···
Log in / Register

Is the EA211 spark plug not suitable for double platinum?

1 Answers
DeGage
07/29/25 4:21pm
EA211 spark plugs cannot use double platinum. Spark plugs, commonly known as sparkers, function by discharging the pulsed high voltage electricity delivered by the high-tension leads, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. The following is an introduction to spark plugs: 1. Main types: The main types include standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs, among others. 2. Function: The purpose of a spark plug is to introduce tens of thousands of volts of high voltage into the combustion chamber and generate an electric spark to ignite the air-fuel mixture. Working in conjunction with the ignition system and fuel supply system, it enables the engine to perform work, collectively determining the engine's performance to a large extent. The electrodes of the spark plug repeatedly and continuously generate ignition sparks to ignite the air-fuel mixture in the cylinder. Meanwhile, other parts of the ignition system generate timed high-voltage pulses, forming sparks and creating explosions to provide the energy required for the engine's power output.
Was this review help?
2
3
Share
More Forum Discussions

Focus Headlight Model?

Ford Focus headlight assembly low beam model is H7, power 55W; high beam model is H1, power 55W. More information about car headlights is as follows: 1. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of a car. They not only relate to the external image of a car owner but are also closely connected to safe driving at night or under bad weather conditions. 2. Car headlights are located at the front of the car, mainly serving for illumination and signaling purposes, and their daily use and maintenance should not be overlooked. The light emitted by car headlights can illuminate the road conditions in front of the vehicle body, enabling drivers to drive safely at night.
15
3
Share

How to set up one-touch window lift for Venucia T70?

To set up the one-touch window lift function for Venucia T70, take out the plastic pry tool from the small box with a red arrow lock in the car door slot, then connect to the main unit for setup. Below is some introduction about one-touch window lift: 1. The one-touch window lift function in cars refers to pressing the switch to automatically raise the window to the top, or lower it to the bottom. The window lifter can prevent forgetful car owners from having items stolen due to forgetting to close the windows. 2. The one-touch window lift function is achieved through a window lifter, which comes in three types, including time-controlled, program-controlled intelligent window closing systems.
6
2
Share

What does the Mercedes-Benz C gear mean?

Mercedes-Benz C gear is the switch button between Comfort C mode and Sport S mode, and pressing it will be displayed on the central console screen. The following are some introductions about C mode and S mode: 1. C mode: It starts in 2nd gear, and the car's transmission control module will shift to a higher gear at low RPM, with less shifting impact, providing better comfort and fuel efficiency. 2. S mode: It starts in 1st gear, and the transmission control module will automatically choose the maximum torque output RPM for shifting, which is around 4000 RPM, delivering greater torque and speed.
4
4
Share

Where is the MINI cabin air filter located?

MINI cabin air filter is located behind the glove box (storage compartment) on the passenger side. If you need to replace the MINI cabin air filter, here are the steps: 1. Properly remove the glove box: Locate the screws securing the glove box to the dashboard around its perimeter and unscrew them one by one. 2. Locate the cabin air filter: After removing the glove box, find the cabin air filter, which is generally positioned at the lower left side. Carefully remove it once located. 3. Replace the cabin air filter: After taking out the old filter, install the new cabin air filter. Note: Be sure to purchase genuine cabin air filters from authorized channels, as genuine filters will have manufacturing dates marked on them.
14
1
Share

Does the Jetta VS5 have front and rear anti-collision beams?

Jetta VS5 has front and rear anti-collision beams. The front anti-collision beam is located behind the foam layer of the front bumper, while the rear anti-collision beam does not have foam, which serves an energy-absorbing function. Here is some information about the front and rear anti-collision beams: 1. The anti-collision beam is not actually meant to 'prevent collisions'; its main function is to transmit force. 2. When the vehicle is hit from the front or rear, if the force is applied to the anti-collision beam, the beam can transfer the impact force to the parts where it connects to the vehicle body—usually the beam and the longitudinal beams (sometimes the rear body underframe in the case of the rear). Between the beam and the longitudinal beams, there is typically a small energy-absorbing box structure.
16
4
Share

What is the driving principle of the Accord Hybrid?

Accord Hybrid driving principle: The 2.0-liter gasoline engine drives the generator to produce electricity, which is then used for the electric motor. At this time, the vehicle is driven solely by the electric motor. Here are some introductions about the Accord Hybrid drive: 1. The Accord hybrid system has three driving modes: pure electric, hybrid, and internal combustion engine drive. 2. In electric mode, the motor obtains energy from the lithium battery pack and drives the vehicle alone, with a maximum speed of 60 mph. The maximum driving range is not high. Once the battery energy is exhausted, it automatically switches to hybrid mode.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.