Is the Geely Emgrand a Three-Cylinder Engine?

2 Answers
ClaraLee
07/28/25 10:48pm
Geely Emgrand is not a three-cylinder model, as its entire lineup features four-cylinder engines. Below is an introduction to the 2021 Geely Emgrand: 1. The Geely Emgrand is a compact car with body dimensions of 4632mm in length, 1789mm in width, 1470mm in height, a wheelbase of 2650mm, and a fuel tank capacity of 50 liters. 2. The 2021 Geely Emgrand is equipped with a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power of 80kW, and a maximum torque of 142Nm, paired with a 5-speed manual transmission.
Was this review help?
17
4
Share
StViolet
08/12/25 3:16am
As someone who has been following automotive trends for a long time, I have some understanding of the engine configurations of the Geely Emgrand. Indeed, some models in the Geely Emgrand series use three-cylinder engines, such as the 1.5-liter turbocharged version of the new Emgrand GL, which is designed with a three-cylinder structure, emphasizing fuel efficiency and environmental performance. It offers low fuel consumption and quick starts in urban driving. However, not all Emgrand models are like this. Older Emgrand sedans typically come with a 1.5-liter naturally aspirated four-cylinder engine, providing smoother driving and less vibration. When choosing, it depends on the year and model you're buying—checking the official configuration list is the most reliable. Nowadays, many brands are shifting to three-cylinder engines, and Geely is doing so to reduce emissions and costs. However, the actual experience varies from person to person. Some owners say the three-cylinder engine saves fuel but has slightly noticeable engine vibrations at low speeds, which you’ll need to test drive to feel for yourself.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How much slower is a 4.875 ratio compared to a 4.33 ratio?

4.875 ratio is 16km/h slower than 4.33 ratio. Here is additional information: Differences between 4.875 and 4.33 ratios: The main differences between 4.33 and 4.875 ratios are reflected in two aspects: different driven gear speeds and different numbers of gear teeth. For the same specification rear tire (driven gear) completing one full rotation, a vehicle with a 4.33 ratio will have its driven gear rotate 4.33 times. Whereas a vehicle with a 4.875 ratio will have its driven gear rotate 4.875 times. A vehicle with a 4.33 ratio has 32 teeth on the driven gear and 7 teeth on the driving gear. A vehicle with a 4.875 ratio has 39 teeth on the driven gear and 8 teeth on the driving gear. The 4.33 ratio balances power and rationality, making it suitable for flat regions and light-load express logistics scenarios; the 4.875 ratio emphasizes power performance, making it suitable for hilly and mountainous areas. Impact of ratio size on vehicles: When the transmission ratio is too small, the vehicle operates under heavy load with insufficiently smooth acceleration, leading to noise and vibration; when the transmission ratio is too large, fuel economy suffers, and engine noise becomes excessive at high speeds.
3
3
Share

Is 95 Octane Gasoline More Fuel-Efficient Than 92 Octane?

Using 95 octane gasoline is relatively more fuel-efficient and durable compared to 92 octane. The higher the fuel octane rating, the slower the combustion speed, the lower the combustion knock, and the higher the engine compression ratio required, with the ignition timing needing to be advanced. The opposite is also true. When the engine has a high compression ratio, high-octane gasoline should be used. If low-octane gasoline is used in a high-compression engine, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Simply follow the manufacturer's requirements for refueling. Differences between 92 octane and 95 octane gasoline: In terms of n-heptane content, 95 octane gasoline contains 5% n-heptane, while 92 octane gasoline contains 8%. In terms of isooctane content, 95 octane gasoline contains 95% isooctane, while 92 octane gasoline contains 92%. Regarding anti-knock properties, different gasoline octane ratings indicate different fuel anti-knock capabilities. The higher the octane rating, the better the anti-knock performance. 95 octane gasoline has better anti-knock performance than 92 octane gasoline.
20
0
Share

Does CVT Have Jerking Sensation?

"The charging fan of new energy vehicles will keep making noise. This is because charging the vehicle can easily cause the battery pack to overheat. When the internal sensors of the battery detect the temperature, they will send an alarm to the BMS (Battery Management System). The BMS will then send a signal to the fan, which will activate the fan control terminal to start the fan. Once overloaded, the noise from the vehicle's fan will become very loud. Reasons for noise during charging of new energy vehicles: This is because the components converting current and voltage generate heat, triggering the cooling fan of the electronic control system, which is a normal phenomenon. If the ambient temperature is relatively low and the heat dissipation is good, the fan may not start or operate at a low speed. If the temperature exceeds 40 degrees, the fan will start running. If the temperature exceeds 50 degrees, the fan will run at full speed, and the owner will hear a very noticeable noise. If the quality of the fan is poor, the noise during operation will also be louder. Long-term use of new energy vehicles can lead to dust accumulation in the charging system, which can also produce loud noises. During charging, new energy vehicles generate static electricity, which attracts dust from the environment to the charging system, impairing heat dissipation. As a result, the temperature rises immediately when the owner plugs in the charging gun, and the fan runs at maximum speed all the time. In this case, the dust can be cleaned, and the fan can be lubricated. If necessary, a better-quality fan can be replaced to reduce noise."
10
4
Share

What car does the ∧ symbol represent?

The ∧ symbol represents the Acura automobile brand. Development of the Acura brand: Acura is a premium automobile brand under Japan's Honda Motor Company, established in the United States in 1986. The name Acura is derived from the Latin word 'Accuracy,' and its logo features a caliper image used in engineering measurements. Models under the Acura brand: Acura's product line includes models such as the TL, RL, and MDX. The MDX is positioned as a large luxury SUV, the TL as a mid-size luxury sedan, and the RL as a full-size luxury sedan.
16
4
Share

What is the speed limit on highways?

"The speed limit on highways should be between 60 to 120 kilometers per hour according to relevant regulations. Introduction to speed limit regulations: Relevant regulations stipulate that highways should indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On highways, the maximum speed for small passenger cars should not exceed 120 kilometers per hour, other motor vehicles should not exceed 100 kilometers per hour, and motorcycles should not exceed 80 kilometers per hour. Precautions for driving on highways: On highways, do not change lanes randomly. Randomly changing lanes on highways can easily lead to tragedies. When driving on highways, drivers must obey traffic rules and drive correctly according to the vehicle type and lane. In addition, when changing lanes, always observe the road conditions, turn on the turn signal in advance, choose the correct lane, and only change lanes after ensuring safety. Moreover, do not change more than two lanes at once. Furthermore, always inspect the car before entering the highway. If you plan to drive on the highway, you need to inspect the car first, checking the overall condition of the car, including whether various fluids are sufficient, whether the brakes are reliable, whether all functions are operating normally, and whether the tire pressure is abnormal."
17
1
Share

Will Body Filler Paint Definitely Crack?

Body filler paint does not necessarily crack; it depends on the skill of the bodywork technician and the quality of the filler used. Here are the specific details: Remedies and Reasons for Cracking: Normally, there is no remedy for cracked automotive filler; the solution is to reapply the filler directly. For repairing car dents, not only is filler application necessary, but the painting process is also crucial. Under normal circumstances, filler and paint applied at a 4S shop will not crack, as the staff will bake the paint at 200 degrees Celsius after application to enhance adhesion. However, if you attempt to paint the car yourself, achieving this baking step is difficult, making cracking more likely. Function of Body Filler: Body filler, also known as body putty, is primarily used to fill deeper dents, restoring the body surface to smoothness. It also ensures that the primer adheres firmly to the body. When repairing car dents, the first step is to apply body filler, followed by the final painting. Filler can restore damaged substrates to their original shape, offering a quick and cost-effective repair method. However, it should be noted that applying filler does not cover all aspects of bodywork repair. Durability of Body Filler: Generally, automotive body filler can last about 3 years. If the filler is applied too thickly or is of poor quality, its lifespan may be shorter, potentially leading to peeling in less than 3 years.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.