Is the Engine of the Bestune T77 Domestic or Joint Venture?

2 Answers
JaydenLynn
09/08/25 6:28am
The engine of the Bestune T77 is domestically produced, independently developed by the FAW Group. Here are some details about this engine: 1. The Bestune T77 is equipped with only one model of engine across all variants, the CA4GA12TD, a 1.2T direct-injection turbocharged engine. 2. This turbocharged engine belongs to the 4GA series of high-performance engines, balancing high power and fuel efficiency. The engine's maximum net power/speed is 100kw/5500rpm, and the maximum net torque/speed is 204Nm/1600-4200rpm.
Was this review help?
19
5
Share
McWilliam
09/20/25 5:02am
My friend just picked up a Bestune T77 last week and specifically asked the 4S salesperson - this car's 1.5T engine is genuinely domestic! Independently developed by FAW, with both design and production completed at the Changchun base. Domestic engines have truly come into their own now, unlike a decade ago when we still relied on foreign technology. The Bestune T77's engine achieves a thermal efficiency of over 39%, with maximum horsepower of 169PS - overtaking in the city is effortless. Last week we took it on mountain roads - the turbo kicks in early, delivering peak torque at just 2000rpm, and the fuel consumption is only 7.8L, more economical than some joint-venture engines.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What happens to the speed when driving in 4th gear without pressing the accelerator?

When driving in 4th gear without pressing the accelerator, the vehicle's speed will gradually decrease. When the speed drops to idle level, the car body will shake increasingly violently and eventually stall. Under normal vehicle conditions, if the car can move without pressing the accelerator after shifting gears, it indicates that the idle speed is too high and should be adjusted to the normal range of 800 to 1200 RPM. Definition of idle state: It refers to an operating condition when the engine is running without load. When the accelerator pedal is completely released during engine operation, the engine enters idle state. When adjusting idle speed, the RPM should not fluctuate abruptly as it may cause premature engine wear. It's best to have it adjusted at an automotive repair facility. Manual transmission gear explanation: 1st gear: Normal starting, speed around 10 km/h; 2nd gear: Low-speed driving, speed around 20 km/h; 3rd gear: Used at speeds between 20-40 km/h, typically for urban driving; 4th gear: Used at speeds between 40-60 km/h; 5th gear: Used at speeds above 60 km/h; N gear: Neutral gear, used when idling while parked; R gear: Reverse gear, engaged when backing up the vehicle.
2
3
Share

Which is Better, 3.36 Speed Ratio or 3.7 Speed Ratio?

The 3.36 speed ratio offers better fuel efficiency at medium to high speeds. The 3.7 speed ratio provides greater torque. Below is a detailed introduction to automotive speed ratios: 1. Definition: The speed ratio (speed-ratio) refers to the gear transmission ratio of the main reducer in a vehicle's drive axle. It equals the ratio of the driveshaft's rotational angular velocity to the axle shaft's rotational angular velocity, and also equals the ratio of rotational speeds. 2. Speed Regulation Range: When using a mechanical reducer, the ratio of the motor's rated speed nN (r/min) to the reducer output shaft's speed nL is called the speed ratio I (also known as the transmission ratio), i=nN/nL. When other speed control methods are employed, such as variable frequency speed control or slip speed control, the ratio of the motor's maximum speed to its minimum speed is called the speed ratio, indicating the range of speed regulation.
10
3
Share

What does it mean when the EDC warning light comes on in an Iveco?

EDC fault refers to a problem in the electronic fuel injection system. When this fault occurs, it is necessary to go to a 4S shop or professional repair shop for handling. Here are the relevant introductions: 1. Iveco: Iveco is the abbreviation of Nanjing Iveco Automobile Co., Ltd., a joint venture established by China's Nanjing Automobile Group and Italy's Fiat Group Iveco Company. It is not only the largest cooperation project between the Chinese and Italian governments, but also the most successful example of overseas cooperation since the birth of the Fiat Group one hundred years ago. 2. EDC: EDC stands for Electric-Diesel-Control, representing the electronic control system for diesel injection. An EDC fault refers to a problem in the high-pressure electronic injection and electronic control system, which can be understood as a type of engine fault. Specialized computer diagnostics are required for inspection and analysis.
2
0
Share

How often should gear oil be changed?

Gear oil should generally be changed every 40,000 kilometers. Below are the specific details about gear oil: 1. Composition: Gear oil is primarily made from petroleum-based lubricating base oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an important type of lubricating oil. 2. Function: It is used in various gear transmission devices to prevent tooth surface wear, scratches, sintering, etc., thereby extending their service life and improving power transmission efficiency. 3. Characteristics: Gear oil should possess excellent anti-wear and load-bearing properties, as well as appropriate viscosity. Additionally, it should have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention capabilities.
19
4
Share

What are the methods to deal with tree sap penetrating car paint?

Methods to remove tree sap from car paint include: 1. Soaking and wiping with warm water: Soak a cleaning cloth in warm water, cover the area with tree sap, wait for a while until the sap melts, and then wipe it off. 2. Soaking and wiping with alcohol solvent: High-concentration liquor can be used, which works well for some cases. Alcohol can dissolve and remove tree sap, but the effectiveness may vary. 3. Wiping with soapy water solution: Many car owners report good results using ordinary soapy water to clean tree sap, as it is simple and convenient. 4. Wiping with car cleaning clay: Car cleaning clay, a high-density gel-like substance, is considered a magic tool for car cleaning. It not only has strong cleaning power but also provides a certain polishing effect, making it worth a try. However, this method is generally suitable for small-scale cleaning, as large-scale cleaning can be quite labor-intensive.
4
0
Share

Can the inner film of the windshield be peeled off?

The inner film of the windshield can be peeled off. Here are some precautions to consider: 1. Note 1: After peeling off the film, generally use detergent water and a blade to remove the residue. You can also use a steel wool pad with detergent water, but make sure to use a brand-new steel wool pad. 2. Note 2: Nowadays, most front windshields come with defogging heating wires. If you directly use a blade or steel wool pad for cleaning, it may damage these heating wires, causing the rear windshield to lose its defogging function. For cleaning windshields with defogging heating wires, you can use hot water mixed with detergent and a slightly rough cloth or a cloth used for cleaning car interiors, cleaning it slowly.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.