···
Log in / Register

Is the Geely Icon a fuel or electric vehicle?

4 Answers
DeTeagan
09/08/25 3:50am

Geely Icon is a fuel-powered vehicle. Introduction to Geely Icon: The ICON is a mass-produced model by Geely Auto, positioned as a compact SUV. Geely Icon configurations: The Geely ICON is equipped with an L2+ level intelligent driving system. In terms of intelligent safety features, the Geely ICON comes with 540-degree all-terrain imaging technology, a new generation APA fully automatic parking system, ICC intelligent navigation system, ACC adaptive cruise control, AEB urban pre-collision system, LKA lane keeping assist system, 360-degree driving recorder, and BSD blind spot monitoring.

Was this review help?
6
5
Share
DeclanFitz
09/20/25 2:37am

I test drove the Geely Icon, which is primarily a fuel-powered SUV equipped with a 1.5T gasoline engine. The power is quite sufficient, and it drives smoothly both in the city and on highways. However, it also has a mild hybrid version, the MHEV system, which uses electric power to assist during startup, helping to save some fuel, though it’s not a pure electric vehicle. For fully electric models, Geely offers options like the Geometry C. The Icon’s fuel system is easy to maintain, with service shops widely available, so there’s no need to worry about finding a place for repairs. The average fuel consumption is around 7 liters per 100 kilometers, while the hybrid version reduces it to 6 liters, offering good fuel economy. The spacious interior makes it suitable for family trips or daily commutes. If you prefer a traditional driving experience, the Icon is a reliable choice, while the hybrid version adds a touch of tech appeal and is worth considering.

Was this review help?
13
2
Share
Expand All
VanJeffrey
11/03/25 3:00am

As a tech enthusiast, I'm particularly interested in the powertrain of the Geely Icon. It primarily features a fuel engine—a 1.5T with turbocharging that delivers strong explosive power. However, it also offers a mild hybrid version, the 48V MHEV, which uses a battery to assist the engine, improving fuel efficiency and reducing emissions by approximately 20%. This isn't a pure electric vehicle; Geely's electrification strategy involves separate brands, with the Geometry series being fully electric. The Icon's hybrid technology is more economical for city driving, as the electric assistance ensures smooth starts and comes with lower maintenance costs compared to full EVs. After driving it in the city for a few weeks, my average fuel consumption dropped to 5.8 liters. It offers great flexibility—just refuel and you're good to go. Overall, the Icon represents a smart transitional solution, combining traditional reliability with modern energy efficiency.

Was this review help?
15
3
Share
Expand All
McIsabela
12/17/25 3:01am

I've been driving for many years. The Geely Icon primarily features a fuel system, with a 1.5T gasoline engine that is stable, durable, quick to start, and wear-resistant. It offers a mild hybrid option to reduce fuel consumption, but it is not an electric type at all; Geely has separate pure electric models. The Icon's spacious design is generous, with enough room in the back seat for three children without feeling cramped, and the trunk is also ample. My family chose it because the fuel system is cheap to repair, and local shops can handle the parts, unlike electric cars that require time-consuming charging stations. Fuel consumption is controlled at 7 liters/100km, with the hybrid version being slightly better. It is economical for long-term use, suitable for families who prioritize practicality and safety or long-distance enthusiasts. Simple maintenance is all it needs, with no worries about battery issues.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Buick GL8 forum?

The fuel consumption of the Buick GL8 ranges between 8.4L-12.2L. As an MPV, the fuel efficiency of this vehicle is quite acceptable. Apart from the engine's own displacement, driving habits and road conditions also affect the car's fuel consumption. Here are some additional details: 1. In terms of power, this car is equipped with a 2.0T turbocharged engine, which has a maximum power of 191kw and a maximum torque of 350 Nm. Since this is an MPV model, the vehicle's own weight is relatively large, so the resulting fuel consumption is naturally higher. 2. There are many factors that affect a car's fuel consumption. The engine's displacement itself affects the fuel consumption, and later driving habits as well as road conditions also have a significant impact on fuel efficiency. 3. During the process of driving, if you frequently accelerate or decelerate sharply, the car's fuel consumption will increase by about 5-30%. This is a relatively normal phenomenon. If the car often travels on roads with poor conditions, the load on the engine will increase, requiring the engine to provide stronger power for the car, thus consuming more fuel.
13
5
Share

How to Solve Vehicle Pulling to One Side?

Solutions for car pulling to one side: 1. Check tire pressure: The most common cause of car pulling is uneven tire pressure. Visit a maintenance facility to measure and adjust the tire pressure, ensuring all tires have equal pressure. Besides tire pressure, uneven tread wear can also cause pulling, in which case tire rotation or replacement is needed. 2. Perform wheel alignment: This is the most common method to correct pulling. Compared to checking tire pressure, wheel alignment is more costly. Owners can first balance the tire pressure and observe the effect; if the car still pulls, then proceed with wheel alignment. 3. Inspect the suspension system: If wheel alignment doesn't work, consider whether the vehicle's suspension is the issue. A poorly designed suspension system can easily cause pulling. Additionally, damage, deformation, or misalignment of the suspension during use can also lead to pulling. 4. Check the steering system: Over time, the steering system may wear out, causing excessive gaps in connecting parts or loosening of bearings and other components, resulting in the car not following the correct trajectory and pulling to one side.
8
4
Share

Does parking a car near an outdoor air conditioning unit have any impact?

Parking a car near an outdoor air conditioning unit has minimal impact. However, it is not recommended to park there for extended periods as it may damage the car's paint. Below is detailed information about automotive paint: Overview: The primary function of automotive paint is to protect the car body from corrosion. Additionally, automotive paint enhances the vehicle's aesthetic appeal. Automotive paint is a type of coating. The purpose of a spray booth is to provide a clean, safe, and well-lit environment for automotive painting, ensuring that the painting process is free from dust interference and maintains high-quality results. Composition: Automotive paint mainly consists of resin, pigments, additives, fillers, hardeners, and solvents. Metallic automotive paint typically includes reflective metallic flakes (aluminum powder), while pearlescent paint usually contains mica particles.
15
4
Share

How to Determine the Direction of a Car's Air Conditioning Filter?

The installation direction of a car's air conditioning filter is indicated by a small arrow printed on the side of the filter. Simply install it according to the direction of the arrow, which represents the airflow direction of the air conditioning system. Some filters have the word 'UP' next to the arrow on the side, indicating that the side with the arrow should face upward. Here are the functions of the air conditioning filter: 1. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air. 2. It strongly and persistently absorbs moisture, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. 3. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 4. It effectively sterilizes and deodorizes, keeping the cabin air clean and free from bacterial growth, creating a healthy environment. 5. It effectively separates solid impurities such as dust, powder, and grinding particles from the air.
12
1
Share

What Causes High Temperature in a Loader Transmission?

The causes of high temperature in a loader transmission may include excessively high or low transmission oil level, damaged transmission pump, obstructed oil suction pipeline, or deteriorated hydraulic transmission oil. Below is a detailed introduction about automotive transmissions: Overview: A transmission is a device that alters the speed ratio and direction of motion, typically located between the clutch and the central drive. It can modify the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft according to different working conditions. Gear-driven transmissions generally consist of a housing and several gears. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were predominantly 4AT. AT transmissions achieve automatic gear shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT features two clutches.
15
3
Share

How many kilometers can a car spare tire be driven?

Spare tires are not related to mileage but to speed. Generally, spare tires should not exceed 60 km/h. Below are specific details about spare tires: 1. If it is a full-size spare tire, with the same rim and tire as the wheels, it can be used like a normal tire. 2. If it is a non-full-size spare tire, there are significant speed restrictions during driving—speed should not exceed 80 km/h, and sharp turns or strong impacts should be avoided. Below are extended guidelines for using spare tires: 1. Spare tires should not replace regular tires for long-term use. 2. The hanging position of the spare tire must be appropriate; improper hanging is unsafe. 3. Spare tires should be protected from oil corrosion. The main component of tires is rubber, which is highly susceptible to damage from various oil products. Avoid storing oil products with spare tires. If the tire is contaminated with oil, promptly wash off the oil stains with a neutral detergent. 4. Know the spare tire model. These numbers are crucial for driving safety, especially the load index and speed rating. Exceeding any of these specifications can pose safety hazards. 5. When replacing a spare tire, tighten the bolts diagonally to ensure even force distribution, preventing the tire from wobbling during driving.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.