Is the fuel tank of a Porsche on the right or left side?

Can full synthetic engine oil last for one year?

The recommended replacement interval for full synthetic engine oil is approximately one year or 10,000 kilometers. Relevant information is as follows: 1. Long lifespan: Currently, common full synthetic oils on the market are made from Group III base oils through hydrogenation. Full synthetic oil is superior to conventional mineral oil and semi-synthetic oil, offering better stability, oxidation resistance, and corrosion resistance, which naturally results in a longer service life. Generally, it should be replaced once a year or after driving about 10,000 kilometers. Therefore, if your car uses full synthetic oil, using it for a year is generally not a problem. 2. Superior performance: Due to the superior performance of full synthetic oil, it is suitable for high-end vehicles or those requiring higher performance. For economical family cars with regular oil maintenance, semi-synthetic oil may be more appropriate. Full synthetic oil is not suitable for all vehicles. Older vehicles with long service times are recommended to use semi-synthetic oil because these older cars have relatively poorer sealing. Full synthetic oil, with its low viscosity and good fluidity, may be more prone to leakage, making higher viscosity semi-synthetic oil a more suitable choice.

1

5

Share

Why Do Motorcycles Easily Stall in the Rain?

Common reasons why motorcycles easily stall in the rain include: water ingress causing short circuits in the ignition switch or right-hand kill switch, poor waterproofing of the ignition system's high-voltage cap leading to water ingress, or the overflow tube at the bottom of the carburetor being too long, causing water droplets to be sucked into the carburetor due to negative pressure, resulting in stalling. Precautions for riding a motorcycle in the rain are as follows: 1. Wear a helmet correctly: Always wear a helmet when riding in the rain, but avoid covering the helmet with a raincoat as it can obstruct vision and hinder head movement, making riding difficult. Riders who wear glasses should opt for a helmet with a windshield to prevent rain from wetting their eyes and blurring vision. If water accumulates on the helmet's windshield, simply wipe it off with your hand. 2. Navigating through waterlogged roads: Some roads may have large puddles due to poor drainage or low-lying areas. When encountering such conditions, first assess the water depth, which should be below the height of the spark plug and exhaust pipe to ensure the vehicle doesn't stall while passing through. If the motorcycle stalls and cannot be restarted, push it to a safe area and dry the spark plug and high-voltage cap.

3

1

Share

What materials are needed for a temporary license plate?

Materials required for a temporary license plate are as follows: original and photocopy of the vehicle certificate; original and photocopy of the third copy of compulsory traffic insurance; original and photocopy of the first copy of the car purchase invoice; original and photocopy of the owner's identity proof; non-local owners need the original and photocopy of the owner's temporary residence permit. Situations where a temporary license plate can be applied for are as follows: 1. When purchasing a car: When driving the vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the local vehicle management office where the car was purchased. 2. Vehicle transfer: When the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location. 3. Not applying for an official license plate: For a new car that has not applied for an official license plate in the local area and needs to be driven to another location for modification, a temporary license plate must be applied for locally. After modification is completed, a temporary license plate must be applied for at the local vehicle management office to drive back to the original area.

12

1

Share

What does high-pressure common rail in diesel engines mean?

High-pressure common rail technology refers to a fuel supply method in a closed-loop system composed of a high-pressure fuel pump, pressure sensor, and ECU, where the generation of injection pressure and the injection process are completely separated. The high-pressure fuel pump delivers high-pressure fuel to a common fuel rail, and precise control is achieved over the fuel pressure within the common rail. Advantages: 1. Flexible adjustment of injection pressure in the high-pressure common rail system: The optimal injection pressure required for different operating conditions can be determined, thereby optimizing the overall performance of the diesel engine. 2. Independent and flexible control of injection timing: Combined with high injection pressure (120MPa to 200MPa), it can simultaneously control NOx and particulate matter (PM) at lower levels to meet emission requirements. 3. Flexible control of injection rate changes: Achieves ideal injection patterns, easily enabling pre-injection and multiple injections, which can reduce NOx emissions while ensuring excellent power and fuel economy. 4. Electromagnetic valve-controlled injectors: High control precision prevents air bubbles and residual pressure in the high-pressure fuel lines, ensuring minimal variation in cyclic fuel injection across the engine's operating range, improving fuel supply uniformity among cylinders, thereby reducing engine vibration and lowering emissions.

18

1

Share

What Are the Causes of Steering Wheel Noise When Turning in Winter?

The main causes of noise when turning the steering wheel include insufficient lubrication of the steering column, excessive friction, lack of power steering fluid; universal joint failure; aging of the suspension stabilizer bar bushings; and failure of the thrust bearing. If the steering column has excessive friction, power steering fluid should be added promptly. The steering column is a type of steering column locking device, primarily composed of a lock rod, camshaft, lock stopper, unlock lever, and unlock button. If the universal joint fails, it can alter the vertical bouncing angle and should be replaced immediately; otherwise, it may prevent the car from operating normally. Its function is to accommodate power transmission, steering, and the angle changes caused by vertical bouncing during vehicle operation. Aged suspension stabilizer bar bushings should be replaced promptly, and regular inspections of these components should be conducted to prevent failures. Thrust bearing failure can cause the vehicle to pull to one side, so pressurization or depressurization treatment is required, which should be performed at a repair shop. The automotive thrust bearing, also known as the pressure bearing, withstands vertical pressure and allows free rotation.

17

1

Share

Is the Wlander's Transmission Belt-Driven?

The Wlander's transmission is belt-driven. The Wlander is equipped with a 10-speed continuously variable transmission (CVT), which can simulate 10 gears. It incorporates a set of starting gears, utilizing gear drive when in low gears (1st and 2nd), while employing belt drive for gears 3 to 10, ensuring smoother power delivery. Transmission Maintenance Methods: Regular Transmission Inspection: It is essential to regularly check the transmission fluid level to ensure it remains within the specified range. Top up the fluid as needed based on actual working conditions, ensuring the new fluid is of the same type. When changing the fluid, drain the old fluid while the transmission is operating and clean the system thoroughly. Regularly inspect the working condition of the transmission gears to ensure optimal meshing between gears, clean them periodically, and maintain proper alignment between gears and shafts. Inspect Connection Points: During routine maintenance, examine the condition of various connection points in the transmission to promptly identify issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts as necessary. Regularly check for oil leaks at the shaft-end seals and external joints, replacing failed seals and gaskets promptly.

20

3

Share

Is the fuel tank of a Porsche on the right or left side?

Can full synthetic engine oil last for one year?

Why Do Motorcycles Easily Stall in the Rain?

What materials are needed for a temporary license plate?

What does high-pressure common rail in diesel engines mean?

What Are the Causes of Steering Wheel Noise When Turning in Winter?

Is the Wlander's Transmission Belt-Driven?

Can a B2 driver's license be used until the age of 65?

Should You Use Cold or Warm Air to Defog Your Car?

How to Fix the Issue When the Infotainment System Won't Start and Only Shows the Car Logo?

What brand is yeada tire?