Is the Geely Boyue Pro a four-wheel drive model?

What does Tripreset mean in Chinese?

Tripreset means short-distance trip meter reset in Chinese. In cars, Trip refers to the mileage seen from setting the trip meter, and reset means to reset. In cars, it indicates that the distance traveled by the user during a certain period can be cleared. Car mileage can be divided into two types: 1. Trip mileage: The trip mileage has many uses, such as measuring the distance between two places or determining maintenance intervals based on its value, for example, maintenance is required every 5000km; 2. Total mileage: Also known as Odometer, it displays the total kilometers the car has traveled from the factory to the present. The car's mileage can be used to infer the age or condition of a vehicle, making it an important indicator for used car evaluation.

13

5

Share

What is the violation code for an unclosed car door?

The violation code for an unclosed car door is 1075. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China," the penalty is as follows: points deducted: 0; fine amount: 20 yuan; other penalties: none. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The sequence from left to right is as follows: the first digit is the behavior classification code, the second digit is the points classification code, the third and fourth digits are the sequential code, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category in the Road Traffic Law; Second digit: Points classification code, indicating the category of points deducted for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035—"1" indicates a motor vehicle behavior, the second digit "3" indicates 3 points deducted, and "035" indicates the fifth item of the third violation in the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with "1" indicate motor vehicle traffic, e.g., 1003; Codes starting with "2" indicate non-motor vehicle traffic, e.g., 2002; Codes starting with "3" indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with "4" indicate highway traffic, e.g., 4002; Codes starting with "5" indicate other regulations, e.g., 5005; Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with "8" indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods for motor vehicle violation inquiries: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation inquiry section, enter the license plate number and engine number, and click to query; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of an unclosed car door, you can handle it through the Traffic Management 12123 app. After logging in, enter the violation processing business process, complete the processing, and make the payment.

19

2

Share

How to Check the Model Year of a Magotan?

To check the model year of a Magotan, you can refer to the vehicle's certification. The Magotan is a mid-size car produced by FAW-Volkswagen, with dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2871mm. The car is available in two powertrain options: a 1.4T turbocharged engine and a 2.0T turbocharged engine with high and low power outputs. The 1.4T engine delivers a maximum power of 110kW and a maximum torque of 250Nm. The low-power 2.0T engine produces a maximum power of 137kW and a maximum torque of 320Nm, while the high-power 2.0T engine offers a maximum power of 162kW and a maximum torque of 350Nm.

14

0

Share

How often should the transmission fluid of the Elantra be changed?

The transmission fluid of the Elantra should be changed every two years or 40,000 kilometers. The replacement method: 1. First, lift the car and place a large container underneath to catch the waste oil. Use an appropriate screwdriver to remove the inner and outer shells of the transmission. 2. When most of the oil has drained, remove the last oil pan. 3. Remove the transmission oil filter. 4. Take off the oil pan gasket and clean the surrounding stains. If the gaps are not clean enough, tools can be used. 5. Wipe all cleaned transmission oil filter components with cotton yarn and install them one by one. 6. Clean the surfaces of the replaced parts, install the cleaned oil pan and gasket together, clean the oil filter housing and wipe it clean, then install the cleaned housing, first fixing two diagonally opposite bolts before tightening all of them. 7. Add the original oil and check the oil level through the filling observation hole. If the oil is full, it will flow out from the observation hole.

12

0

Share

What are the reasons for the loud humming sound when accelerating?

The reasons for the loud humming sound when accelerating are: 1. The engine components are not fully lubricated by the oil; 2. If this phenomenon persists after some time, it may indicate severe wear of engine components, requiring internal engine cleaning to reduce wear gaps; 3. Large gaps and poor sealing can worsen the engine condition and may also lead to abnormal noises—it is recommended to have it checked at a repair shop; 4. It may be caused by excessive carbon buildup in the engine, which can be cleaned at a repair shop; 5. It could also be due to poor filtration, commonly caused by a dirty air filter—it can be cleaned or replaced at a repair shop; 6. The use of low-purity gasoline can also cause this phenomenon, as impure gasoline tends to form carbon deposits inside the engine.

13

0

Share

How to Adjust the Cadillac Equalizer for Optimal Sound Quality?

The method to adjust the Cadillac equalizer for optimal sound quality is to access the audio settings in the vehicle's central control system. Once selected, you can adjust the bass, midrange, and treble according to your personal preferences. Cadillac is a luxury automobile brand under General Motors, with its English name being Cadillac. The Cadillac XTS is a mid-to-large-sized sedan, measuring 5103mm in length, 1852mm in width, and 1502mm in height, with a wheelbase of 2837mm. This model features a family-style design, with a large front grille and chrome trim accents on the front face. The sides of the vehicle are also adorned with chrome trim.

5

1

Share

Is the Geely Boyue Pro a four-wheel drive model?

What does Tripreset mean in Chinese?

What is the violation code for an unclosed car door?

How to Check the Model Year of a Magotan?

How often should the transmission fluid of the Elantra be changed?

What are the reasons for the loud humming sound when accelerating?

How to Adjust the Cadillac Equalizer for Optimal Sound Quality?

What is the Depreciation Period for Street Sweepers?

What methods can be used when mice enter the engine compartment?

Is driving over dashed lines considered a traffic violation?

Where is the reversing light switch of the Lavida located?