Is the fuel consumption of the Geely Binrui 1.4T Asian Games Edition high?

1 Answers
JuneMarie
07/30/25 6:43am
The fuel consumption of the Geely Binrui 1.4T Asian Games Edition is around 7.4L/100KM. Factors affecting fuel consumption: The driving habits of the driver, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, will all affect the vehicle's fuel consumption. Methods to reduce fuel consumption: Avoid sudden acceleration and sudden deceleration while driving; make more use of the car's inertia and reduce unnecessary braking; use cruise control correctly; use the air conditioning cooling system reasonably; reduce the vehicle's weight, promptly remove unnecessary items from the car and mud from the chassis to lighten the load.
Was this review help?
11
4
Share
More Forum Discussions

What does the EPC light on in a Volkswagen Golf indicate?

Volkswagen Golf's EPC light coming on is mainly caused by a dirty throttle body. In this case, simply cleaning the throttle and then performing a reset can resolve the issue. Another reason could be a leak in the intake system, which triggers the engine control unit to detect the problem and illuminate the EPC warning light. Below is an extended introduction to this issue: 1. Introduction to EPC: EPC stands for Electronic Power Control (full name: Engine Electronic Stability System), and many people also refer to it as the electronic throttle. The EPC indicator light is quite common in Volkswagen vehicles. After turning the ignition key, the vehicle begins a self-check, during which the EPC light will illuminate for a few seconds and then turn off. If the light remains on after the vehicle starts, it indicates a fault in the vehicle's mechanical or electronic systems. 2. Other reasons for the EPC light to come on: A leak in the crankcase ventilation system can also cause this fault. Severe or obvious vacuum leaks are not the issue; rather, it's the minor leaks that the control unit cannot effectively detect. When the compensation adjustments made by the control unit exceed the limits allowed by its internal program, the control unit will determine that there is a problem with the electronic throttle system, and the EPC fault light will illuminate. However, the actual reason for the EPC light coming on in this process is not due to a functional issue with the electronic throttle control system itself. A faulty brake light switch can also lead to this phenomenon.
13
0
Share

Is the Purchase Tax the Same for the First and Second Car?

First car and second car purchase tax are the same. Here are the specific details about automobile taxes: 1. Automobile taxes include: purchase tax, vehicle and vessel usage tax, comprehensive tax paid when purchasing imported vehicles, etc. 2. Calculation rule: Vehicle purchase tax payable = taxable price × 10%. 3. Vehicle and vessel tax: Collected annually per vehicle. Divided into 7 tiers based on vehicle displacement. 4. Vehicle purchase tax: A tax levied on individuals and units purchasing specified vehicles within China. It evolved from the vehicle purchase surcharge.
14
1
Share

What can be done when the car's rearview mirror is unclear in the rain?

Here are specific solutions for unclear rearview mirrors during rain: 1. Soapy water: Soap breaks the surface tension of water, preventing water droplets from forming. 2. Install rain deflectors: Cars equipped with rain deflectors don't need to worry about obscured rearview mirrors due to raindrops. 3. Apply waterproof film: This method works similarly to soapy water but offers long-lasting protection. Waterproof films are durable, cost-effective, and a worthwhile choice for many car owners.
1
2
Share

Are the vehicle manufacturing date and the factory release date the same?

Vehicle manufacturing date and factory release date are not the same. The following is additional information: Methods to check a car's production date: Check the nameplate in the engine compartment; Look at the small nameplate around the door seam; Check the VIN number under the windshield; Refer to the car's manual. The significance of a car's production date: It is used for depreciation valuation when purchasing car damage insurance; When buying a new car, it helps determine if the vehicle is from inventory; In case of safety-related quality issues requiring manufacturer recalls, the production date is used to identify affected vehicles; The production date determines the car's model year, which affects its configuration and the part numbers of installed components.
16
1
Share

What is the fuel consumption of the Tang DMI?

The comprehensive fuel consumption of the Tang DM is 9L/100km. The above is the NEDC comprehensive fuel consumption, which is the data of comprehensive working condition fuel consumption measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.1-6.6L/100km. The level of car fuel consumption is directly related to five major factors, namely driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that will increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement consume more fuel than those with smaller displacement, because larger displacement generally means greater power, requiring more gasoline to burn and do work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires larger driving torque. Road conditions: Dirt roads, muddy roads, soft roads, mountain roads, etc. Driving on these roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easy to atomize, requiring more gasoline to be injected for combustion, increasing fuel consumption. At the same time, when the temperature is low, the engine computer will control the use of higher RPM to warm up the car, which will also increase fuel consumption.
18
1
Share

What Causes Windshield Wipers to Malfunction After Waxing?

Here are the specific reasons why windshield wipers may malfunction after waxing the front windshield: 1. Damaged Wiper Blades: Damaged wiper blades can result in poor cleaning performance. Drivers should avoid the bad habit of dry wiping and should spray water first before activating the wipers to protect the blades. 2. Misaligned Wiper Blades: If the wipers make unusual noises, it may be due to misalignment. Drivers should visit a 4S shop to have the wiper angle adjusted. 3. Wiper Maintenance: If the vehicle is parked for an extended period, drivers can place foam strips or wooden sticks under the wipers to separate the blades from the windshield, which helps extend the wipers' lifespan.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.