Is the Ford Raptor subject to mandatory scrapping after 15 years?

1 Answers
DiCharles
07/29/25 1:33pm
The Ford Raptor is subject to mandatory scrapping after 15 years. The Ford Raptor is a classic pickup truck model under Ford Motor Company, and in China, it is classified as a truck. Therefore, the Ford Raptor falls under the scrapping policy for trucks, which mandates scrapping after 15 years of use. Mandatory scrapping is different from recommended scrapping. Recommended scrapping suggests scrapping, but if the vehicle still meets the requirements for continued use, it may not be scrapped. However, mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: Reaching the stipulated service life; After repair and adjustment, still failing to meet the national standards for motor vehicle safety technology concerning in-use vehicles; After repair and adjustment or the adoption of control technology, still failing to meet the national standards concerning pollutant emissions or noise for in-use vehicles; Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
Was this review help?
11
0
Share
More Forum Discussions

How to Set Up One-Touch Power Windows?

The method to set up one-touch power windows is as follows: 1. Start the car; 2. Locate the one-touch window button on the armrest; 3. Press and hold the button down for 5 seconds; 4. Pull the button up for 5 seconds; 5. The one-touch window function is now set up. The functions of car windows include: 1. Providing shelter from wind and rain, and reducing noise; 2. Minimizing wind resistance and improving airflow; 3. Protecting the safety of passengers. Methods for maintaining car windows: 1. Use appropriate windshield washer fluid according to the season; 2. Apply automotive window insulation film. Methods for cleaning car windows: 1. Pour water from the top of the vehicle and wipe off the dirty water with a sponge; 2. Evenly spray glass cleaner solution onto the window using a high-pressure spray bottle; 3. Carefully dry the window with a soft cloth.
17
2
Share

What is the purpose of the intake camshaft solenoid valve?

The purpose of the intake camshaft solenoid valve is: to act as a switch, utilizing the electromagnetic force generated by electric current flowing through a coil to attract the valve core, which is divided into normally open and normally closed types. Issues that may occur when the intake camshaft solenoid valve is damaged include: 1. Poor lubrication effect; 2. Insufficient oil supply pressure from the oil pump; 3. Blockage of the lubrication oil passage, preventing lubricating oil from reaching the camshaft; 4. Lubricating oil cannot enter the camshaft clearance, leading to abnormal wear of the camshaft. The working principle of the intake camshaft solenoid valve is: during braking, the valve closes the engine exhaust pipe, forcing the engine crankshaft to perform rotational motion. During the compression and exhaust strokes, air is compressed in the cylinder, increasing the piston exhaust resistance, thereby achieving the purpose of reducing vehicle speed through the transmission system.
11
2
Share

Which countries have the steering wheel on the right?

Countries with the steering wheel on the right include Japan, Thailand, India, Indonesia, Pakistan, Ireland, the UK, etc. The method to remove the steering wheel: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the screwdriver head between the retaining spring and the airbag hook, the airbag will automatically pop slightly toward the seat; 5. Turn the steering wheel 180 degrees and continue to release the retaining spring; 6. Remove the airbag, unclip the yellow safety latch behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector inside the upper part of the steering wheel, use an M12 spline to loosen the central fixing bolt counterclockwise; 8. Remove the steering wheel.
18
1
Share

What are the methods for beginners to avoid mistaking the accelerator for the brake?

Beginners can avoid mistaking the accelerator for the brake by: 1. Developing the habit of stepping on the brake with the right foot when not accelerating; 2. Keeping the foot on the brake when not pressing the accelerator. The working principle of the accelerator is: When the accelerator pedal is pressed, it directly controls the throttle valve, causing the throttle opening to increase, which allows more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, increasing the engine speed and accelerating the vehicle. The brake system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. Methods for brake maintenance include: 1. High-temperature protection; 2. Cleaning oil stains, dirt, and friction dust from the brake discs, brake drums, and any related parts to ensure good heat dissipation of the brake discs; 3. Regularly replacing brake fluid; 4. Regularly checking the thickness of brake pads or brake shoes.
20
1
Share

How to Replace the Battery in a Ford Remote Key?

Ford key battery replacement method: 1. Locate a small switch on the back of the car key, pull it to release, then grasp the metal part and pull it upwards to remove the mechanical key. 2. After removing the mechanical key, you will see a small groove in the middle of the key. Use the head of the mechanical key to pry open the key cover. 3. Once the key cover is opened, you can see the battery inside. Remove and replace the battery. Precautions are as follows: 1. Improper battery replacement may damage the car key. 2. Using unsuitable or non-compliant batteries may damage the car key. The battery's rated voltage, size, and specifications should be the same. 3. Following the steps correctly for battery replacement usually poses no issues. If problems arise during the process that cannot be resolved, it is recommended to call a 4S store for assistance. 4. If the unlock button is frequently pressed outside the operational range, the car may no longer be unlocked or locked using the remote key.
7
2
Share

Should You Apply Light Braking When Going Straight at an Intersection Ahead?

According to traffic regulations, it is necessary to slow down when approaching an intersection, so braking should be applied for safety. Situations requiring braking are as follows: Going straight through an intersection: For this scenario, not only should you brake in advance to reduce speed, but the speed when passing through the intersection should also not exceed 30km/h. Pedestrian crossings: Similar to passing through an intersection, apply the brake in advance to slow down. If there are pedestrians crossing, you must stop to yield and wait until they have completely passed before proceeding. Bus stops: Some regions may provide audio prompts for this scenario, while others may not. Candidates should not rely too heavily on audio prompts and should instead observe roadside signs in advance. Upon spotting a bus stop, estimate whether it is within 30 meters and then apply the brake to slow down. U-turns: When making a U-turn, it is essential to reduce speed and shift down to first gear before executing the maneuver. Setting aside examination requirements, attempting a U-turn at high speed or in a high gear can destabilize the vehicle and lead to dangerous situations, including rollovers.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.