Is the fuel consumption of Wuling Zhiguang 1.2 high?

1 Answers
Hylla
07/30/25 8:51am
The fuel consumption of Wuling Zhiguang 1.2 is not particularly high. According to the data from the Ministry of Industry and Information Technology, its fuel consumption is 6.0L/100km, while statistics from owner reports show an average fuel consumption of around 7.5L per 100km. This fuel consumption performance is not considered high for a cargo vehicle. In terms of vehicle parameters, the Wuling Zhiguang 1.2L has a body length, width, and height of 3797/1510/1820mm respectively, with a wheelbase of 2500mm and a curb weight of 997kg. Due to its short front end and high roof, it appears larger than its actual dimensions. The model is equipped with 13-inch steel wheels, front disc and rear drum brakes, and Tianfu RD-103D series tires with specifications of 165/70R13. In terms of power, the 2020 Wuling Zhiguang Utility model is equipped with a 1.2L naturally aspirated engine (model LSI) with a maximum power of 56kW/76Ps and a maximum torque of 108Nm, meeting the National VI emission standards. It is paired with a 5-speed manual transmission. The suspension structure consists of front MacPherson struts and rear longitudinal leaf springs, which are more inclined towards daily load-bearing.
Was this review help?
8
2
Share
More Forum Discussions

Will a New Energy Vehicle Lose Battery Power After Being Parked for a Month?

New energy vehicles will lose battery power after being parked for a month. Here is more information about new energy vehicles: Introduction: New energy vehicles refer to those that use unconventional vehicle fuels to provide power. They can be divided into four main categories: pure electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, and other new energy electric vehicles. The main advantage they offer is zero tailpipe emissions. New energy vehicle license plates: Small new energy vehicles have gradient green license plates, while large new energy vehicles have yellow-green dual-color license plates. Compared to traditional vehicle license plates, new energy vehicle license plates have one additional digit, which helps effectively distinguish them and avoid duplication.
12
1
Share

How many kilowatt-hours of electricity are needed for 500 kilometers in a new energy vehicle?

Approximately 80 kilowatt-hours of electricity are needed for 500 kilometers in a new energy vehicle. Here is more information about new energy vehicles: Introduction: New energy vehicles refer to those that use unconventional vehicle fuels to provide power. New energy vehicles can be divided into four main categories: pure electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, and other new energy electric vehicles. The advantage of new energy vehicles is zero tailpipe emissions. New energy vehicle license plates: Small new energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-color. Compared to traditional vehicle license plates, new energy vehicle license plates have one more digit, which effectively distinguishes them and avoids duplication.
4
5
Share

Do You Need to Press the Clutch When Braking at a Red Light with a Manual Transmission?

When waiting at a red light with a manual transmission car, you do not need to press the clutch. Here is some relevant information about the clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. The principle of releasing the clutch: The principle of releasing the clutch is 'slow at first, fast in the middle, and coordinated at the end.' When initially pressing the clutch, do it quickly and press it all the way down in one go. When lifting the clutch, move quickly during the free travel, slow down as it nears contact, pause slightly at the semi-engagement point, and then release it completely. The key to this process is finding the semi-engagement point accurately. To control the vehicle speed effectively, use the semi-engagement point as the dividing line—lift quickly above it and slow down below it, adjusting downward to choose a speed that suits you.
7
0
Share

Do You Need to Press the Brake When Shifting to S Mode?

Shifting to S mode does not require pressing the brake. While the car is in motion, simply push the gear lever into the S position. The Function of S Mode: S mode, as a sport mode for vehicles, makes the car more aggressive and powerful. When you need to maximize the vehicle's performance, S mode can bring out its full potential to achieve the desired state. When to Use S Mode: When urgently needing to overtake and feeling that the desired speed is not being reached, you can directly shift into S mode without pressing the brake. The engine speed will increase, and the vehicle speed will noticeably improve. After overtaking, shift back to D mode directly, also without pressing the brake. If during overtaking, the D mode already provides sufficient speed, simply pressing the accelerator further can complete the maneuver. Using S mode is not recommended in this case, as shifting back to S mode at excessively high speeds can easily damage the gears.
11
2
Share

Where to Renew Driver's License in Baoshan District?

Baoshan District Driver's License Renewal Baoshan District Traffic Police Brigade Driver Management Office: West Annex Building, No. 331 Meipu Road License renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other permitted vehicle type licenses must have less than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses with demerit points in a scoring cycle, and holders of other permitted vehicle type licenses involved in traffic accidents resulting in death with equal or greater responsibility without license revocation, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; the applicant's physical condition must meet the driving license requirements; The motor vehicle driver's license must not be legally seized, detained, temporarily suspended, revoked, canceled, or rescinded. Renewal process: The motor vehicle driver must bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Renewal materials: Bring two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office).
8
1
Share

How High Can Water Rise Before a Car Cannot Start?

If the water level does not exceed half of the tire height, it is generally safe to drive. Below is relevant information about water entering a car: Hazards: If water enters the car, many electronic components may be submerged, leading to short circuits and damage. If water enters the engine through the air intake, it can cause severe engine damage. The consequences of engine water ingress are serious, ranging from major engine repairs to complete engine failure. Precautions: During heavy rain, it is advisable to avoid driving and park the car in a higher area to prevent water submersion. If water rises above the door level and enters the car, the vehicle is considered flooded. If the car is found to be flooded, check if it can still start. If the car can run without any issues, the priority is to remove the accumulated water inside the vehicle.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.