Is the Ferrari 488 a manual transmission?

1 Answers
JoelMarie
07/30/25 3:13am
Ferrari 488 does not have a manual transmission model. All current models are equipped with a 7-speed dual-clutch transmission. The dimensions of the Ferrari 488 in current models are 4605mm in length, 1975mm in width, and 1206mm in height, with a wheelbase of 2650mm. The safety features of the Ferrari 488 in current models include: driver and passenger airbags, front side airbags, front head airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, run-flat tires, ABS anti-lock braking, brake force distribution, brake assist, traction control, and electronic stability control. The Ferrari 488 demonstrates more mature application of aerodynamics, with a powerful front face perfectly combined with a streamlined body, making this Ferrari 488 more aggressive. The black and red interior is full of wild passion.
Was this review help?
9
3
Share
More Forum Discussions

What Fault Does the Battery Light Indicate?

When the car battery light illuminates, it alerts the driver to promptly inspect the vehicle for faults. If the battery light comes on before starting the vehicle, it indicates that the alternator or battery is not charging. Possible causes for the battery light to illuminate include: 1. Battery malfunction, such as depleted charge or battery failure. The solution is to use a multimeter to test the battery voltage; recharge if the voltage is too low, or replace the battery if it has failed. 2. Loose or oxidized battery terminals causing poor contact. The solution is to clean and tighten the battery connections. 3. A loose alternator belt or tensioner pulley. The solution is to replace the belt or adjust the tensioner. 4. Faulty alternator voltage regulator or excitation circuit. The solution is to troubleshoot the alternator.
4
1
Share

What are the differences between Toyota 86 and Supra?

Here are the differences between Toyota Supra and 86: 1. Power: The Toyota 86 is equipped with Subaru's 2.0L horizontally opposed engine, to which TOYOTA has added direct injection technology. When paired with a 6-speed manual transmission, it delivers a maximum power of 200PS/7000rpm and a maximum torque of 205Nm/6600rpm. In contrast, the Toyota Supra is powered by a 3.0-liter inline 6-cylinder twin-turbocharged engine. 2. Exterior: The design of the Toyota 86 comes from TOYOTA's European design center ED2 located in Nice, France. It evolved from the FT-HS concept car released by Toyota in 2007, so the styling of the 86 has some European influences. The Toyota Supra, on the other hand, incorporates design elements from the Toyota FT-86, FT-HS, and Lexus LFA in its appearance.
14
3
Share

What Causes the Ignition Delay in Magotan?

Here are the specific reasons for the ignition delay in Magotan: 1. Carbon deposits or dirty components: Carbon buildup on the throttle body can affect the sensing of the accelerator pedal and air intake, causing delayed or incorrect signals from the ECU, which may prevent the vehicle from starting. The fuel injector is prone to accumulating sticky deposits, which can obstruct normal fuel injection, leading to poor gasoline atomization and delayed ignition, resulting in difficulty starting the car. 2. Inappropriate oil viscosity: For example, in very low temperatures, high oil viscosity can slow down oil circulation, causing mechanical dry friction, making it difficult to start the vehicle. 3. Faulty carbon canister purge valve: Gasoline evaporation is particularly strong after exposure to sunlight, and a poorly sealed carbon canister valve can easily cause cylinder flooding (wet wall).
10
0
Share

How to Turn on the High Beam on a BMW?

To activate the high beam on a BMW: When the low beam is on, push the lever forward once to switch to high beam, and pull it back to return to low beam. The high beam is one of the essential functions in a car. Compared to the low beam, the high beam emits parallel light with concentrated and brighter illumination, allowing it to reach higher and farther objects, significantly aiding the driver's visibility at night. However, vehicles with high beams activated should switch to low beams at least 150 meters before encountering oncoming traffic. BMW's lineup includes models such as the BMW 3 Series, BMW 7 Series, BMW X5, BMW X1, and BMW 1 Series. Taking the BMW 3 Series as an example, its body dimensions are 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm, a fuel tank capacity of 59 liters, and tire specifications of 225/45R18.
10
3
Share

How Long Does It Take to Charge a BYD Song?

When charging the BYD Song, it takes a considerable amount of time to preheat the battery (to reach the set value) before entering the normal charging state. Using a household 220-volt power supply, a full charge takes approximately 9 hours at around 15 degrees. At a professional charging station, it takes between 15 minutes to half an hour. Here is more information about the BYD Song: 1. Exterior: The BYD Song features an X-shaped front grille, giving it a sporty appearance. The side profile incorporates hidden A/B/C pillars, creating a floating roof visual effect. 2. Powertrain: The BYD Song is equipped with a hybrid system consisting of a 1.5T engine and two electric motors, with one motor positioned at the front axle and the other at the rear axle, enabling all-wheel drive functionality. Additionally, the BYD Song has a pure electric range of 70km and can accelerate from 0-100km/h in 4.9 seconds.
2
0
Share

Should the Tensioner Pulley Be Replaced if It Makes Noise?

The tensioner pulley should be replaced as soon as possible if it makes noise. Here is some information about the tensioner pulley: 1. The tensioner pulley mainly consists of a fixed housing, tensioning arm, pulley body, torsion spring, rolling bearing, and spring bushing. It can automatically adjust the tension according to the tightness of the belt, ensuring the stability, safety, and reliability of the transmission system. 2. The tensioner pulley is a wear-prone component in automotive parts. Over time, the belt may stretch, and some tensioner pulleys can automatically adjust the belt tension. Additionally, the tensioner pulley makes the belt run more smoothly, reduces noise, and prevents slippage. 3. The function of the tensioner pulley is to adjust the tightness of the timing belt. It is generally replaced together with the timing belt to avoid future issues. Other parts do not need to be replaced as long as regular maintenance is performed.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.