···
Log in / Register

Is the first maintenance free and how long does it take?

6Answers
LeNaomi
07/29/2025, 03:16:12 PM

The first car maintenance is free and can be completed in just over an hour. Here are the benefits of regular car maintenance: 1. Fuel savings: Regular car maintenance can achieve an 11.36% fuel saving effect; replacing spark plugs alone can result in an average 3% fuel saving. 2. Extend the service life of engine oil and transmission oil: After using high-quality high-tech maintenance products to clean and protect the engine lubrication system, the engine oil remains as clean as new even after 10,000 kilometers of use. 3. Reduce emissions: After a full vehicle maintenance adjustment, the CO emissions during idle driving are reduced by an average of 45.37%.

Was this review help?
120
Share
MacThomas
08/14/2025, 09:45:05 AM

When I first bought my new car, I was also worried about the cost of the first maintenance. Actually, the first maintenance is usually provided free of charge by the manufacturer, so you don’t have to pay a penny. In terms of timing, it’s normally required within 5,000 kilometers or 6 months, whichever comes first. That time, I drove 4,800 kilometers in about four months and went to the 4S store. The whole process was quite fast—just an oil change, oil filter replacement, and a full vehicle check. I had a cup of coffee in the lounge, and it was done in about an hour or so. However, be aware that if you exceed the time or mileage limit, you’ll have to pay for it yourself. After the first maintenance, the shop will remind you of the next service time. I recommend making a phone appointment in advance to save queuing time. Don’t forget to bring your maintenance manual, as it’s the proof for free service.

Was this review help?
18
Share
Expand All
Albert
10/15/2025, 12:16:24 AM

Free first maintenance is a common practice among almost all car brands. After purchasing a vehicle, the 4S dealership will clearly inform you about the conditions for the first maintenance. The time frame is typically around six months or 5,000 kilometers, depending on the specific model. Last week, I accompanied a friend for their first maintenance, which took a total of 1.5 hours: 10 minutes for registration, about 50 minutes for the actual maintenance (oil and filter change), and 30 minutes for final checks like tire pressure and lights. It was completely free, but exceeding the specified limits—for example, driving 7,000 kilometers before going—would require paying a basic maintenance fee of around 300-400 RMB. It's advisable to start monitoring the odometer around four months after purchase and schedule an appointment in advance to avoid weekend crowds, as weekday mornings are less busy and faster.

Was this review help?
17
Share
Expand All
DiCole
11/28/2025, 12:06:07 AM

The first maintenance is completely free, I just had it done in March without any cost. The time requirement is crucial, basically, you must go within 5000 kilometers or six months, whichever comes first. The maintenance process was faster than expected. After registration, I handed over the keys to the service department. They changed the engine oil and oil filter, plus a basic inspection. I was in the lounge scrolling through my phone, and within less than two hours, I was notified to pick up the car. If it's during a peak maintenance period, you might have to wait longer, so it's recommended to make a phone appointment in advance. Be careful not to lose the maintenance manual, as it serves as the proof for free service. Even if you exceed the specified time by just one week, the 4S shop may charge you for labor costs.

Was this review help?
13
Share
Expand All
DelRicardo
01/18/2026, 01:29:56 AM

I had a good experience taking my child for the first maintenance. It was completely free and saved time. Most cars have a first maintenance deadline of six months or 5,000 kilometers. My car had run 4,500 kilometers in five months when I took it in. I booked an appointment one day in advance, and upon arrival, the paperwork was done directly. The maintenance included an oil change, oil filter replacement, and a full vehicle safety check. The actual operation was completed in one and a half hours. During that time, I played with my child in the kids' play area, and it was faster than expected. However, it's important to remember to do it within the deadline—my neighbor went two months overdue and was charged 200 yuan for the oil change. I recommend setting a reminder on your phone early to avoid missing the free period.

Was this review help?
13
Share
Expand All
SanRiver
04/14/2026, 03:04:48 AM

The first maintenance service is indeed free, but it must be done within the manufacturer's specified time frame, usually within 5,000 kilometers or six months. I just had mine done last month, and the entire process takes 1-2 hours: vehicle registration takes 5 minutes, oil and filter replacement takes 40 minutes, system inspection takes 30 minutes, and car wash and handover take 15 minutes. It's recommended to go at 9 a.m. on a weekday to avoid crowds and queues. Note that the free service only covers basic maintenance items. If severe engine carbon buildup is detected and requires cleaning, such additional services will incur charges. Remember to bring the maintenance manual and purchase invoice, as these are the credentials for the free service.

Was this review help?
19
Share
Expand All
More Q&A

What is the difference between No. 0 diesel and No. -35 diesel?

The differences between No. 0 diesel and No. -35 diesel are as follows: 1. Different freezing points: The freezing point of No. 0 diesel is higher than that of No. -35 diesel. Diesel is graded by freezing point, with light diesel having six grades: 5, 0, -10, -20, -35, -50, and heavy diesel having three grades: 10, 20, 30. That is, the freezing point of No. 0 diesel is 0 degrees Celsius, and the freezing point of No. -35 diesel is -35 degrees Celsius; 2. Different applicable temperatures: No. 0 diesel is suitable for environments with temperatures above 4℃, while No. -35 diesel is suitable for environments with temperatures between -14℃ and -29℃; 3. Different anti-freeze agent contents: No. 0 diesel has a lower anti-freeze agent content than No. -35 diesel. The main components of No. 0 diesel and No. -35 diesel are the same, and their combustion heat values are also the same. The difference lies in the content of anti-freeze agents. Generally, the higher the grade, the higher the minimum combustible temperature.
115
Share

What Causes Abnormal Noises in the Vehicle Chassis?

Here are the reasons for abnormal noises in the vehicle chassis: 1. Noises during vehicle startup are generally caused by faults in the suspension system, possibly due to loose or damaged engine mounts. 2. Noises during vehicle steering may be caused by faults in the steering system or suspension system. As the vehicle tilts during steering, the suspension system deforms and participates in the movement. 3. Noises during driving on good road conditions may be caused by faults in the braking system components, such as loose or worn parts, out-of-round brake drums, or uneven brake discs. 4. It could also be due to issues with the bearings that connect moving and stationary parts. If it's a bearing issue, the driver can identify it by applying slight braking. If the noise remains unchanged when braking at a constant speed, it indicates a bearing problem. 5. Noises during driving on poor road conditions are mostly caused by issues in the suspension system or possibly loose braking system components. 6. Noises during acceleration, deceleration, or stopping are mostly caused by the suspension system or braking system. Friction sounds from the suspension system are common. To reduce these noises, drivers should avoid rough driving, minimize bumps, slow down on poor road conditions, and avoid driving through water, which can effectively reduce abnormal noises in the vehicle chassis.
111
Share

Why Does the Shock Absorber Make Metal Noise When Cold but Not When Hot?

This situation usually occurs due to oil leakage from the shock absorber or damage to the shock absorber itself. The owner can inspect it themselves or visit a professional 4S shop or repair shop for inspection and maintenance, which may involve replacing the shock absorber. Below is some relevant information: 1. Definition of Shock Absorber: The car shock absorber (including the shock spring) is the most important component in the vehicle's vibration filtering system. 2. Function of Shock Absorber: It absorbs vibrations and impacts caused by uneven road surfaces during driving, thereby providing a comfortable ride for passengers. 3. Hazards of Damaged Shock Absorber: Once the shock absorber is damaged, the vehicle may experience excessive bumpiness and instability while driving, which can severely impact driving safety in serious cases. 4. Common Damages to Shock Absorbers: (1) Abnormal Noise: If the shock absorber makes unusual noises when driving on bumpy roads, it is highly likely that the shock absorber is damaged. (2) Oil Leakage: By using a flashlight to inspect the shock absorber through the wheel arch, if oil leakage is observed on the exterior of the shock absorber, it indicates that the shock absorber is already damaged. (3) Loose Chassis: When driving on bumpy roads, if the vehicle's body exhibits excessive bumpiness and instability, it is often a sign that the shock absorber is malfunctioning.
113
Share

Which Gear is Most Effort-Saving for Mountain Bikes When Climbing Uphill?

When climbing uphill on a mountain bike, using gears 1-7 is the most effort-saving. Here are the specific details about mountain bikes: 1. Creation Background: Mountain bikes are specifically designed for off-road travel (hills, trails, wilderness, and gravel roads, etc.) and were first introduced in 1977 in San Francisco on the West Coast of the United States. 2. Development Prospects: The focus of the global bicycle industry is shifting from traditional commuting vehicles to sports, mountain, and leisure types. In developed countries like the U.S., Europe, and Japan, bicycles are a common product for sports, fitness, leisure, and entertainment. 3. Main Features: The primary characteristics of mountain bikes include wide tires and straight handlebars. The wide and multi-toothed tires provide traction, and shock absorbers help absorb impacts. 4. Gear Performance: Mountain bikes typically come with 11-speed, 18-speed, 20-speed, 21-speed, 24-speed, 27-speed, and 30-speed options. Proper use of the gear system allows riders to handle complex terrains and weather conditions such as flat roads, uphill and downhill slopes, dirt roads, and headwinds, making them faster and more effort-saving than regular bicycles.
112
Share

Must the driver's license expire before it can be renewed?

A driver's license does not have to expire before it can be renewed. Motor vehicle drivers should apply for renewal at the vehicle management office where the driver's license was issued within 90 days before the expiration of the license's validity period. When applying, the "Motor Vehicle Driver's License Application Form" should be filled out. Other methods for renewing a driver's license are as follows: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expiration Renewal Service -- Fill in the information. The new license is generally delivered by mail. Go to the "Police-Medical-Post" service point at the postal business hall to process the renewal. The entire process, from registration and physical examination to the production of the new license, takes only half an hour. Currently, only a few cities have opened this service, such as Hangzhou. Renewal materials: Bring two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driver's license, and a physical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office).
120
Share

What are the distances for viewing the rear car in the right side mirror?

When the rear car occupies 1/3 of the area in the right side mirror, the distance is approximately 15 meters. When the rear car occupies half of the right side mirror, the distance is about 10 meters. When the rear car occupies half of the right side mirror, this indicates the rear car is very close, and it is not advisable to perform turning maneuvers. Function of rearview mirrors: The rearview mirror is one of the important safety components of a motor vehicle's body, used to observe the road conditions behind the car during reversing and to monitor the surroundings while driving. For the convenience of the driver and to prevent traffic safety accidents, ensuring personal safety, all countries mandate that vehicles must be equipped with rearview mirrors, and all mirrors must be adjustable in direction. Classification of rearview mirrors: There are mainly two types of rearview mirrors in vehicles: one is a flat mirror, which, as the name suggests, has a flat surface, similar to typical household mirrors, providing an image the same size as seen by the naked eye. This type of flat mirror is commonly used as the interior rearview mirror. The other type is a convex mirror, which has a spherical surface with varying radii of curvature. Its image is smaller than what the naked eye sees but offers a wider field of view, functioning like a camera's "wide-angle lens." This type of convex mirror is commonly used as the exterior rearview mirror and the lower rearview mirror.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.