···
Log in / Register

Is the engine of the Geely New Emgrand a three-cylinder?

3 Answers
SanCarmen
08/27/25 2:05am
Geely New Emgrand does not use a three-cylinder engine. All models are equipped with a 1.5-liter naturally aspirated four-cylinder engine, delivering a maximum horsepower of 109 hp. In terms of fuel consumption, the MIIT comprehensive fuel consumption is approximately 5.8L. For the transmission, it is paired with a 5-speed manual or CVT continuously variable transmission. The Geely New Emgrand is a compact sedan produced by Geely Auto, with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height. In terms of exterior design, the car incorporates contemporary styling trends, exuding a dynamic and confident presence. The chrome trim on the trunk seamlessly integrates with the taillights, perfectly complementing the shield-shaped emblem, resulting in a sleek and robust overall design.
Was this review help?
14
2
Share
LaneAnn
09/08/25 8:52am
The new Geely Emgrand indeed uses a three-cylinder engine, such as the common 1.5-liter version. I've been driving this car for half a year since I switched to it, and I find it quite fuel-efficient overall. In the city, it only consumes a little over 6 liters per 100 kilometers, which is much better than my old car. Although some people complain that three-cylinder engines might vibrate more, in this Geely model, the suspension and engine design are well done, making the ride very smooth without any shaking during braking or acceleration. As a commuter car, it offers ample space, making it practical for family outings, and the rear seats are comfortable. Plus, it's affordable with low maintenance costs. The money I save on fuel each month can buy me a few extra cups of coffee. If I had to pick a flaw, there's a bit of noise during cold starts, but turning on some music easily covers it. Overall, it's suitable for families and daily commuting.
Was this review help?
1
0
Share
Expand All
Troy
10/23/25 2:12am
The Geely New Emgrand typically features a three-cylinder engine, especially the 1.5L model which I've driven multiple times. As an automotive enthusiast, I've analyzed its technical details: the three-cylinder design makes the engine lighter, improving fuel efficiency by approximately 20%, while the power delivery remains linear and well-matched with the CVT transmission. Geely has incorporated a balance shaft to minimize vibrations, and in real-world driving, you hardly feel any roughness. However, for long-term use, it's essential to pay attention to fuel quality and spark plug maintenance. This engine delivers ample torque, making suburban driving quite dynamic, and the electric power steering ensures nimble and smooth cornering. Three-cylinder engines offer advantages in terms of environmental friendliness and cost, but don't forget to regularly check the vehicle's condition to prevent aging issues. Overall, I'd recommend it to friends who value both economy and performance.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What are the reasons for no hot air coming out of the air conditioning heating?

There are several reasons why a car's air conditioning does not produce heat: 1. The vehicle has just started: The engine temperature has not yet risen, and it will work after the car warms up. 2. Insufficient coolant: A lack of coolant can also cause the car's air conditioning not to produce heat, and adding coolant will solve the issue. 3. Damaged water pump: This can lead to a failure in the coolant circulation system, causing the car's air conditioning not to produce heat, and replacing the water pump will fix it. 4. Clogged heater core or radiator: If hot water from the engine cannot circulate into the radiator, the air conditioning will not produce heat, and cleaning the heater core will resolve the problem. 5. Faulty radiator fan: If the radiator fan runs continuously, it will dissipate heat constantly, making it difficult for the coolant inside the radiator to warm up, leading to the air conditioning not producing heat. Inspecting and repairing the radiator fan will solve the issue.
19
2
Share

What is the battery model for a Skoda car key?

The battery model for a Skoda car key is CR2025. CR2025 is a lithium manganese dioxide battery, named according to the IEC standard. The naming convention is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - Indicates that the battery is cylindrical in shape; if it were square, F would be used instead; 20 - Indicates the battery diameter is 20mm; 25 - Represents the battery height is 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 140-170mAh. The shelf life of a CR2025 battery is typically 5 years. If the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly shorter. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further, up to 8 or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep groove and a shallow groove at the top of the smart key. The deep groove is the keyhole, while the shallow groove is used to open the battery cover. Insert the mechanical key into the shallow groove and pry it open with force to reveal the battery cover. Once opened, you will see the button battery, which can be easily removed with a gentle push. Step 3: Replace the battery. Install the new battery, then reattach the battery cover and mechanical key in sequence to complete the battery replacement.
16
4
Share

What is the function of the Anti-Slip Regulation (ASR)?

The function of the Anti-Slip Regulation (ASR) system is to control the slip within a certain range during vehicle acceleration, preventing the drive wheels from slipping excessively, thereby improving the directional stability and steering control capability of the vehicle during braking. The ASR system enhances traction and maintains the driving stability of the vehicle. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may experience fishtailing, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration. The principle is that when the computer detects a drive wheel slipping, it automatically reduces the engine's power output and applies braking to the slipping wheel until normal wheel rotation is restored. The role of ASR is to control the tire slip rate within a certain range during acceleration, preventing the drive wheels from losing power due to slipping or causing safety issues due to excessive power output. One of its functions is to improve traction, and the other is to maintain stable vehicle operation. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may fishtail, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration.
19
4
Share

Where is the Vehicle Identification Number?

Automobile identification code is an indispensable tool for identifying a vehicle. There are several ways to check it: 1. The vehicle VIN code is usually located at the lower left or lower right corner of the front windshield. 2. Check the car trunk or engine frame. 3. Check the vehicle's factory nameplate and certificate of conformity. 4. The vehicle VIN code can also be found on the car invoice, insurance policy, vehicle license, and registration certificate. Here is more information about the vehicle identification number: 1. The meaning of the vehicle identification code: The vehicle identification code is the ID number of the car, which is determined according to the national vehicle management standards and contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. 2. The composition of the vehicle identification code: The vehicle identification number should consist of three parts: the first part, the World Manufacturer Identifier (WMI); the second part, the Vehicle Descriptor Section (VDS); and the third part, the Vehicle Identifier Section (VIS).
5
4
Share

Which provinces allow motorcycles on highways?

Domestic provinces that allow motorcycles on highways include: Anhui, Heilongjiang, Guizhou, Hubei, Hunan, Jilin, and Liaoning. Although the "Road Traffic Safety Law of the People's Republic of China" does not prohibit motorcycles from using highways, some provinces explicitly ban them, such as Sichuan, Hainan, Fujian, Jiangsu, etc. Motorcycle riding precautions: 1. Helmet: Always wear a helmet when riding a motorcycle. Due to the unique nature of motorcycle riding, wearing a helmet is essential to prevent danger and ensure personal safety. Riders are encouraged to purchase high-quality helmets for guaranteed safety. 2. Lights: Motorcycle lights are also crucial. Before riding, check the lights and use them appropriately during the ride to ensure safety. 3. Tires: Tires play a vital role in ensuring safety during riding. Before riding, check the tire wear condition, regularly maintain tire pressure, and ensure the smoothness of the tire surface. If you notice the tread being punctured by a foreign object during the ride, do not remove it immediately, as doing so may cause faster air leakage. 4. Brakes: Motorcycle brakes determine rider safety. Before each trip, check the brake cables for any abnormalities. A simple method is to squeeze the brakes a few times.
12
5
Share

How to Use Rearview Mirrors When Driving?

Rearview mirrors are tools that allow drivers sitting in the driver's seat to directly obtain external information about the rear, sides, and lower parts of the vehicle. For the convenience of drivers, to prevent traffic safety accidents, and to ensure personal safety, all countries require that vehicles must be equipped with rearview mirrors, and all mirrors must be adjustable. The adjustment methods for rearview mirrors are as follows: 1. Adjustment of the left-side mirror: For the vertical position, place the distant horizon at the center, and for the horizontal position, adjust it so that the car body occupies 1/4 of the mirror's area. 2. Adjustment of the right-side mirror: Since the driver's seat is on the left, it is more difficult for the driver to grasp the situation on the right side of the car. Therefore, when adjusting the vertical position of the right-side mirror, the ground area should be larger, accounting for about 2/3 of the mirror's area, while the horizontal position is similarly adjusted so that the car body occupies 1/4 of the mirror's area. 3. Adjustment of the center mirror: Adjust the horizontal position to the left edge of the mirror, cutting to the right ear of your own image in the mirror. Generally, you cannot see yourself in the center rearview mirror, and for the vertical position, place the distant horizon at the center of the mirror.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.