Is the engine of the Changan Yuexiang V3 from Suzuki?

1 Answers
GavinRose
07/28/25 5:48pm
The engine of the Changan Yuexiang V3 is not from Suzuki; it uses an engine independently developed by Changan. Below are the relevant details about the Changan Yuexiang V3: 1. The Changan Yuexiang V3 is a compact sedan under the Changan brand, equipped with two engines: a 1.3L naturally aspirated engine and a 1.4L naturally aspirated engine. 2. The 1.3L naturally aspirated engine of the Changan Yuexiang V3 delivers 94 horsepower and a maximum torque of 121 Nm, with the maximum torque achieved between 4,000 to 5,000 rpm and the maximum power at 6,000 rpm. 3. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission. 4. The 1.4L naturally aspirated engine of the Changan Yuexiang V3 produces 101 horsepower and a maximum torque of 135 Nm, with the maximum torque achieved between 3,500 to 4,500 rpm and the maximum power at 6,000 rpm.
Was this review help?
14
1
Share
More Forum Discussions

How is the Blue Whale engine of Changan cars?

Blue Whale engine is not widely equipped in Changan models, only in Changan CS75PLUS, Changan CS35PLUS Blue Whale Edition, and Yidong Blue Whale Edition, etc. More relevant information is as follows: 1. Changan mainly focuses on small-displacement models, generally between 1.5 to 2.0. There are not many models with 2.0 power demand, so the installation rate of Blue Whale engine in Changan's model lineup is relatively low. 2. The development of Changan Blue Whale engine has broken away from the traditional reverse engineering path, adhering to independent research and development. After 6 years of effort at the Changan Engine R&D Center in the UK, the Blue Whale 2.0TGDI engine was successfully developed, breaking the technical monopoly of foreign companies and filling the gap in domestic development capabilities for 2.0L and above turbocharged direct injection engines.
5
4
Share

What causes the front wheels of a Corolla to make a clunking sound when going over bumps?

The reasons why the front wheels of a Corolla make a clunking sound when going over bumps are: 1. Failure of the bearing on the car's shock absorber plane; 2. Failure of the swing arm ball joint, with the lower swing arm ball joint becoming loose and having excessive clearance; 3. Aging of the front wheel shock absorber's buffer rubber; 4. Aging of plastic components, with the stabilizer bar rubber bushing becoming loose and having excessive clearance. Taking the Corolla Hybrid 2020 1.8L E-CVT Comfort Edition as an example: It is a compact 4-door 5-seater sedan under FAW Toyota, with a length, width, and height of 4635mm, 1775mm, and 1470mm respectively, a wheelbase of 2700mm, and a maximum engine torque of 142 Nm.
17
3
Share

How to replace the license plate bulb on a BYD F3?

The method to replace the license plate bulb on a BYD F3: Use a flat-head screwdriver to pry one end of the license plate bulb socket. If there is no movement, try prying the other end of the socket. Remove the old bulb and replace it with a new one. The license plate light is turned on at night or in dim lighting conditions along with the width indicator lights to illuminate the license plate. The BYD F3 is a model under BYD Auto, with body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. In terms of interior, the BYD F3 features a simple and elegant design with light-colored upholstery that gives a fresh feel. It comes with comprehensive and rich configurations, including leather seats and a reverse radar in higher-end models.
7
1
Share

How to adjust the clock on Nissan X-Trail's dashboard?

Nissan X-Trail dashboard clock adjustment method is as follows: 1. Press the setting button, select clock setting, and use the outer ring of the rotary button on the right side of the center color display to browse through the items. 2. Press the center of the button to confirm the selected setting, then rotate the button to adjust the setting for that item. 3. After setting, press the center of the button again until the color disappears, then repeat the above operation to adjust the next item. Here is more information: The small icons on the dashboard represent different meanings and can promptly reflect vehicle information, which is very important for car owners and should be fully understood and mastered. More and more car models are also replacing dials with digital displays, such as trip computers and LCD dashboards, which can display instantaneous fuel consumption, average fuel consumption, average speed, tire pressure, and fault warnings, making it easier for drivers to read and understand.
15
5
Share

What is the tutorial for replacing the battery in a Peugeot 2008?

The tutorial for replacing the battery in a Peugeot 2008 is as follows: Park the car and turn off the engine, open the engine compartment cover, locate the battery position, first remove the cable on the negative terminal of the battery, then remove the bracket that secures the battery, disconnect the positive terminal cable, remove the old battery, when installing the new battery, first connect the positive terminal cable, then connect the negative terminal cable, tighten the screws, and test the car after installation is complete. The Peugeot 2008 is a model under the Peugeot brand, with a body length, width, and height of 4159mm, 1829mm, and 1556mm respectively, and a wheelbase of 2538mm. The Peugeot 2008 is powered by a three-cylinder fuel direct injection gasoline engine, and also offers a diesel engine as an option.
8
0
Share

Why does the Audi steering wheel make abnormal noises?

Audi steering wheel makes abnormal noises for the following reasons: Friction between plastic parts: Especially in new cars, the steering wheel is composed of various plastic parts. If the mutual clearance is too small during steering, there will always be friction, which will wear off after a period of use. Friction between the steering column and floor mat: This is mainly because the aftermarket floor mat is too large and comes into direct contact with the steering column, causing friction as the steering column rotates. Failure of the clock spring in the steering wheel: This is due to a broken clock spring or an unplugged clock spring connector, which can be resolved by replacement or fixing. Aging of the steering tie rod end: Replace the steering tie rod end, but a four-wheel alignment is required after replacement.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.