Is the Geely Emgrand GS equipped with a three-cylinder engine?

2 Answers
MacAmir
09/04/25 3:42am
Geely Emgrand GS has both three-cylinder and four-cylinder engines. The models equipped with three-cylinder engines are the Emgrand GS 2020 1.5T DCT Dynamic 260T and the Emgrand GS 2020 1.5T DCT Dynamic Pro 260T. A three-cylinder engine consists of three cylinders, with three identical single cylinders arranged within the same engine block sharing a single crankshaft to output power. Its primary function is to convert chemical energy into mechanical energy. The Geely Emgrand GS is a compact SUV introduced by Geely Auto, with dimensions of 4440mm in length, 1833mm in width, and 1573mm in height, and a wheelbase of 2700mm. It is powered by two turbocharged engines: a 1.4T L4 and a 1.5T L3, with maximum power outputs of 104kw and 130kw respectively. It is paired with a CVT transmission (simulating 8 gears), a 6-speed manual transmission, or a 7-speed dual-clutch transmission.
Was this review help?
18
5
Share
McElias
09/16/25 4:49am
I've driven quite a few cars, and the Geely Emgrand GS definitely doesn't come with a three-cylinder engine configuration. It primarily uses a 1.4T four-cylinder engine. The four-cylinder engine is far superior in smoothness compared to three-cylinder ones—those easily noticeable vibrations, especially during cold starts or uphill driving, are absent in the Emgrand GS's four-cylinder setup. It runs much more steadily, with less noise and fewer vibrations, making it ideal for daily commutes. The power output is sufficient too; the 1.4T turbocharger delivers decent torque, and fuel consumption is kept around 6-7L/100km, which is quite economical. When choosing a car, pay attention to the specific year and model, but from the 2020 model year onwards, the mainstream configuration has been the four-cylinder design. Geely prioritized reliability and comfort—while the three-cylinder option saves space, it sacrifices driving experience. The Emgrand GS, as a family-oriented crossover SUV, focuses more on balance. During my test drive, the acceleration felt smooth, making it a trustworthy purchase.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Is it a violation to go straight in a turning lane?

Going straight in a turning lane is a violation. Below are specific details about turning lanes: 1. Intersections with left-turn signals but no U-turn signals: In the absence of no U-turn signs or dedicated U-turn signals, vehicles can make a U-turn as long as they do not interfere with normal traffic flow. The solid line of the central divider will change to a dashed line near the intersection, allowing vehicles to make a U-turn in this area. 2. No prohibition signs imply U-turn is allowed: When passing through an intersection, if there are no no left-turn or no U-turn signs, drivers do not need to pay attention to traffic light changes when making a U-turn. However, if there are signs indicating "U-turn allowed when left-turn signal is green" or "U-turn allowed when red light is on," drivers must observe the red light when making a U-turn.
11
2
Share

Is Wheel Balancing Necessary After Tire Rotation?

Tire rotation does not require wheel balancing. Below is an introduction regarding wheel balancing for car tires: 1. Main Reason: A car wheel is an assembly consisting of a tire and a rim. Due to manufacturing factors, the mass distribution of this assembly is not uniform, which can lead to dynamic imbalance when the wheel rotates at high speeds. Drivers may experience noticeable steering wheel vibrations. 2. Solution: The most effective method is to add counterweights to the wheel while it is in motion to correct the balance at various edge positions. 3. Other Causes: Shock absorber failure, frame deformation, excessive backlash between the drive and driven gears of the main reducer, etc. 4. Solution: Regularly perform wheel balancing checks.
17
4
Share

What to Do If You Can't Pass the Driver's License Test?

If you can't pass, you can only re-register and take the test again. Here is the relevant content introduction: 1. Psychological quality: Many people fail the test multiple times, mainly because their psychological quality is not up to standard. 2. Test opportunities: Each test subject has five opportunities, and each test has two chances, which is equivalent to ten opportunities for each subject. 3. Re-registration: If you fail all ten times, you can only re-register and take the test again. Here is the extended information of the relevant content introduction: 1. Initial driver's license test: For the first time taking the driver's license test in a different place, you can only apply for the driving license type below small vehicles. 2. Application: You cannot directly apply for A1, A2, A3, B1, and B2 driving licenses in a different place, but you can apply for an additional A1, A2, A3, B1, and B2 driving license in a different place.
11
4
Share

Which country is Toyota from?

Toyota is a Japanese automobile brand. Here are detailed introductions about Toyota: 1. Main brands: Toyota's automobile brands mainly include the core brand Toyota and the luxury brand Lexus. 2. Major subsidiaries: Toyota also has two major subsidiaries, Denso and Aisin, both of which are world-renowned automotive parts suppliers. Denso is the world's top automotive parts supplier, and Aisin's transmission systems are widely used worldwide. 3. Technical advantages: Toyota's technical advantages are reflected in the excellent off-road capability of its models, such as the Land Cruiser and Prado. Toyota not only possesses outstanding off-road capability under the harsh road conditions in the Middle East but also offers excellent durability and reliability.
20
2
Share

Is there a difference between 91V and 91W tires?

91V indicates a maximum speed capacity of 240 km/h, while 91W indicates a maximum speed capacity of 270 km/h. Here are the specific differences between the two: 1. Speed rating: V means the tire can withstand speeds up to 240 km/h, while W means the tire can withstand speeds up to 270 km/h. 2. Load index: 91 represents the tire's load index. A 91W tire can bear a load of 615 kg and withstand a maximum speed of 270 km/h. Tire speed ratings can be divided into different grades from A to Z, with grade A further subdivided into eight different levels from A1 to A8. The later the letter representing the tire speed rating, the better the tire performance.
3
2
Share

How Often Should Truck Wheel Hub Bearings Be Maintained?

If the vehicle frequently carries heavy loads over long distances, it is recommended that the owner perform maintenance every two months. For general trucks, maintenance every 20,000 to 30,000 kilometers is sufficient. Relevant information is as follows: 1. Ensure driving safety: Regular maintenance ensures the vehicle operates in optimal condition. 2. Reduce fuel consumption: The braking system, air conditioning system, and other components are significant factors affecting fuel consumption. 3. Extend the vehicle's lifespan: Proper maintenance ensures smoother operation, reduces engine wear, and thus extends the vehicle's service life. 4. Minimize component failures: Various parts of the vehicle require proper running-in.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.