Is the Ford Expedition available for sale in China?

What is the difference between a 1.5T engine and a 1.5L engine?

1.5T refers to a 1.5-liter turbocharged engine, while 1.5L represents a 1.5-liter naturally aspirated engine. The 'T' stands for turbocharged engine, and the 'L' stands for naturally aspirated engine. The differences between 1.5T and 1.5L are: Engine type: The 1.5T is a 1.5-liter turbocharged engine; the 1.5L is a 1.5-liter naturally aspirated engine. Power output: For cars with the same displacement, the power of a turbocharged engine is 1.3 times that of a naturally aspirated engine. Working principle: The 1.5T engine generates exhaust gases during operation, which drive the turbine, increasing the intake air and making combustion in the cylinders more efficient, thereby reducing fuel consumption and increasing horsepower. The 1.5L naturally aspirated engine primarily relies on the downward movement of the pistons, providing smooth power output and direct response. Acceleration: The 1.5T has more abrupt acceleration, with strong burst power and fast speed increase. The 1.5L offers smoother power output and a more refined and seamless driving experience. Fuel consumption: The 1.5L engine is more fuel-efficient than the 1.5T. However, when compared to cars with similar power output (e.g., 1.8L), the 1.5T is more fuel-efficient. Lifespan: The 1.5L engine has a longer lifespan than the 1.5T. A naturally aspirated engine can last until scrapping as long as it is maintained on time, not driven aggressively, and not damaged manually. Maintenance cost: The 1.5L engine is more cost-effective than the 1.5T. Turbocharged engines have higher requirements for both gasoline and engine oil. Price: The 1.5L engine is cheaper than the 1.5T, typically by around 10,000 yuan.

6

3

Share

What does Toyota Corolla EX mean?

Corolla-EX is the latest version of the Corolla. The Corolla EX body is almost the same as the Corolla, except the space is slightly smaller, mainly because the body width is reduced by about 20 centimeters. Another noteworthy point is that the Corolla EX does not use EPS steering. Below are the relevant details: 1. Exterior: The new Corolla is based on the existing Corolla EX model, with the facelifted version mainly featuring partial modifications to the front face. In addition to the chrome decoration added to the grille, the headlights also adopt a new design, and the bumper of the facelifted Corolla has been completely redesigned. Apart from significant changes to the front, the body and rear sections of the facelifted Corolla remain largely unchanged. Moreover, the body dimensions and wheelbase of the facelifted Corolla remain the same. 2. Powertrain: In terms of power, the facelifted Corolla continues to use the 1.6L Toyota 1ZR-FE all-aluminum inline four-cylinder engine. This engine has a displacement of 1.6L, with a maximum power output of 88kW/6000rpm and a peak torque of 152N.m/4400rpm. In terms of transmission, the facelifted model will be equipped with a 5-speed manual and a 4-speed automatic transmission.

11

0

Share

What series is the Toyota Levin car?

On January 4, 2021, the 2021 Levin family was officially launched, with 6 pure gasoline models and 6 hybrid dual-engine models. Below is the relevant introduction: 1. Exterior: The new Levin has added a sports kit for the sports version, including front and rear aerodynamic bumpers, a sports mesh piano black front grille, and sports-style exclusive seats. The gasoline sports version also adopts a low-profile body posture. The sports version of the new Levin has a more distinctive and aggressive appearance. 2. Interior: The sports version adds red trim elements distributed on the door panels and center console, with a red and black color scheme enhancing the sporty feel. The overall design style continues that of the old Levin, with no significant changes. Details include the addition of front and rear sliding functionality for the front armrest, improving practicality. 3. Powertrain: The gasoline models still feature a 1.2T+CVT powertrain combination, with a maximum power of 85kW and peak torque of 185N·m. The hybrid models are equipped with a 1.8L Atkinson cycle engine and Toyota THSII hybrid system, with the engine delivering a maximum power of 72kW and peak torque of 142N·m, and the motor providing a peak power of 53kW and peak torque of 163N·m, resulting in a system combined power of 90kW. The suspension remains a combination of front MacPherson strut and rear double-wishbone independent suspension.

14

1

Share

What type of engine oil should be used for Toyota Highlander 2.0t?

The original engine oil is suitable for Toyota Highlander 2.0t, with the oil grade being 0W-20. In terms of applicability, the original oil is more suitable for the engine. However, depending on different needs, engine oils can also offer other benefits such as noise reduction, fuel efficiency, and enhanced power performance. Therefore, you can also choose engine oils from brands like Mobil, Shell, and Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Toyota Highlander 2.0t is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply new oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made. After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.

15

4

Share

Introduction to Toyota Automatic Transmission Gear Positions?

The introduction to Toyota automatic transmission gear positions is as follows: P (Parking Gear): When this gear is engaged, the transmission locking mechanism activates, so it can only be engaged after the vehicle has come to a complete stop. R (Reverse Gear): This gear is used for reversing. It can only be engaged when the vehicle is stationary with the brake pedal pressed; it cannot be engaged while the vehicle is moving. N (Neutral Gear): The torque converter is in an idle state, and power cannot be transmitted to the drivetrain. Neutral is used for short-term parking. D (Drive Gear): Used for driving the vehicle forward. The drive gear is located below the neutral position. M (Manual Gear): In manual mode, the driver must manually increase or decrease the gear; the transmission will not intervene automatically. Usage of Paddle Shifters In the "D" gear position, press the brake and push the lever to the right to switch to manual mode. Then, you can use the "+" and "-" paddle shifters on the steering wheel to upshift or downshift. Although manual mode is more cumbersome, it allows precise control of gear shifts at the appropriate RPM and torque. Gear Selection for Different Road Conditions Uphill: When climbing a hill, more power is needed, so you should use "D-" to downshift the vehicle and obtain higher torque for climbing. Some slopes are not very steep, and if the gear is too low, it will waste power. In such cases, promptly use "D+" to upshift. If the power is still insufficient, you can use the S (Sport) mode. Downhill: Use "D+" to shift up to D2 or D3 gear to utilize engine braking. Generally, 2nd or 3rd gear is sufficient to control the vehicle. On particularly steep slopes, use 1st gear in combination with the brake pedal. If the vehicle starts accelerating uncontrollably downhill, promptly use "D-" to downshift and enhance the engine braking effect.

1

5

Share

How to Deactivate BMW's Transport Mode?

Open the driver's side door of the BMW. Press down on the brake pedal of the BMW. Press the BMW's start-stop button to start the engine. The dashboard lights up, indicating that the BMW's engine is running. Now, hold down the start-stop button for about 15 seconds.

10

5

Share

Is the Ford Expedition available for sale in China?

What is the difference between a 1.5T engine and a 1.5L engine?

What does Toyota Corolla EX mean?

What series is the Toyota Levin car?

What type of engine oil should be used for Toyota Highlander 2.0t?

Introduction to Toyota Automatic Transmission Gear Positions?

How to Deactivate BMW's Transport Mode?

What is the Toyota Further?

Is the 2021 Corolla included in Toyota's recall?

Why do Toyota vehicles use DOT3 brake fluid?

What is the L gear in Toyota?