Is the first maintenance mandatory for the Emgrand new car within three months?

1 Answers
DelArthur
07/30/25 4:22am
Emgrand new car is not required to undergo the first maintenance within three months. Introduction to the first maintenance: The first maintenance of a car is the initial mandatory maintenance after the car leaves the factory. In China, except for imported models, the first maintenance for domestic and joint-venture models is basically free, and the oil change is not charged. First maintenance items: The first maintenance involves changing the engine oil and oil filter. While changing the oil and filter, a comprehensive inspection of the vehicle will be conducted, including checking all lights, the levels of all vehicle fluids, whether all electrical system functions are normal, tire inspection and pressure adjustment, whether all chassis components are normal, and whether there is any oil leakage in the engine and transmission, and if they are working normally. A professional diagnostic device will be used to conduct a computer inspection of the entire vehicle, and the maintenance reminder will be reset. Timely maintenance and servicing throughout the vehicle's lifecycle can significantly increase the overall lifespan of the vehicle. Other items: A few vehicles may also require changing transmission oil and differential oil during the first maintenance. The specific requirements should be based on the maintenance manual, as different brand models may have different requirements. However, most vehicles generally undergo the first maintenance between 3,000 to 5,000 kilometers, and some brand models may require the first maintenance at around 8,000 to 10,000 kilometers.
Was this review help?
14
4
Share
More Forum Discussions

How to activate cruise control on Volkswagen Tiguan?

To activate cruise control on the Volkswagen Tiguan, press the cruise control switch located on the lower left side of the steering wheel. Below is more information about cruise control: 1. Principle: The cruise control module reads the pulse signal from the vehicle speed sensor and compares it with the preset speed, then issues commands. The servo mechanically adjusts the throttle opening to increase or decrease, ensuring the vehicle maintains the set speed. 2. Function: After setting the desired speed via the switch, the system automatically maintains the speed without requiring the driver to press the accelerator pedal, allowing the vehicle to travel at a constant speed. 3. Basic functions: (1) Cruise control function. (2) Speed fine-tuning increase. (3) Speed fine-tuning decrease. (4) Electronic fuel-saving function. (5) Accelerator pedal function.
13
4
Share

Can 12123 Check Others' Vehicle Violations?

12123 can check others' vehicle violations. Here are the relevant details: 1. Real-time query of violation information: Through the platform, users can check and dynamically track personal information such as vehicle, driving license, and traffic violations at any time. They can also obtain real-time updates on road conditions, hazardous road sections, road construction, and precautions for severe weather, enabling better travel planning for safety. The traffic management department also proactively pushes notifications about vehicle annual inspections, driving license reviews, and traffic violation points through the platform to inform vehicle owners and drivers. 2. Self-service functions: The platform has expanded the range of non-personally owned vehicles that can be registered. Drivers can register up to 3 non-personally owned small cars through the 12123 platform. After registration, drivers can deregister at any time and re-register other non-personally owned small cars.
2
4
Share

What is the difference between GF-5 and GF-6 engine oils?

The difference between GF-5 and GF-6 engine oils is that the GF-6 specification includes numerous improvements, such as: 1. Maintenance: Fuel economy and fuel economy maintenance. 2. Durability: Engine durability. 3. Protection: Wear protection during idle-stop conditions. 4. Minimization: Minimization of low-speed pre-ignition. 5. Reduction: Reduction in oil aeration and engine oil air entrainment. 6. Decrease: Decrease in turbocharger deposits. Additional relevant information includes: 1. Fuel economy: Building on the SP standard, GF-6 imposes higher requirements on the fuel economy of engine oils, which can lead to lower fuel consumption for the engine. 2. GF-5 phase-out: GF-5 certification will be discontinued starting May 1, 2021. The performance of GF-1 to GF-5 oils will be replaced by GF-6A oils.
2
3
Share

What are the effects of carbon deposits on a car?

Effects of carbon deposits on a car: Causes poor engine performance, resulting in abnormal phenomena such as difficulty starting, unstable idling, poor acceleration, backfiring when accelerating sharply, excessive exhaust emissions, and increased fuel consumption. Carbon deposits refer to a mixture accumulated on the engine's valves, combustion chamber, and intake pipes, formed when the engine's fuel does not fully combust, producing hydrochloric acid and resin-like adhesives under high temperature and oxygen catalysis, which adhere to the surfaces of components. Methods to remove carbon deposits: Engine disassembly and cleaning are required to thoroughly remove carbon deposits from components using detergents, ultrasonic methods, etc.
5
2
Share

Why are some license plates green?

Some license plates are green, which is differentiated based on factors such as vehicle usage and size. There are two common types of green license plates: special license plates for new energy vehicles and civil aviation license plates. Special license plates for new energy vehicles: These are divided into small new energy vehicle license plates and large new energy vehicle license plates. License plates are plates mounted on the front and rear of a vehicle, typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. License plates serve as identification and information registration for vehicles, allowing people to determine the vehicle's region of registration and trace the owner and registration details through the license plate.
18
1
Share

What does the RST button on car navigation mean?

RST on car navigation stands for the reset button, which can restore the navigation system to factory settings. The RST button is usually located on the front panel of the navigation device as a small pinhole. When the device is powered on, use a toothpick to press it. After hearing a sound, restart the navigation system to complete the factory reset. The car GPS navigation system consists of two parts: one part includes the GPS receiver and display device installed in the car, and the other part is the computer control center. These two parts communicate via positioning satellites. Car navigation uses onboard GPS combined with electronic maps to conveniently and accurately guide drivers to their destinations via the shortest or fastest routes, making it a great assistant for drivers.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.