Is the Geely Icon a hybrid?

How to Clear the Engine Yellow Warning Light by Yourself?

The method to clear the engine yellow warning light by yourself is: try starting and turning off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, reconnect it, and then attempt to start the vehicle. After performing the above steps, check if the engine warning light on the dashboard is still illuminated. It is important to note that when the engine warning light on the dashboard is illuminated, it generally cannot be manually cleared. You will need to visit a 4S shop to use a fault diagnostic tool for troubleshooting before it can be cleared. The self-clearing method for the engine yellow warning light is only applicable to false fault phenomena in the engine. If the method is ineffective, you should visit a specialized repair shop for inspection and clearing.

14

1

Share

Which button to press for car heating?

To turn on the car heating, press the AUTO button. The heating switch button typically features a thermometer-shaped icon or patterns with blue and red areas. The red zone represents heating, while the blue zone indicates cooling. By rotating the knob, you can increase the temperature in the red zone or decrease it in the blue zone. Methods to quickly raise the interior temperature: First, start the engine for preheating. Wait until the engine temperature gauge reaches the midpoint, then turn on the heating system. Set the air circulation to external mode to expel cold air from the cabin. After 2-3 minutes, switch the air circulation to internal mode. Precautions for using car heating: Avoid directing the warm air straight at your head, as prolonged exposure can cause driver fatigue and compromise driving safety. Do not sleep in the car with the heating on while the vehicle is stationary, as this can lead to high concentrations of carbon monoxide when the engine is off, potentially causing poisoning or suffocation if windows are closed. Refrain from smoking in the car when the heating is on, as smoke particles can adhere to the evaporator surface and foster mold growth in humid conditions, polluting the cabin air when the system is used again.

11

1

Share

How to Set Up Automatic Tilt-Down for Reversing Mirror?

Steps to set up automatic tilt-down for reversing mirror: 1. Power on the car by pressing the start button; 2. Set memory seats 1, 2, and 3, and select the seat position; 3. Choose the mirror to be set and press the mirror adjustment selection button; 4. Step on the brake, shift to R gear, and press the 4-way adjustment button to adjust to the desired position; 5. Press and hold the seat memory button for about 2 seconds; 6. Step on the brake, shift to P gear, and press the mirror adjustment selection button once more. Only models with memory function seats have this automatic tilt-down feature for reversing mirrors, and the setup method may vary depending on the car model. Automatic tilt-down for reversing mirror means that when the car is shifted into R gear, the right-side mirror automatically adjusts its angle downward to help the driver see the ground conditions.

4

1

Share

What is the method for starting an automatic transmission car?

The method for starting an automatic transmission car is as follows: 1. After the driver sits in the driver's seat, press the start button once. At this point, the ACC light will turn on. Then press it once more for the vehicle to perform a self-check. 2. Depress the brake pedal and press the start button again to ignite and start the engine. 3. Release the foot brake and allow the car to warm up in place. The duration can vary depending on the environment, specifically by observing the water temperature gauge on the dashboard. When the water temperature reaches and stabilizes at around 90 degrees, it indicates that the warm-up is complete. 4. Depress the brake pedal again, shift to D (Drive) gear, and release the handbrake. For an electronic handbrake, simply press the button briefly. Before starting, check the road conditions clearly through the rearview mirror to ensure it's safe to proceed. Also, sound the horn and turn on the turn signal to alert other vehicles and pedestrians. 5. Gradually release the foot brake to start moving. After starting, quickly merge into the road and drive at the prescribed speed. 6. Depending on road conditions, smoothly press the accelerator to increase speed and drive safely.

3

0

Share

How often should gear oil be changed?

There are two scenarios for changing gear oil: 1. If synthetic oil is used, it does not need to be changed within 200,000 kilometers; 2. If mineral oil is used, it should be changed every 40,000 to 60,000 kilometers. Gear oil mainly refers to the lubricating oil for transmissions and rear axles, primarily serving to lubricate gears and bearings, prevent wear and rust, and help dissipate heat from the gears. The hazards of not changing transmission oil for a long time include: 1. Abnormal wear and severe deterioration of the oil in the transmission; 2. Aging and degradation of the transmission oil, increasing fuel consumption and shortening the transmission's service life; 3. Granulation of the oil in the transmission, blocking oil passages, damaging the valve body, and affecting system oil pressure and power transmission; 4. Sluggish response and gear shift shocks in the transmission.

4

3

Share

What does 'stop' mean on a car?

The 'stop' light on a car is a mandatory stop warning light. When this light illuminates, the engine must be shut down immediately. The stop light is not an independent indicator - it's interconnected with warning lights for engine oil pressure, low brake fluid level, coolant temperature gauge, and electronic brake force distribution system malfunctions. The dashboard also features indicators for water temperature, oil pressure, air pressure, engine status, and cabin conditions. If any of these systems develop problems, the stop light will activate. For instance, when the engine coolant temperature becomes excessively high during operation (triggering the temperature warning light), the stop light will simultaneously illuminate to indicate engine malfunction. The dashboard additionally has a yellow warning light - while the stop light is red. Yellow signals general faults, whereas red indicates critical malfunctions.

14

1

Share

Is the Geely Icon a hybrid?

How to Clear the Engine Yellow Warning Light by Yourself?

Which button to press for car heating?

How to Set Up Automatic Tilt-Down for Reversing Mirror?

What is the method for starting an automatic transmission car?

How often should gear oil be changed?

What does 'stop' mean on a car?

What is the optimal tire pressure?

What is the fuel tank capacity of the Passat in liters?

Where in Fujian is the Min E license plate from?

What is the difference between CarPlay and CarLife?