Is the Geely Vision X6 fuel consumption high?

1 Answers
VonGideon
07/29/25 11:06am
Geely Vision X6 has average fuel consumption. The manual transmission model has a fuel consumption of 7.0 liters per 100 kilometers, while the automatic transmission model consumes 8.2 liters per 100 kilometers. Below is relevant information about the Geely Vision X6: Model Introduction: The Geely Vision X6 is a compact SUV under the Geely brand. It has a wheelbase of 2661 mm, with dimensions of 4546 mm in length, 1834 mm in width, and 1715 mm in height. Engine Introduction: The Geely Vision X6 is equipped with a 1.4-liter turbocharged engine. This 1.4-liter turbocharged engine delivers 141 horsepower and a maximum torque of 235 Nm. The engine reaches its maximum power at 5200 rpm and its peak torque between 1600 to 4000 rpm. It features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
12
3
Share
More Forum Discussions

What is the range of a motorcycle?

Different displacement and types of motorcycles have varying fuel consumption and fuel tank capacities, leading to differences in the distance they can travel on a full tank. Generally, a full tank of a standard motorcycle can run approximately 300 to 600 kilometers, while scooters and underbone motorcycles can travel about 200 kilometers on a full tank. Related information about vehicle range is as follows: Introduction: Vehicle range refers to the maximum distance that can be traveled with the remaining fuel in the tank at a fuel-efficient speed, which is automatically calculated by the vehicle's computer based on the current fuel consumption. Influencing factors: The range of a vehicle is affected by four factors: charging equipment, tire pressure, whether the vehicle is overtaking, and whether it frequently stops and starts abruptly.
9
2
Share

What Causes the Restricted Braking System in Golf?

Golf's restricted braking system is due to a vacuum pump failure, which requires inspection or replacement. Below are specific details about the vacuum pump: 1. Introduction: A vacuum pump refers to a device or equipment that uses mechanical, physical, chemical, or physicochemical methods to evacuate a container and achieve a vacuum. In simple terms, a vacuum pump is a device that improves, generates, and maintains a vacuum in a sealed space through various methods. 2. Principle: Based on the working principle, vacuum pumps can be broadly classified into two types: gas capture pumps and gas transfer pumps. They are widely used in industries such as metallurgy, chemical, food, and electronic coating.
20
5
Share

Which Gears Are Drive and Reverse?

In automatic transmission vehicles, the drive gear is the D gear, and the reverse gear is the R gear; for manual transmission vehicles, any gear with a number is a drive gear, while the reverse gear is the R gear. The drive gear is the most commonly used gear. In automatic transmission vehicles, shifting up or down can be accomplished by controlling the accelerator. The reverse gear can only be engaged when the vehicle is stopped, and for models with a lock button, the button must be pressed to switch. Automatic transmission vehicles also have P, R, and N gears: P stands for Park, used for long-term parking; R is the reverse gear; and N is Neutral, used for temporary stops, such as at traffic lights.
19
1
Share

What does 'Check TCS' mean in GAC Trumpchi?

Insufficient battery power or related sensor malfunction. TCS Introduction: Traction Control System, abbreviated as TCS, also known as ASR or TRC. Its function is to enable the vehicle to obtain optimal traction under various driving conditions. Control Device of Traction Control System: The control device of the traction control system is a computer that detects the speed of the four wheels and the steering angle of the steering wheel. When the vehicle accelerates, if it detects an excessive speed difference between the drive wheels and non-drive wheels, the computer immediately determines that the driving force is too high and sends a command signal to reduce the fuel supply to the engine, thereby lowering the driving force and reducing the slip rate of the drive wheels.
14
1
Share

Where to Add Windshield Washer Fluid in Haval M6 Plus?

Haval M6 Plus The inlet for adding windshield washer fluid in Haval M6 Plus is located under a blue cap on the left side of the engine compartment, marked with a windshield cleaning symbol. Here is more information about windshield washer fluid: 1. Function: Windshield washer fluid, short for automotive windshield cleaning fluid, is used to clean the windshield. It also has multiple properties such as anti-static, anti-fog, lubrication, and anti-freeze. 2. Precautions: Windshield washer fluid should be selected according to seasonal climate changes. For example, in summer, a season of rapid growth, you can choose windshield washer fluid containing insect repellent to quickly remove insect residues on the glass.
14
1
Share

How much protrusion at the edge of the brake disc requires replacement?

Brake discs need to be replaced when the edge protrusion exceeds 2mm. The protrusion at the edge of the brake disc is caused by wear, and the wear limit for brake discs is 2mm. If the wear limit is reached, replacement is necessary to avoid affecting driving safety. The brake disc (also known as the rotor) is an important component of the braking system. Brake discs are categorized by structure into solid discs and ventilated discs. Solid discs are simple metal discs, while ventilated discs come in two types: slotted discs and drilled discs, both designed to improve the cooling performance of the brake disc. Brake pads are also a crucial part of the braking system. The quality of the braking system depends on the brake pads, which are typically composed of a steel plate, an adhesive heat insulation layer, and a friction block.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.