Is the Expressway Free During Labor Day?

1 Answers
StLondyn
07/25/25 1:54pm
During Labor Day, the expressway is toll-free. The expressway is free during holidays, starting from 00:00 on May 1st and ending at 24:00 on May 5th. The vehicles eligible for free passage include passenger vehicles with 7 seats or fewer, as well as motorcycles traveling on regular toll roads. If you plan to use the expressway, here are some important points to note: 1. Check your vehicle's condition in advance, including tire wear and fuel levels; 2. Prepare some stimulating drinks or snacks to avoid drowsiness while driving. The national policy for toll-free expressway travel during holidays generally applies to four major national holidays: Spring Festival, Qingming Festival, National Day, and Labor Day. The specific dates are determined by the State Council's official announcements for the year.
Was this review help?
20
5
Share
More Forum Discussions

Will the Battery Be Damaged if the Electric Vehicle's Chassis Is Hit?

Whether the battery will be damaged depends on the situation. Generally, there is no issue. Minor collisions won't cause damage, but severe impacts can harm the battery. Chassis Vibration Damping: The engine and wheels are fixed to the vehicle's chassis, and vibrations can resonate with the floor at certain frequencies, causing discomfort. The underbody protection helps mitigate some of this resonance. Undercarriage Protection: The thickness of the underbody plastic coating can reach 1.5-2.5mm. When the underbody is scraped by road bumps, this coating helps reduce the impact on the chassis. Vehicle Undercarriage Impact: Undercarriage impact refers to the chassis encountering road bumps like stones while driving. Such impacts create a collision force between the vehicle's underbody and the obstacle, potentially damaging the impacted area of the electric vehicle's chassis to some extent.
8
2
Share

What Are the Types of Manual Transmission Failures?

Manual transmission failures can be categorized into the following types: 1. Transmission jumping out of gear: The gear lever automatically returns to the neutral position during acceleration, deceleration, climbing, or severe vibration. 2. Transmission gear confusion: When the clutch is fully disengaged, the gear cannot be engaged or disengaged; sometimes, attempting to engage one gear results in engaging another, or two gears are engaged simultaneously. 3. Difficult gear engagement: Despite the clutch being in good technical condition, gears cannot be smoothly engaged, often accompanied by gear grinding noises. 4. Transmission abnormal noise: The transmission emits unusual sounds such as dry grinding, knocking, or vibration during operation. Manual transmission troubleshooting methods: First, inspect the gear shift lever and remote control linkage system for any deformation, interference, or jamming, and check for loose connections. Examine the clearance at linkage joints; if the clearance between the ball joint and socket is excessive, replace them with new parts. Adjust the length of each linkage strictly according to the vehicle manufacturer's specifications.
14
4
Share

What is the difference between attending and not attending the vehicle damage assessment in person?

The difference is minimal. The vehicle owner does not need to attend the damage assessment in person. As all vehicle owners know, the damage assessment is a crucial step in the insurance claim process. Although the vehicle owner is not responsible for conducting the damage assessment, it does not mean that they should not understand the process. Being familiar with the damage assessment process can help avoid compensation losses due to one's own lack of knowledge. Additional information: The assessor visits the scene, takes photos of the accident, identifies the damaged parts of the vehicle, determines whether they should be replaced or repaired, and finally assesses the extent of the damage. However, a vehicle consists of thousands of parts, and the models and prices of different types of vehicle parts vary. Even professional assessors often face numerous challenges and feel overwhelmed due to insufficient information, which has become one of the key issues in the vehicle insurance industry.
1
3
Share

How Many Days Does It Take to Repair a Flooded Car?

Flooded cars generally take about a month to repair. Introduction to flooded cars: A flooded car refers to a vehicle that has been submerged in water, typically involving the engine and transmission being soaked, with the water level exceeding the wheels and body seats, and the bottom components of the vehicle being in prolonged contact with water. Such vehicles pose significant risks, as the electrical circuits are prone to short circuits and fires. Classification of flooded cars: Water level above the chassis is considered partial submersion; water level above the oil dipstick is considered half-submersion; water level above the hood and dashboard is considered complete submersion. Checking the electrical system: Flooded cars require inspection of the electrical circuits. If the circuits are functioning normally, the car can be started as usual.
16
3
Share

Why is the car door light not working?

The reasons why the car door light does not illuminate when the door is opened may include the following: 1. Switch malfunction. 2. Blown fuse. 3. Short circuit in the wiring. 4. Some cars require the door light to be turned on near the sunroof/reading light before the door light will illuminate when the door is opened or closed. 5. The door and door switch are not making contact. Additional relevant information is as follows: 1. Based on the number of doors, car models can be classified into two-door, three-door, four-door, and five-door vehicles. 2. Considering the car's purpose and passenger convenience, the door opening angle is typically set around 70 degrees. 3. Car lights include headlights, taillights, turn signals, etc. Headlights further consist of high beams, low beams, front turn signals, and width indicators.
14
5
Share

Can a Tire Be Repaired After Using Tire Sealant?

Tires that have used tire sealant can still be repaired. The working principle of automatic tire sealant is that when it is used, the sealant is injected into the tire through the valve stem. As the vehicle moves, centrifugal force causes the sealant to form a uniform protective film inside the tire. Advantages: When a vehicle's tire is leaking, simply injecting the tire sealant through the valve stem can seal the leak. The advantage lies in its convenience and speed, eliminating the need to remove and replace the spare tire. Disadvantages: However, it's important to note that tire sealant can affect the tire's dynamic balance. Therefore, after using tire sealant, the vehicle speed should not be too high. Additionally, vehicles equipped with tire pressure monitoring systems should avoid using tire sealant, as it may damage the tire pressure monitoring equipment.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.