Is the GAC Trumpchi GS4 a domestic or joint venture car?

2 Answers
McGraham
09/01/25 5:37am
GAC Trumpchi GS4 is a domestic car. Additional information about the GAC Trumpchi GS4 is as follows: The GAC Trumpchi GS4 is positioned as an "International New Trend SUV" and was officially launched on April 18, 2015, with a total of 8 models released. On November 15, 2016, the 2017 Trumpchi GS4 was officially launched, featuring upgraded configurations, including the addition of a 6-speed automatic transmission for the 235T (1.5T) models and the introduction of four-wheel-drive versions. On June 16, 2017, the Trumpchi GS4 PHEV model was officially launched, equipped with a plug-in hybrid system consisting of a 1.5L Atkinson cycle engine and a G-MC electric coupling system. The Trumpchi GS4 made its global debut at the North American International Auto Show in January 2015.
Was this review help?
9
2
Share
MacReagan
09/13/25 8:19am
I've researched the history of GAC Group, and the Trumpchi GS4 is definitely a domestic car. As a state-owned Chinese automaker, GAC launched the Trumpchi brand independently without direct foreign capital or technical partners. All design, R&D, and production are carried out locally in China. Unlike joint venture brands such as GAC Honda or GAC Toyota which involve foreign companies, Trumpchi relies entirely on domestic technological accumulation and innovation. In recent years, Chinese cars have made rapid progress, and the GS4 is a great example—offering high cost performance, strong reliability, and stable driving performance. If you're concerned about quality, I've test-driven several Trumpchi models and found their quality comparable to some joint venture brands, even with more advanced features. Overall, choosing the GS4 means supporting domestic brands, which is something to be proud of.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

What is the hazard warning light?

Hazard warning light, emergency flasher, and warning light refer to the same type of light. Here is some related knowledge about hazard warning lights: 1. Definition: The hazard warning light, commonly known as the emergency flasher or warning light, refers to both turn signals flashing simultaneously. There is a red triangle-shaped button on the vehicle's dashboard; pressing it activates the hazard lights. In some compact cars, the hazard light switch is located near the steering column at the front, featuring a small red lever - lifting this lever turns on the hazard lights. 2. Usage scenarios: Hazard lights are typically used in the following situations: when pulling over due to a malfunction, activating them alerts following vehicles. They can be turned on when the vehicle is being towed. If a car breaks down on the highway, turning on the hazard lights warns approaching vehicles to slow down and proceed with caution. They can also help a convoy of vehicles become more noticeable to others while making it easier for vehicles in the same group to identify each other.
3
0
Share

How Early Can You Obtain the Vehicle Annual Inspection Sticker?

According to Article 40 of Order No. 102 issued by the Ministry of Public Security of the People's Republic of China, vehicle owners can apply for the inspection compliance sticker at the local vehicle management office up to three months before the expiration of the current inspection validity period. Here are some details about the annual inspection sticker: 1. Eligibility: Private cars within the first 6 years are eligible for the exemption-from-inspection policy, requiring only a biennial sticker renewal; private cars older than 6 years must pass an annual inspection at a vehicle inspection center before obtaining the sticker. 2. Inspection Frequency: For passenger transport vehicles, within the first 5 years, an annual inspection is required; if older than 5 years, inspections must be conducted every 6 months. For trucks and large or medium-sized non-passenger transport vehicles, within the first 10 years, an annual inspection is required; if older than 10 years, inspections must be conducted every 6 months.
11
3
Share

Where are the car's rearview mirrors located?

The car's rearview mirrors are located on both sides of the vehicle body. Here is some related knowledge sharing about car rearview mirrors: 1. Function: When the driver sits in the cockpit, the visible field of view is about 260 degrees, with the remaining approximately 100 degrees being blind spots. However, car rearview mirrors are not only meant to reduce blind spots; when properly adjusted to the optimal position, they can facilitate and enhance driving. 2. Adjustment: Adjust the vertical angle so that the rearview mirror shows an equal split between sky and ground. Then adjust the horizontal angle so that the vehicle body occupies about 1/4 of the mirror's surface.
6
0
Share

How to Distinguish Between Genuine Parts and Aftermarket Parts?

Here are the differences between aftermarket parts and genuine parts: 1. Genuine Parts: Genuine parts refer to automotive components produced by manufacturers directly authorized by the automobile manufacturer. Both the products and their packaging uniformly feature the automobile manufacturer's trademark logo, and the packaging includes product specifications and the manufacturer's contact details. It's important to note that genuine parts are only circulated within the automobile manufacturer's own sales system, such as the manufacturer's brand 4S stores or directly authorized dealers. 2. Aftermarket Parts: Aftermarket parts refer to automotive components produced by manufacturers not authorized by the automobile manufacturer. Both the products and their packaging uniformly feature the automobile manufacturer's trademark logo, and the packaging includes product specifications and the manufacturer's contact details. It's important to note that genuine parts are only circulated within the automobile manufacturer's own sales system, such as the manufacturer's brand 4S stores or directly authorized dealers.
8
5
Share

How are cars created?

The manufacturing process of automobiles is mainly divided into: stamping, welding, painting, assembly, and inspection. The following is the manufacturing process: 1. Stamping: Stamping is the first step in automobile manufacturing, where metal sheets are processed into parts of specific shapes using specialized molds. 2. Welding: The main welding assemblies include: the engine compartment assembly, floor assembly, side panel assembly, front and rear door assemblies, tailgate assembly, and hood assembly. 3. Painting: The white body from the welding workshop enters the painting workshop, where it undergoes three main processes: electrocoating, mid-coating, and top-coating. 4. Assembly: Various components such as wiring harnesses, doors, airbags, ECUs, dashboards, engines, front and rear axles, tires, and other interior, exterior, and electronic parts are installed. Fluids such as fuel, lubricating oil, cleaning agents, coolant, brake fluid, and antifreeze are also filled during this process. 5. Inspection: The main inspection items include: four-wheel alignment inspection, headlight inspection, braking performance inspection, emission inspection, shower inspection, and road inspection.
8
2
Share

Can I Transfer My Driver's License Application to Another City Before Completing the Test?

It is possible to transfer your driver's license application to another city before completing the test. Below is a detailed introduction regarding the transfer process when the driver's license test is not yet completed: 1. Transfer Process: The vehicle management office in the destination city will review the applicant's identity documents, verify the number of test attempts and test scores, prepare an application form for the applicant to sign and confirm, and reissue a learning driving permit. Additionally, the internet user transfer will be processed simultaneously. 2. During Driving School Training: If the applicant has already scheduled a test for Subject 2 or Subject 3 at the original vehicle management office, the destination vehicle management office will directly collect the information of the driving school from the original location. If the applicant has not completed the training and continues to enroll in the destination city, the information of the driving school in the destination city will also be collected. 3. Not During Driving School Training: If the applicant has not scheduled a test for Subject 2 or Subject 3 at the original vehicle management office, the destination vehicle management office will enter the information of the driving school in the destination city.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.