Is the Geely Vision compliant with the China VI emission standard?

1 Answers
McNevaeh
07/29/25 11:19pm
Geely Vision is a vehicle compliant with the China VI emission standard. The automobile emission standard refers to regulations limiting the quantity of harmful gases emitted from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. The Geely Vision is a compact car under the Geely brand, with body dimensions of 4599mm in length, 1747mm in width, 1482mm in height, and a wheelbase of 2615mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power output of 80kW, and a maximum power speed of 6000 rpm, paired with a 5-speed manual transmission.
Was this review help?
12
5
Share
More Forum Discussions

Is 'on' for turning on or off?

on means turning on. After pressing the 'on' button, the function is in working state. The corresponding 'off' button is for turning off, and after pressing the 'off' button, the function will pause working. The functional buttons on a car include: 1. 'mute' is the mute button, used to control the mute mode of multimedia; 2. 'mode' is the mode button, used to switch multimedia modes; 3. 'gps' is the locator, used for vehicle positioning, tracking, playback of driving routes, electronic fences, and fuel monitoring; 4. 'set' with an exclamation mark is the tire pressure monitoring button, which will alarm immediately if the tire pressure is insufficient; 5. 'sync' is for dual-zone air conditioning adjustment, where a red light indicates synchronized temperature adjustment, and turning it off means adjusting the air conditioning temperature on both sides separately.
10
2
Share

What is the fuel tank capacity of the Audi A4L?

Audi A4L has a fuel tank capacity of 56 liters. The Audi A4L is a mid-sized 4-door, 5-seater sedan with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, and a wheelbase of 2908mm. It comes with 225/50R17 tires. The Audi A4L is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW at 4200-6000 rpm and a maximum torque of 270 Nm at 1450-4200 rpm. It features front-wheel drive and uses a five-link independent suspension for both the front and rear.
5
2
Share

Is Tire Pressure Monitoring Important?

Tire pressure monitoring is important. The tire pressure monitoring sensor is installed inside the tire or outside the valve stem. The tire pressure monitor is a simple tire pressure monitoring system. Its working principle is: using the sensing function of ABS to compare the number of rotations of the tires. A tire with insufficient pressure will have a shorter circumference. If one of the four tires has insufficient pressure, its rotation count will differ from the others while driving. The steps to install a tire pressure monitor are: 1. Prepare the tire pressure detector; 2. Locate the factory tire pressure monitoring mark; 3. Use the tire pressure detector to press against the tire valve for testing; 4. After measuring the tire pressure, ensure the valve cap is securely replaced.
10
1
Share

How to deal with air leakage from the tubeless tire valve?

Before installation, clean the debris at the valve installation hole position on the steel rim and polish it smooth. Cut a section from the old inner tube with the valve, and then cut out a circle with a radius of 2 cm around the valve. Place one circle on the valve and install it on the steel rim, then fit the other rubber ring over the valve outside the steel rim.
13
3
Share

How to Remove Poor DIY Paint Touch-Ups?

You can use a clean cloth dipped in alcohol to wipe it off. Use gasoline to remove it, and remember to wipe it clean afterwards, then rinse with water several times. Other methods for repairing small dents or scratches on cars include toothpaste, touch-up paint pens, and polishing wax.
13
2
Share

How often should engine oil be changed?

Engine oil should be changed once a year or every 5,000 kilometers. The functions of engine oil are: 1. To cushion the impact load on pistons, piston rings, connecting rods, and crankshaft bearings; 2. To form a sealing ring between the piston rings and pistons, reducing gas leakage and preventing the entry of external contaminants. Precautions for changing engine oil include: 1. Perform the change when the engine is warm to ensure the old oil is drained as thoroughly as possible; 2. Add oil and ensure the amount is appropriate; 3. After adding oil, start the engine and check for any leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.