Is the First Inspection for a New Car Necessary?

1 Answers
ElleAnn
07/29/25 12:12pm
New car first inspection is not necessary. The first inspection of a car is usually done after three months. The first inspection is also known as the first maintenance. The first maintenance items include: 1. Replace the engine oil and oil filter, check the working condition of the braking system, such as the gap and wear of the brake pads and brake discs, tighten the bolts of each system, check and adjust the transmission belt, check and adjust the tire balance and alignment; 2. Check and replenish various oils, check the working condition of components such as lights, battery, shock absorbers, etc. After completing the first maintenance, it indicates that the running-in period of the vehicle has ended, and the vehicle can be driven according to the standard load and normal speed specified by the vehicle.
Was this review help?
16
1
Share
More Forum Discussions

Where to Add Windshield Washer Fluid for Arrizo 5?

Arrizo 5's windshield washer fluid reservoir is located in the engine compartment, next to the coolant tank, marked by a blue plastic cap. When refilling the washer fluid, do not exceed the MAX mark; always leave some space. Overfilling not only wastes fluid but may also cause rust on engine components. The Arrizo 5 is a compact sedan produced by Chery, with dimensions of 4572mm in length, 1825mm in width, and 1482mm in height, and a wheelbase of 2670mm. It is equipped with a 1.5L naturally aspirated engine delivering a maximum power of 116 horsepower and a peak torque of 141 Nm, paired with either a 5-speed manual transmission or a 7-speed CVT. The manual transmission features a gear shift reminder, while the CVT offers both Eco and Sport modes for a more versatile driving experience.
8
5
Share

What is the proper position for adjusting the seat forward and backward in Subject 2?

For adjusting the seat forward and backward in Subject 2, lean back naturally against the seat back, extend your arms naturally, and your wrists should rest exactly on the highest point of the steering wheel for the proper position. Below are the precautions for Subject 2: 1. Reverse parking: The main points for deduction in reverse parking include pressing the line while reversing, the car not entering the parking space, exceeding the time limit, and not following the prescribed route. Reverse parking must be completed within 210 seconds; exceeding the time limit results in failure. During the test, first reverse to the right, then to the left. Not following this sequence results in failure. While reversing, pay attention to the 30cm margin issue. 2. Parallel parking: The main points for deduction in parallel parking include the turn signal, 30cm margin, and pressing the line. When entering the test area, turn right in advance and observe the highest point of the wiper aligning with the roadside line to adjust the 30cm margin. While reversing, remember the first right full turn, straightening, left full turn, parking in the space, turning on the left turn signal, and observing the rearview mirror when exiting to prevent the wheels from pressing the line. 3. Right-angle turn: The main points for deduction in the right-angle turn include the turn signal and pressing the line. After entering the test area, turn on the turn signal. After the voice prompt, turn off the turn signal. Incorrect operation of the turn signal deducts 10 points. After entering the right-angle turn, adjust the body to maintain a 30cm margin from the line. The reference point is the same as in parallel parking. When making a full turn, slightly release the clutch to prevent stopping or stalling midway. Straighten the body after the rear wheels exit to prevent the wheels from pressing the line.
2
4
Share

Why is the Mondeo called 'Mengdiudiu'?

The pronunciation 'mengdio' when spoken quickly becomes 'mengdiuo', and even faster becomes 'mengdiuu'. Due to the affectionate nature of reduplicated words, it was named 'Mengdiudiu'. Additional information about the Mondeo is as follows: 1. Configuration: The Ford New Mondeo offers 7 models with two engine options: 1.5T and 2.0T. The new Mondeo adopts Ford's latest family-style exterior design, with the most noticeable feature being the 'catfish mouth' grille + dual chrome horizontal bars. All models come with LED headlights, which refers not only to the LED daytime running lights but also the main headlight source being LED. 2. Body: The side profile of the new-generation model is actually quite similar to the current Mondeo Zhisheng. However, the new model features more pronounced upper and lower door character lines, giving it a lower center of gravity. The most significant difference is that the rearview mirror brackets have been moved from the window corners to the door panels to reduce blind spots in the A-pillar. 3. Powertrain: Additionally, the turn signals on the rearview mirrors have been upgraded to LED bulbs. Apart from the differences in headlights, the chrome trim on the new car varies depending on the model configuration. The two 1.5T models only have chrome trim along the lower edge of the windows, while all 2.0T models feature chrome trim around the entire window frame. Furthermore, the 2.0L GTDi240 Luxury Sport model comes with a spoiler and an 'S' badge, while the 2.0L GTDi240 Premium and Flagship models feature a 'TITANIUM' badge to highlight their high-end status.
2
4
Share

What engine does the Ruifeng S7 have?

The Ruifeng S7 is equipped with two types of engines: a 2.0T engine and a 1.5TGDI engine. The 2.0T engine is paired with a 6-speed dual-clutch automatic transmission, delivering a maximum power of 140 kW and a maximum torque of 300 Nm. The 1.5TGDI engine comes with either a 6-speed manual transmission or a 6-speed dual-clutch automatic transmission, offering a maximum power of 128 kW and a maximum torque of 251 Nm. The Ruifeng S7 is a compact SUV with dimensions of 4790 mm in length, 1900 mm in width, and 1760 mm in height, and a wheelbase of 2750 mm. The Ruifeng S7 features the Jianghuai family-style "Baopingkou" front grille, adorned with three chrome trim strips, seamlessly connected to the headlight clusters on both sides. The rear of the vehicle incorporates a horizontal chrome trim strip that links the tail lights on either side.
7
2
Share

How to Solve the Problem of Car Key Failure and Unable to Start?

The solutions for car key failure and inability to start the car are as follows: 1. The remote key usually has a metal key blade. There is generally a switch on the remote key; flipping it allows you to pull out the key blade. Insert this blade directly into the door's keyhole to open and lock the car door. 2. Depending on the brand, there are usually three methods to start the car when the remote key fails: (1) Place the remote key against the push-to-start button and wait a moment to start the car (this method works for most vehicles). (2) Locate the remote key slot (often hidden somewhere inside the car, such as inside the center console or under the cup holder mat), insert the remote key into this slot, and wait a moment for the car to sense the key before starting. (3) Find the hidden mechanical keyhole (usually concealed behind the push-to-start button, which may need to be removed), insert the key blade from the remote key, and start the car as you would with a regular vehicle.
4
3
Share

Where is the handbrake on a Lexus?

Most Lexus models are equipped with a foot brake or an electronic handbrake. The foot brake is located under the steering wheel on the driver's side; pressing it is equivalent to pulling the handbrake. The operation of the foot brake is similar to that of the handbrake. Once the foot brake pedal is pressed, the car will stop. When driving, pressing the foot brake pedal again will allow the car to move forward. More information about the handbrake is as follows: 1. When using the handbrake, pull it upward to stop the car. Lowering the handbrake lever while driving will allow the car to move. 2. The electronic handbrake button is usually located behind the gear lever. Cars equipped with an electronic handbrake have handbrake motors on both rear wheels. Pressing the electronic handbrake button will cause the motor to clamp the brake pads, preventing the car from rolling. 3. Cars with an electronic handbrake often also feature an autohold function, which is very useful when waiting at traffic lights. If you can't find the handbrake on your Lexus and there is no electronic handbrake button, look down near the brake pedal to find the foot brake pedal.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.