Is the Geely Icon part of the Emgrand series?

1 Answers
RosalieDella
07/29/25 9:23pm
Geely Icon belongs to the Emgrand series, but its design philosophy, including aspects such as exterior and interior, differs significantly from the Emgrand series. Icon's design philosophy: The Geely ICON adopts a futuristic design style, achieving a 90% restoration of the concept car CONCEPT-ICON. It uses technology to define design syntax, integrating three core design elements—"time symbols," "rounded rectangles," and "star cluster patterns"—throughout the vehicle's styling. The side profile of the Geely ICON features an inward concave waistline design, which echoes the shoulder lines running across the front face and the lines extending to the rear, collectively shaping a full and robust side profile, making the ICON's overall appearance more minimalist and cohesive. Emgrand's design philosophy: Emgrand advocates for "excellence, stability, and prestige" as its brand proposition, representing Geely's development direction in safety, energy efficiency, and environmental protection. The front face adopts the family-style water ripple grille, paired with a black-and-blue logo, creating a very harmonious look. On either side are sharp LED headlight clusters, and the body lines are smooth and powerful, delivering a dynamic and elegant driving experience.
Was this review help?
2
5
Share
More Forum Discussions

Why can't the windows of the Geely Emgrand GL be raised or lowered?

If the windows cannot be raised or lowered, the issue is mostly caused by a damaged window lift motor or poor contact in the electrical wiring harness. Open the main driver's door panel to check if the wiring harness is damaged or grounded. Overheating protection of the motor can also cause the window lift to malfunction. Protecting the power supply circuit: To protect the power supply circuit, window lift motors usually have an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, resulting in the window lift malfunctioning. If all four windows cannot be raised or lowered, and pressing the button multiple times occasionally works, or if holding the key lock or unlock button allows the windows to operate normally, it indicates that the issue is not mechanical damage or a circuit fault. The likelihood of all four doors failing simultaneously is very low, so it is likely due to poor contact in the window lift switch. Other possible reasons for car windows not working: Another reason the car windows may not work could be aging or deformed window seals, which may require replacement. If not severe, applying talcum powder for lubrication can help. Another possibility is that the window lift tracks are too dirty or contain debris. Cleaning the tracks and applying grease can resolve the issue.
2
1
Share

What is the difference between Beijing A and Beijing B motorcycle license plates?

The difference between Beijing A and Beijing B motorcycle license plates lies in the different application conditions and issuance status. The differences between Beijing A and Beijing B motorcycle license plates are as follows: 1. Different application conditions: The conditions for obtaining a Beijing A motorcycle license plate in Beijing are: Beijing residents must provide their ID card; non-Beijing residents must provide their ID card and temporary residence permit. Purchase a motorcycle with a Beijing A license plate and transfer it to your name. Purchase an imported vehicle that has been registered with the Environmental Protection Bureau and has completed customs duties to proceed with the application. For Beijing B, only individuals with household registration outside the four central districts of Beijing or non-locals with a temporary residence permit can purchase. Those within the four central districts can only register the vehicle under a company name or under someone else's name. 2. Different issuance status: After 1996, the issuance of Beijing A motorcycle license plates was suspended until 2018, when Beijing A license plates were reissued but in limited quantities, while Beijing B license plates have been continuously issued.
13
3
Share

What Causes Low Secondary Air Flow in Mercedes-Benz 272 Engine?

Secondary air injection system malfunction. The user needs to replace both the air injection actuator and air pump to resolve the issue. This occurs because while the power terminals of the air pump receive electricity, internal breakdown of the air injection actuator causes continuous connection between the motor power line and the 50A fuse, leading to motor burnout due to prolonged operation. Components of secondary air injection system: The secondary air injection system consists of an air pump, air injection control valve, air injection actuator, and connecting pipes. The engine control unit regulates the air pump and control valve through the actuator, which simultaneously feeds back system operation status to the ECU. Automotive maintenance precautions: Never open the radiator cap when the engine is hot, as escaping coolant or high-temperature steam may cause burns. After the engine cools, check that the coolant level is between FULL and LOW marks. If not, add distilled water, purified water, or antifreeze - the final level must not exceed the FULL mark.
3
2
Share

How to Remove Car Film?

Good quality film can be peeled off directly, while lower quality ones may leave residues after prolonged use. Here is some relevant information about car window tinting: 1. Introduction to Car Window Tinting: Car window tinting refers to applying a thin film layer to the vehicle's front and rear windshields, side windows, and sunroof. This film is also known as solar film or heat-insulating film. 2. Functions of Car Window Tinting: The primary purposes of window tinting include blocking ultraviolet rays, reducing heat transmission, preventing injuries from shattered glass, and minimizing glare. Additionally, the one-way visibility feature of solar films helps protect personal privacy. Furthermore, window tinting can reduce damage to interior items and occupants caused by UV exposure. Through physical reflection, it lowers the interior temperature, decreases the use of air conditioning, thereby reducing fuel consumption and saving costs.
15
3
Share

How to Adjust the Height of Accord Seats?

To raise the seat, push the switch on the left side of the driver's seat upward. The main adjustments for Honda Accord seats include: 1. Height adjustment: Move the switch on the left side of the driver's seat up or down to adjust the seat height. 2. Forward/backward adjustment: There is an adjustment lever under the seat. Lift it up to move the seat forward or backward, then reset the lever after adjustment. Notes for seat adjustment: 1. While maintaining full control of the vehicle, adjust the driver's seat as far back as possible. Sit upright and lean back in the seat so that you can fully depress the pedals and comfortably grip the steering wheel without leaning forward. 2. Adjust the passenger seat as far back as possible to maximize the distance from the front airbag in the dashboard. If a passenger sits too close to the front airbag and it deploys, the passenger could be seriously injured or even killed. While maintaining control of the vehicle, sit as far away from the front airbag as possible.
16
4
Share

What material are the spark plugs in a Mercedes-Benz C-Class?

The original spark plugs used in the Mercedes-Benz C-Class are NGK iridium spark plugs from Japan, with a replacement interval of 60,000 to 80,000 kilometers. All four spark plugs need to be replaced at the same time during each replacement. Spark plugs are a crucial component of a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. However, over the past decade, most car engines have transitioned to direct connection between the ignition coil and the spark plug. The main types of spark plugs include: standard spark plugs, extended insulator spark plugs, electrode spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs. Damaged spark plugs can lead to the following issues: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption. It is important to replace spark plugs promptly when these symptoms occur.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.