Is the Elantra CVT transmission equipped with a steel belt or a chain?

1 Answers
VonNova
07/25/25 10:45am
Elantra CVT transmission uses a chain. The following is a related introduction about the transmission: 1. Manual-automatic transmission: A transmission form that integrates both manual shifting and automatic shifting modes. 2. Continuously Variable Transmission (CVT): The biggest difference between a CVT and a common automatic transmission lies in their structure. An automatic transmission shifts between gears without steps, while a CVT can achieve stepless shifting throughout the entire process, making speed changes smoother without the "jolt" feeling typical of traditional automatic transmissions during gear shifts. It can balance both the car's fuel economy and power performance, matching the transmission ratio within the engine's optimal speed range.
Was this review help?
9
2
Share
More Forum Discussions

What are the symptoms of a worn front stabilizer bar bushing?

Symptoms of a worn front stabilizer bar bushing include: abnormal noises such as clunking or squeaking during driving and braking, which occur when passing over bumps or uneven roads—not a collision sound, but rather the noise of rubber being compressed. In the second stage, the chassis may produce dull thudding or rattling sounds, resembling blunt objects colliding with each other, noticeably louder than the "thump" sound of the suspension. The stabilizer bar bushings are designed to be installed on the lower control arms of both front wheels, controlling the overall symmetry of the front wheels. Their primary functions are to manage the front wheels' camber angle, maintain the tracking ability of the steering wheels, prevent excessive lateral roll during turns, improve ride smoothness, enhance the overall rigidity of the chassis frame, and increase driving stability.
17
5
Share

Will the 4S shop polish after painting?

Yes, polishing is performed because after painting, the paint surface may exhibit very fine particles, marks, and other imperfections. Therefore, 4S shops typically use polishing compounds to polish the surface, which enhances the brightness and texture of the paint. Below is relevant information: Introduction to Car Polishing: Car polishing is a step in the car detailing process, performed before waxing, sealing, or coating to prepare the car's surface. Polishing, especially fine polishing, is essential for achieving a mirror-like finish before applying sealants or coatings. Functions of Car Polishing: It is used to reduce the surface roughness of the car, resulting in a bright and smooth surface. It removes the oxidation layer on the paint surface, shallow scratches, and issues like paint dullness caused by oxidation, thus improving the overall appearance of the paint.
16
1
Share

What is the displacement of the Dragon Water Suction?

The Dragon Water Suction comes in various models and power levels, categorized into vertical type, high-altitude type, and letter-separation type. Different models are further divided into displacements of 1000, 1500, 3000, and 5000. The most common large displacement model is the 3000-ton per hour variant. More details are as follows: Inventor: The Dragon Water Suction drainage vehicle was invented by Lin Zhiguo, the general manager of Fujian Qiaolong Special Vehicle Co., Ltd. Currently, the product line includes 5 major categories, totaling 8 models of drainage vehicles. Technical Core: No external power source or electrical facilities are required; the vehicle is powered by its own drainage system to drive the pump. It is self-propelled and can climb 35-degree slopes or stairs. The walking speed is 2 kilometers per hour. The hydraulic-driven pump has a flow rate of 1000 m3/h and a head of 22m.
6
1
Share

What does grinding off the serial number on a vehicle mean?

Grinding off the serial number on a vehicle refers to the practice of selling cars through unofficial channels or across regions, where the vehicle identification number (VIN) is intentionally removed to avoid accountability for cross-regional sales by the manufacturer. Additional information: Generally, purchasing from reputable stores ensures genuine products with qualified quality and craftsmanship, and the store will provide its own warranty. However, there is still a possibility of encountering defective or counterfeit products. The main difference lies in whether the warranty is honored, as large authorized dealers often only provide warranties for vehicles sold locally. If you have basic knowledge of vehicle maintenance and repair, opting for a car with a ground-off serial number might be a viable choice. If consumers purchase a product with a ground-off serial number, they can request the manufacturer to provide a quality certification for the product, and the manufacturer should issue the corresponding certification.
17
3
Share

Why does the car shake after starting?

The reasons for car shaking after starting: 1. Low ignition energy: As the vehicle's usage time extends, the spark plug's ignition gap tends to increase, resulting in reduced ignition energy, causing the car to shake; 2. Carbon deposits on valves and intake passages: Carbon deposits absorb some fuel, leading to ECU judgment errors, insufficient fuel entering the cylinders, resulting in insufficient power output and shaking; 3. Incorrect mixture ratio: Normally, the oxygen sensor operates at around 370 degrees Celsius, but a newly started car cannot reach the required temperature for the oxygen sensor to function, causing it to be inactive. This leads to errors in controlling the air-fuel mixture and ignition timing, resulting in a completely chaotic mixture ratio and vehicle shaking; 4. Varying cylinder conditions: After prolonged use of the engine, the ignition gaps and timing control of the spark plugs in each cylinder can vary, causing reduced power output and shaking.
10
4
Share

What is the bulb model for a 125cc motorcycle headlight?

125cc motorcycle headlight bulb model is X9-H4. Below is relevant information about motorcycle headlights: Function: Motorcycle headlights primarily serve lighting and signaling purposes. The light emitted illuminates the road conditions ahead of the vehicle, enabling safe nighttime riding. Classification: Motorcycle headlights can be categorized by light source into: halogen-tungsten lamps and xenon lamps. Halogen lamps produce light through tungsten filaments, with low lumens, insufficient brightness, high power consumption, and a lifespan of only 600 hours. Application: Motorcycle headlights (high beam, low beam) are used during nighttime and foggy conditions to clearly see vehicles and pedestrians ahead while riding. However, when meeting oncoming traffic, the low beam should be used to avoid affecting the other party's visibility and causing collisions.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.