Is the gasoline in Jiangsu ethanol-based?

What is the impact of coasting in D gear on the transmission?

The impact of coasting in D gear on the transmission is that it puts a load on the transmission, and prolonged use can cause the clutch to overheat or wear out. Reasons for the impact: When the vehicle is in D gear with the brakes applied, the transmission is under load. To cope with this load, the engine also increases its load, meaning it increases fuel injection and raises the RPM. Some engines and transmissions are not well-matched, or the engine's power may have decreased, leading to shaking. For dual-clutch transmissions, the clutch is in a semi-engaged state during this time, and prolonged use can cause the clutch to overheat or wear out. How the transmission works: The transmission primarily applies the principle of gear reduction through gear transmission. In simple terms, the transmission contains multiple sets of gear pairs with different gear ratios. The act of shifting gears while driving involves the operation of different gear pairs within the transmission. For example, at low speeds, gear pairs with larger gear ratios are engaged, while at high speeds, gear pairs with smaller gear ratios are engaged.

10

3

Share

Under what circumstances will you be photographed for using a phone while driving?

Using a handheld phone while driving is not allowed. Electronic surveillance cameras monitor such behavior, and violations will be photographed and recorded, resulting in fines and penalty points. The cameras can capture the driver's face when photographing phone use, so only the driver can handle the penalty with their own driver's license. According to the "Road Traffic Safety Violation Scoring Management Measures" implemented on April 1, 2022, drivers who make or answer handheld phone calls or engage in other behaviors that hinder safe driving will be penalized with 3 points deducted and a fine ranging from 20 to 200 yuan. 【The manifestations of driving behavior】include slow-moving traffic, intermittent driving, waiting at traffic lights, etc. 【Behaviors that hinder safe driving, such as making or answering handheld phone calls】include using a handheld device to make or receive calls, or holding a phone or other electronic device to send/receive text messages or WeChat messages, watch videos on apps like Douyin, Kuaishou, or Weibo, or play games. Even if the phone is mounted on a holder, performing actions like sending/receiving messages, watching videos, browsing apps, or playing games by viewing or operating the device is similarly dangerous as it diverts attention to the screen, and thus is also considered a violation. However, using hands-free car phones, phone headsets, or speakerphone functions that do not require holding the device and do not affect safety is not considered a violation of handheld phone use. Although using Bluetooth is not penalized, it is still discouraged as it can distract the driver and compromise road safety.

9

2

Share

Which light setting should be used for the new Camry during daytime driving?

The Camry's daytime running lights do not have a separate switch. As long as the car is started and begins to move, the daytime running lights will automatically turn on. Here is a detailed introduction to daytime running lights: Daytime running lights (DRLs) are designed to signal the presence of the vehicle to others during the day. They are installed on both sides of the front end. DRLs are not for illumination but serve as signal lights. Here is additional information about the Toyota Camry: Exterior: The Toyota Camry features dual styling designs: Luxury and Sport, both inspired by Toyota's latest "Keen-Look" design language. The hybrid version is based on the Luxury trim, with light blue front and rear lights highlighting its identity. Interior: The interior adopts an asymmetrical design, with a Y-shaped curve on the dashboard. Soft-touch surfaces and metal accents use premium materials, and the instrument panel and center console feature a first-of-its-kind three-dimensional surface finish. Features: The Toyota Camry is equipped with the latest Toyota Safety Sense (TSS), including Pre-Collision System (PCS), Lane Departure Alert (LDA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC), providing enhanced driving assistance for safety.

3

1

Share

What Causes the Chery Tiggo 5 Engine to Burn Oil?

There are two main reasons that cause an engine to burn oil. Normal Wear: This is a normal phenomenon after the vehicle has been driven for a certain mileage. Abnormal Wear: Causes of abnormal wear include early wear due to product quality issues or improper usage. Reasons for early engine wear include: Using substandard engine oil, failing to replace engine oil and oil filters on time. Starting the engine with a heavy throttle when cold, operating the engine without sufficient oil for extended periods, or running the engine at high temperatures for prolonged durations. Prolonged operation under high load and high RPM (engine speed exceeding 4,000 RPM per minute). Operating in environments with poor air quality (excessive dust levels) or failing to replace the air filter on time. Insufficient oil pump pressure, low oil pressure, clogged oil passages, etc., can all reduce engine lifespan and lead to early wear.

12

5

Share

Which one is the K1 clutch in Volkswagen's dual-clutch system?

In a dual-clutch system, with the central flywheel as the boundary, the right half is the normally closed (engaged) K1 clutch. Overall structure of the dual-clutch mechanism: Clutch K1 actuator, inner main shaft, outer main shaft, clutch K1 thrust bearing control rod, clutch K2 coaxial actuator, clutch K2 thrust bearing, clutch K1 thrust bearing, clutch K1 thrust bearing cover The structure of K1 is similar to that of a manual transmission clutch, except that the clutch operation is performed by a hydraulic actuator located at the far left end of the main shaft via a pull rod through the shaft center. Actuator working principle: Oil pressure from the valve group causes displacement of the piston, which slides on the guide tube with low friction due to the inserted Teflon pad. The piston's action is transmitted through a dedicated rod to the thrust bearing, thereby disengaging the clutch. When the valve group no longer commands oil pressure, the diaphragm spring pushes the thrust bearing, which in turn causes the piston to retract via the control rod, restoring engagement conditions. When the valve group remains in the neutral position, the trapped oil is incompressible, preventing piston movement and thus maintaining its position. A dedicated Hall effect sensor transmits the piston position to the TCU control unit to monitor whether the odd-gear clutch is disengaged.

8

3

Share

Difficulty in Shifting Gears in a New Automatic Transmission Car

Difficulty in shifting gears in an automatic transmission car could be caused by personal operation factors, clutch factors, transmission factors, etc. Operation factors: Incorrect operation by the driver, where the speed and gear do not match, can lead to difficulty in shifting gears. This can be resolved as the driver gains experience and becomes more proficient in operation. Clutch factors: Rust on the transmission's first shaft can prevent the clutch driven disc from moving normally, leading to poor return and making it difficult for the gear to engage properly. Clutch failure can result in insufficient clutch separation travel, causing incomplete clutch separation and difficulty in engaging gears. In such cases, it is necessary to adjust the separation travel at a repair shop. Excessive self-locking force in the clutch gear can make it difficult to shift in and out of gear, requiring adjustment of the clutch cable and gear stop lock at a repair shop. Deformation of the transmission plate in the clutch pressure plate assembly due to certain reasons can lead to poor separation, resulting in difficulty in shifting gears. In this case, it is necessary to replace the pressure plate with one that matches the original car's quality. Transmission factors: Old transmission oil needs to be replaced. If not replaced in time, it will reduce the lubrication effect, making it difficult to shift gears. In a new car, the transmission components may not have reached the optimal running-in state, leading to difficulty in shifting gears. This situation will improve after a period of running-in. In colder temperatures, the viscosity of the gear oil in the transmission may not reach the optimal state, reducing the lubrication effect and causing difficulty in shifting gears.

20

2

Share

Is the gasoline in Jiangsu ethanol-based?

What is the impact of coasting in D gear on the transmission?

Under what circumstances will you be photographed for using a phone while driving?

Which light setting should be used for the new Camry during daytime driving?

What Causes the Chery Tiggo 5 Engine to Burn Oil?

Which one is the K1 clutch in Volkswagen's dual-clutch system?

Difficulty in Shifting Gears in a New Automatic Transmission Car

What Causes Heavy Brakes and Failure to Start?

Must Fuel Additive Be Added to an Empty Tank?

Can Someone Else Substitute for Vehicle Inspection?

What are the causes of abnormal noise from the right rear shock absorber?