Is the GAC Wildlander a midsize or compact SUV?

What is the difference between with ABS and without ABS?

The difference between with ABS and without ABS lies in the condition of the wheels during braking: with ABS, the wheels do not lock up during emergency braking; without ABS, the wheels will lock up during emergency braking. The functions of ABS are: 1. To maximize the effectiveness of the brakes, reducing braking time and distance; 2. To prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. To maintain good steering control when turning during emergency braking. During braking, ABS quickly determines the locking state of each wheel based on speed signals from the wheel speed sensors. It closes the normally open input solenoid valve for the wheel that is beginning to lock, keeping the braking force constant. If the wheel continues to lock, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing the wheel from fully locking due to excessive braking force.

12

3

Share

How to Replace the Coolant in a Volkswagen Lavida?

The method for replacing the coolant in a Volkswagen Lavida: 1. Locate the coolant reservoir; 2. Follow the reservoir to find the hose underneath and identify the position of the hose clamp; 3. Use a clamp pliers to squeeze the clamp, apply force to open and lock it; 4. Pull the rubber hose forcefully to allow the coolant to drain out; 5. After the coolant has completely drained, you can either refill with new coolant or clean the system before refilling. The Lavida is an A-segment sedan produced by SAIC Volkswagen. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Lavida 2021 280TSI DSG Comfort Edition is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 110kw and a maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.

12

1

Share

What Causes the One-Button Start to Fail to Turn Off the Engine?

Reasons why the one-button start fails to turn off the engine: 1. The key is not detected. Sometimes, strong nearby magnetic fields can interfere with key detection. In such cases, aligning the key with the one-button start should resolve the issue. 2. Battery issues. If the battery is dead or its voltage is below 12V, pressing and holding the button can turn off the engine. 3. Generally, if the one-button start fails to turn off the engine, shifting to P gear and restarting before turning off again can solve the problem. If this doesn't work, it's best to contact a 4S shop for professional assistance. Below is some related information about the one-button start: The one-button start system is part of a smart car, a button device designed to simplify the starting process, which can also turn off the engine. This device can be retrofitted either at the original car key lock position or as an independent panel.

8

0

Share

What does ECO mean in new energy vehicles?

ECO refers to the economic driving mode of a vehicle. It is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode has been activated. The Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles employ the active Eco driving mode, which means they have a dedicated switch button. During daily driving, we can activate the Eco mode. However, it is unnecessary to enable the Eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco but also impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the Eco mode to deactivate automatically. During idle parking or in N/P gear and manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.

8

0

Share

Why is the windshield washer fluid not spraying out?

The reasons why the windshield washer fluid is not spraying out are: 1. The nozzle is clogged with dust; 2. The windshield washer fluid reservoir is empty; 3. The fuse is blown, and the motor is unresponsive and not working; 4. Frequent use of tap water or homemade unqualified washer fluid to clean the windshield, causing internal pipes to be clogged with scale. Automobile windshield washer fluid, commonly known as washer fluid, is a consumable item in car use. High-quality automobile windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The functions of washer fluid: 1. Cleaning performance: Washer fluid usually has wetting, penetrating, and solubilizing functions, thus playing a role in cleaning and removing dirt; 2. Anti-freeze performance: The presence of alcohol and ethylene glycol can significantly lower the freezing point of the liquid, thereby playing an anti-freeze role and quickly dissolving frost.

8

5

Share

How to Use a Car MP3 Player?

Car MP3 players can play music through a USB interface or by inserting an SD card. There are two common types of car MP3 players: 1. MP3 players that plug into the cigarette lighter. You need to connect the USB data cable to the MP3 transmitter and the computer's USB port. Once connected, use music downloading software like QQ Music or NetEase Cloud Music to download your favorite songs. It's important to note that the songs must be in MP3 or WMA format; otherwise, the downloaded music won't be recognized. After downloading, the songs will be stored in the car MP3 player. Then, plug the MP3 player into the car's cigarette lighter and turn it on. After turning it on, set the car's FM frequency to match the MP3 player's frequency. At this point, the songs in the MP3 player can be played in the car. 2. Built-in car MP3 players. First, find a USB drive, perform the same operation to download music onto the USB drive, and then plug it into the car's built-in USB port. Start the car MP3 player to complete the process.

19

4

Share

Is the GAC Wildlander a midsize or compact SUV?

What is the difference between with ABS and without ABS?

How to Replace the Coolant in a Volkswagen Lavida?

What Causes the One-Button Start to Fail to Turn Off the Engine?

What does ECO mean in new energy vehicles?

Why is the windshield washer fluid not spraying out?

How to Use a Car MP3 Player?

Where is the engine number located on the Great Wall Fengjun 5?

Should Brake Pads Be Replaced Simultaneously?

What are the differences between the Mercedes-Benz e100 and the Mercedes-Benz e200?

What to Do If You Failed the Driving Test (Subject Two) Twice? Should You Continue?