Is the first maintenance for Audi A4 free?

2 Answers
VonJosephine
09/05/25 6:22am
Generally speaking, the first maintenance for a car is free. When purchasing a car, you will receive a car warranty manual. Bring this manual to the brand's 4S store to proceed with the first maintenance. The first maintenance is crucial and should be done on time. During this maintenance, the vehicle can be inspected to confirm its usage condition. Notes for the first car maintenance: Follow the scheduled maintenance time. Every car comes with a maintenance manual upon leaving the factory, which indicates the maintenance intervals. Car owners can refer to the information in the manual for the first maintenance. When purchasing a car, sales personnel usually remind consumers to perform the first maintenance at a certain time or after reaching a certain mileage. Items included in the first maintenance. The first maintenance typically includes free oil and oil filter replacement, along with a comprehensive vehicle inspection, usually taking about half an hour. The first maintenance can be done at a 4S store or a nearby location, but only cars serviced at a 4S store for their first maintenance can enjoy the car's quality guarantee. Pre-check any issues before the first maintenance. During the break-in period, car owners can evaluate the vehicle's condition. If there are any concerns, they can promptly report them to the technicians during the first maintenance.
Was this review help?
15
2
Share
DiAndrew
09/17/25 6:42am
I've been driving an Audi A4 for three years and found that whether the first service is free depends on the specific purchase contract. Generally, Audi dealers offer a free first service as a promotion when selling new cars, including oil and filter changes along with some basic inspections, typically around 10,000 kilometers. My first maintenance visit to the 4S dealership was free, which felt like a great deal and helped avoid minor issues later. However, this varies by region and purchase method; if buying a used car from the secondary market, free services might not be included. In short, I recommend calling your local dealer in advance to confirm and bringing your purchase records—this could save you hundreds. Regular maintenance is key to your car's health, so don’t overlook the engine's condition.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Are the Prado and Land Cruiser Prado the same car?

Toyota Prado and Toyota Land Cruiser Prado are the same model, just with different names. Prado is the actual name of this SUV. Features of Toyota Prado: The Prado is the latest model in Toyota's Land Cruiser series, with excellent power performance and Euro III emission standards. The advanced engine equipped in the Prado provides strong output power and torque, combined with a highly sturdy frame and reinforced suspension system, making the journey comfortable and smooth. Advantages of Toyota Prado: The Toyota Prado has a good vibration damping system, featuring a traditional ladder-frame body and rigid axle rear suspension design, which can smooth out bumps and potholes on the road during driving. Additionally, the new Prado adopts a newly developed high-rigidity body frame and a fully automatic air conditioning system with independent left and right control, making it suitable for strong sports performance while ensuring a stable and safe driving experience for passengers.
1
1
Share

Why does the Magotan have severe jerking and impact sensations?

Magotan's severe jerking and impact sensations are caused by automatic gear shifting. The principle of automatic transmission is the same as that of manual transmission, both involving the conversion between large and small gears. During the conversion process of the sun gear and planetary gear ring in an automatic transmission, jerking sensations can occur. Taking the Magotan 2020 280TSI DSG Comfort model as an example: it is a mid-sized 4-door 5-seater sedan equipped with a 7-speed dual-clutch transmission and a fuel tank capacity of 66L. The engine of the Magotan 2020 280TSI DSG Comfort model has a maximum torque of 250 Nm, with the maximum torque range between 1,750 and 3,000 rpm. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
12
5
Share

What Does Cylinder Topping Mean?

Cylinder topping refers to the situation where the connecting rod becomes excessively long due to excessive clearance in the connecting rod, causing it to hit the engine cylinder when the engine is running. Causes of engine cylinder topping: Broken spring: The intake or exhaust valve spring breaks, causing the valve to fall into the cylinder; it may also be due to hard objects falling into the combustion chamber. Excessive gasket thickness: During an overhaul, the connecting rod bearing replacement is too thick, or the gasket is too thick; or the piston geometric dimensions do not meet the requirements. Cylinder gasket failure: Frequent cylinder gasket failures can damage the cylinder block surface, and excessive repair can cause the piston to exceed the cylinder block surface when it reaches the top dead center, leading to cylinder topping. Poor fuel quality: The cause of engine cylinder topping may be the use of low-quality fuel by the owner, which causes the fuel to solidify near the valve stem after the engine is turned off, resulting in the valve sticking when the engine is cold and causing cylinder topping upon startup.
11
4
Share

Is it necessary to do maintenance at a 4S shop?

If the car is within the warranty period, it is recommended to go to a 4S shop for maintenance; if the car is out of the warranty period, you can choose to go to a 4S shop or other repair shops for car maintenance. Car maintenance items: Car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Among them, the content of minor maintenance is to replace engine oil, oil filter, intake filter, air conditioning filter, etc.; major maintenance items include transmission oil, engine spark plugs, timing belts, etc.; at the same time, replace brake fluid, brake pads, engine coolant, and vehicle tires. Precautions for car maintenance: If the user does not go to the designated 4S shop or the manufacturer's designated authorized repair shop for regular maintenance within the specified mileage after purchasing a new car, even if it is within the warranty period, the user will have to pay a certain amount of repair costs if problems occur.
20
0
Share

What Are the Reasons for Increased Car Noise?

Reasons for increased car noise include insufficient engine oil, poor fuel combustion, and premature fuel supply timing. Insufficient engine oil: Various components cannot receive normal lubrication, and wear leads to increased engine noise. Adding engine oil can solve the problem. Poor fuel combustion: Low injection pressure, fuel injector dripping, poor fuel atomization, and delayed fuel supply timing can all cause poor fuel combustion, leading to knocking and increased engine noise. The fuel injector should be removed for inspection and adjustment, and the fuel supply timing should be adjusted. If necessary, replace the parts to meet the specifications. Premature fuel supply timing: When the piston movement has not reached the specified position, the fuel injector starts injecting fuel, causing premature fuel combustion. High-pressure gas in the cylinder impacts the piston, producing a rhythmic sound. This issue can be resolved by adjusting the fuel supply timing.
10
5
Share

Can the Geely Thor Hybrid get a green license plate?

Geely Thor Hybrid is a hybrid electric vehicle and cannot get a green license plate. Conditions for obtaining a green license plate: Purchasing a new energy vehicle allows you to get a green license plate, including four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar cars), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as supercapacitors, flywheels, and other high-efficiency energy storage devices). Process for obtaining a green license plate: Open the traffic management bureau website, log in to the local website, select business processing, choose new energy vehicle license plate pre-selection, enter the pre-selection section to select your vehicle, click the confirm button below, submit for review and make an appointment, schedule a processing time, return to the business processing section, and select new energy vehicle license plate reissuance appointment. Start the appointment, choose a time and vehicle management office for license plate issuance, and pick up the license plate at the scheduled time.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.