Is the engine of the Honda Inspire the same as that of the Accord?

Is it necessary to install rain guards on cars?

It is necessary to install rain guards on cars. Car rain guards are divided into rearview mirror rain guards and window rain guards. Rearview mirror rain guards can mitigate the impact of rain on drivers by effectively preventing raindrops from falling onto the rearview mirrors. Most rearview mirror rain guards are attached above the rearview mirror cover using double-sided tape. They are particularly suitable and effective during light to moderate rain. Installing window rain guards allows you to open the windows slightly during rain, letting fresh air into the car while expelling stale air. On rainy days when you don't want to use the air conditioning, simply opening a small gap in the window can prevent fogging on the windshield surface inside the car.

19

1

Share

What are the domestic automobile brands in China?

China's domestic automobile brands include Geely, BYD, Hongqi, Lifan, and Great Wall, among others. Taking the BYD Han as an example, it is a mid-to-large-sized sedan under the BYD brand, featuring a 4-door, 5-seat sedan body structure. The vehicle dimensions are 4960mm in length, 1910mm in width, and 1495mm in height, with a wheelbase of 2920mm. In terms of power, the BYD Han is equipped with a 4-cylinder, 2.0T, 192-horsepower turbocharged engine. For the suspension system, it adopts a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.

20

1

Share

What is the fuel tank capacity of the Mazda3 Axela?

The Mazda3 Axela has a fuel tank capacity of 51 liters. This vehicle is a compact car under Changan Mazda, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. The vehicle comes with a warranty of 3 years or 100,000 kilometers. The Mazda3 Axela is equipped with a 4-cylinder, 1.5-liter, 117-horsepower naturally aspirated engine, paired with a 6-speed automatic manual transmission. Both the cylinder head and block are made of aluminum alloy. The suspension system consists of a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.

17

3

Share

How often should the coolant be replaced in a new car?

New cars typically require coolant replacement every 2 years or approximately 40,000 kilometers. Some luxury vehicles may have extended intervals, with coolant replacement cycles reaching up to 10 years or 200,000 kilometers. For vehicles that operate continuously for long periods, such as taxis, an annual replacement is sufficient. During regular car maintenance, you can check the coolant level - if it hasn't dropped below the minimum mark and the radiator temperature gauge shows normal readings, replacement isn't necessary. Before replacing the coolant, conduct a comprehensive inspection of the engine cooling system and air conditioning system for any coolant leaks. Drain the old coolant by opening the engine radiator drain valve and engine cylinder block drain valve. Properly dispose of the drained old coolant and avoid random disposal to prevent environmental pollution.

1

2

Share

What Are the Reasons for Difficulty in Starting a Car?

Reasons for difficulty in starting a car: 1. Weak ignition energy of spark plugs. If spark plugs are not replaced after their maintenance cycle, it will lead to a severe decrease in ignition energy. 2. Carbon buildup in the car, accompanied by slight shaking at idle. Cleaning the throttle, intake tract carbon buildup, and fuel injectors can solve the issue. 3. Battery depletion. Jump-starting the car or charging the battery can help. 4. Exhaust pipe blockage. 5. Insufficient fuel pressure in the low-pressure fuel system. The first attempt to start may fail as the low-pressure fuel system builds up pressure, but the second attempt should succeed. 6. Incorrect engine timing. If the engine timing is off, the engine will not start. This situation usually occurs after maintenance.

9

2

Share

How to Remove the Maintenance Reminder on a Polo?

Steps to remove the maintenance reminder on a Polo: 1. Turn off the vehicle; 2. Press and hold the right button below the instrument panel, then insert the key and turn it to the power-on position; 3. After turning the key to power-on, release the right button, and a small wrench icon will appear; 4. Once the small wrench icon appears, press the left button below the instrument panel once, and the small wrench will disappear. The Polo is a compact car under SAIC Volkswagen, featuring a 5-door, 5-seat hatchback body structure. Its dimensions are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. The suspension system combines a MacPherson strut independent suspension with a torsion beam non-independent suspension.

12

2

Share

Is the engine of the Honda Inspire the same as that of the Accord?

Is it necessary to install rain guards on cars?

What are the domestic automobile brands in China?

What is the fuel tank capacity of the Mazda3 Axela?

How often should the coolant be replaced in a new car?

What Are the Reasons for Difficulty in Starting a Car?

How to Remove the Maintenance Reminder on a Polo?

What brand are the tires on the Venucia D50?

What is the working principle of an exhaust gas turbocharger?

How to Properly Operate the Clutch Pedal?

Where is the car's thermostat located?