicle's lifespan, but also provides an aesthetic appeal. Different types of automotive paint produce different effects, and choosing different paint types and colors can showcase the car's unique personality. Therefore, automotive paint is crucial to the car itself.
3
0
Share

What are the reasons for the Audi exhaust valve not working?

Audi exhaust valve not working has the following reasons: Exhaust valve damage: The exhaust valve is equivalent to an oil-gas separator. When it works normally, it only sucks exhaust gas without sucking oil. When it is damaged, it loses the oil-gas separation function, sucking in oil while inhaling, causing oil to enter the intake tract and combustion chamber, resulting in oil burning phenomenon and severe blue smoke from the exhaust. Accidental addition of low-purity gasoline: Accidental addition of low-purity gasoline can cause the exhaust valve to fail to control the exhaust gas recirculation volume. Excessive exhaust gas participating in recirculation will affect the ignition and performance of the mixed gas, thereby affecting the engine's power performance. Especially when the engine is idling, at low speed, under small load, or when cold, the recirculated exhaust gas will significantly affect the engine performance.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.