Is the first maintenance for a motorcycle at 500 or 1000 kilometers?

How to Clean the Throttle Body by Yourself?

Self-cleaning the throttle body process is as follows: 1. If there is a plastic heat shield cover on the engine, it needs to be removed first. 2. After removing the engine cover, the throttle body can usually be seen. The throttle body is connected to some air pipes around it, which need to be removed, and the positions of each pipe should be noted clearly. 3. After removing the air pipes on the throttle body, the entire throttle body can be taken off. The throttle body is fixed to the engine block with 4 bolts, and it can be quickly removed using the appropriate tools. 4. The side of the throttle body near the combustion chamber is usually dirtier, with black carbon deposits, which is the main area to be cleaned. 5. Cleaning the throttle body mainly involves removing the carbon deposits on it. Special throttle body cleaning fluid or carburetor cleaner can be used. Please note that the cleaning principle of such cleaners is to dissolve carbon deposits, and their ingredients are harmful to the human body. It is best to wear gloves and a mask during cleaning. 6. Spray the cleaner onto the areas of the throttle body with more carbon deposits and wait for it to dissolve the carbon deposits, which takes about 5-10 minutes. Using a brush can speed up the removal of carbon deposits. 7. Once the dirt on the throttle body has been completely dissolved, you can use a clean towel to wipe off the cleaner inside the throttle body.

20

2

Share

Can Modified Headlight Assembly Pass Annual Inspection?

Modified headlight assembly cannot pass annual inspection. According to China's Road Traffic Safety Law, no unit or individual may assemble motor vehicles or alter the registered structure, construction, or characteristics of motor vehicles without authorization. Without permission from the public security traffic management department, it is prohibited to modify the chassis, engine, suspension, transmission system, steering system, tire rims, headlights, body color painting, or exterior structure of motor vehicles. Therefore, modifying headlights is a violation of the law and will result in failure to pass the annual inspection. Inspection standards for vehicle headlights during annual inspection: 1. The color temperature must not exceed 6000K. If it exceeds 6000K, the inspection will not detect the value, and the vehicle will not pass the annual inspection; 2. According to the regulations in the Road Traffic Safety Law, vehicle operation must not affect other road users. The light source of the headlights must not interfere with others, and integrated headlights must be used when modifying headlights; 3. The brightness must not be too low, with the low beam illumination required to be above 1200 lumens. In addition to headlight inspection, the annual inspection also includes checks on exhaust emissions, vehicle appearance, braking system, chassis, and other items.

17

0

Share

How to Remove the Car Cigarette Lighter?

Methods to remove the car cigarette lighter: 1. Unscrew the shell: For some cars, the cigarette lighter socket has a screw-on shell at the back, which can be unscrewed by turning it counterclockwise and reinstalled by turning it clockwise; 2. Remove screws: For some cars, the cigarette lighter socket is secured with screws at the back. Simply use a wrench to remove the screws to take it off, and reinstall by screwing them back in; 3. Remove the panel: Take off the gear shift lever panel, which is held by plastic clips. Just lift one side by hand or pry it open with a flathead screwdriver to remove the entire panel; 4. Remove panel screws: After removing the gear shift lever panel, the cigarette lighter panel door will automatically open. You will see two black screws that can be removed using an M4 hex key; 5. Remove the panel box: Simply pull out the plastic panel box of the cigarette lighter by hand. When it is pulled out about 10 cm, disconnect the wiring first to fully remove the entire box; 6. Operate the inner and outer rings: The cigarette lighter consists of an outer ring and an inner ring. When using it, press the inner ring in until it reaches a certain temperature, and it will automatically return to its original position. Then, pinch the outer ring and pull it out.

13

2

Share

Does the Auto Start-Stop Function Damage the Engine?

Engine start-stop function does not damage the engine. Here are the relevant explanations: 1. Reason: Most wear on car engines comes from instantaneous wear during cold starts, which relies on oil film lubrication inside the engine. Auto start-stop durations are very short, and the oil pumped up by the oil pump to adhere to the inner surface of the engine cylinder does not completely flow back, leaving plenty of oil on the components. Under hot start conditions, it has no significant impact on the engine. 2. Endurance testing: Currently, the vast majority of automotive manufacturers conduct thorough endurance tests when introducing auto start-stop systems, including testing the number of switch cycles for components such as engine ignition switches and starters.

18

5

Share

What Causes the Car Air Conditioner Fan to Stop Working?

Here are the specific reasons and solutions for a car air conditioner fan not working: 1. Poor contact of the main control switch: Repair method: Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, it should be repaired or replaced. 2. Damage to the fan motor coil: Repair method: Use a multimeter to measure the contact resistance of the main control switch. If the resistance is too high or zero, it should be repaired or replaced. 3. Loose fastening screw between the motor and the fan blade: Repair method: Tighten the fastening screw. 4. Open or short circuit of the fan capacitor: Repair method: Check the capacitor and replace it with one of the same specifications.

19

0

Share

What Does Lifelong Cell Warranty Mean?

Lifelong cell warranty refers to the manufacturer's commitment to provide free repair and replacement services for the battery cells in the vehicle's battery if they fail, throughout the lifetime of the vehicle. However, it's important to note that this is not the same as battery warranty. If the battery experiences normal wear and tear and the cells are not faulty, it will not be covered under warranty. Below is an introduction to related content: Other components: The cell is the most important component inside the battery. In addition to the cell, the battery also includes parts such as the casing, circuit board, wires, and connectors, which link and deliver power. From a cost perspective, the cell is the most core and critical part of the battery.

17

2

Share

Is the first maintenance for a motorcycle at 500 or 1000 kilometers?

How to Clean the Throttle Body by Yourself?

Can Modified Headlight Assembly Pass Annual Inspection?

How to Remove the Car Cigarette Lighter?

Does the Auto Start-Stop Function Damage the Engine?

What Causes the Car Air Conditioner Fan to Stop Working?

What Does Lifelong Cell Warranty Mean?

Where is the cabin air filter located on the Dongfeng Peugeot 308?

What are the differences between part-time four-wheel drive and on-demand four-wheel drive?

What is the curb weight of the Chery Flagcloud 1?

When Should You Turn on the Internal Air Circulation?