Is the driver's license renewal valid for 90 days before and after?

1 Answers
MaryLynn
07/30/25 5:29am
No, the motor vehicle driver should apply for renewal at the vehicle management office of the driver's license issuing place within 90 days before the expiration of the motor vehicle driver's license. When applying, the "Motor Vehicle Driver's License Application Form" should be filled out. If the driver's license has been expired for less than one year, the driver can renew it at any time. Renewal process: The motor vehicle driver should bring the required materials to the vehicle management office of the driver's license issuing place to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Penalties for expired driver's license: Driving a motor vehicle is not allowed during the expiration period, otherwise it can be treated as driving without a license. If the driver's license has been expired for less than one year, although the driver can renew it at any time, driving on the road will result in a fine of 200 yuan. If the driver's license has been expired for more than one year without renewal, the traffic management department will cancel it according to the law. If the expiration period is less than three years, the driver must retake and pass the subject one exam to restore the driving qualification. Driving on the road during this period will result in a fine ranging from 200 yuan to 2000 yuan. If the driver's license has been expired for more than three years, the driver's license will be completely canceled. The driver must retake the driver's license exam to drive again. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2000 yuan and administrative detention for up to 15 days.
Was this review help?
4
5
Share
More Forum Discussions

Will an Engine Temperature of 120 Degrees Cause Cylinder Scoring?

An engine temperature of 120 degrees can cause cylinder scoring. The normal engine temperature is 90 degrees, and 120 degrees is considered high. It is important to monitor whether the temperature continues to rise while driving. If the temperature keeps increasing, it is best to pull over and call for roadside assistance. The following situations can cause an engine to overheat: 1. Insufficient coolant: Coolant leaks or low coolant levels can cause the engine temperature to rise. In such cases, check the coolant level and top it up if necessary. After a few days, recheck the level to see if it has dropped significantly. If it has, locate the source of the leak. 2. Faulty cooling fan: A malfunctioning cooling fan can prevent heat from being effectively transferred to the coolant, leading to overheating and potential boiling. 3. Faulty water pump: Issues with the water pump, such as seized bearings or damaged impellers, can slow down coolant circulation, resulting in engine overheating. Common problems include cracked impellers or impellers coming loose from the pump shaft.
19
2
Share

Where is the cabin air filter located in the Mercedes-Benz GLA200?

It is located on the right side under the front hood, inside the battery cover. Here is some relevant information about the Mercedes-Benz GLA: 1. Powertrain: The 1.6T Dynamic model is equipped with a four-cylinder engine (model 270910) producing a maximum of 156 horsepower and 115 kW power. The engine reaches its peak power at 5,300 rpm and delivers a maximum torque of 250 N·m between 1,250-4,000 rpm, featuring direct fuel injection technology. In terms of actual performance, the 1.6T engine provides adequate power for city driving (though naturally not comparable to a 2.0T). Deep throttle inputs yield rapid acceleration with strong push-back sensation. 2. Fuel consumption: Combined cycle fuel consumption averages approximately 9L/100km. Highway driving at constant speeds reduces consumption to around 7L/100km. Urban consumption varies by traffic conditions, typically 8-9L/100km. Winter cold starts and summer AC usage can increase consumption beyond 10L/100km.
17
1
Share

Where to Register a New Car?

New cars should be registered at the local vehicle management office. Below is relevant information about new car registration: 1. Obtain the vehicle certificate of conformity: The vehicle certificate of conformity is crucial as it is required for registration. Currently, some car 4S stores delay handing over the certificate, which may postpone the registration process. Therefore, it is important to obtain the certificate as soon as possible by communicating frequently with the 4S store. 2. Keep the triplicate purchase invoice: After purchasing the car, the 4S store will issue a triplicate purchase invoice, which will be needed for subsequent registration procedures. The invoice consists of red, yellow, and blue copies. Generally, the red and yellow copies are submitted, while the yellow copy is kept for personal records. 3. Pay the vehicle purchase tax and obtain the tax payment certificate: After purchasing the vehicle, the vehicle purchase tax should be paid as soon as possible, usually at the nearest vehicle management office. Once the tax is paid successfully, the tax payment certificate (both original and duplicate) will be issued. 4. Prepare various documents in advance: Have the original ID card and copies (make several copies for backup) ready. Non-local residents must provide the original and copies of their temporary residence permit.
15
3
Share

What is the fuel consumption of the Hongqi H5 1.5T?

The fuel consumption of the Hongqi H5 1.5T is 7.5 liters. Below is a detailed introduction about the Hongqi H5: 1. Overview: The Hongqi H5 is a mid-size sedan under the Hongqi brand, with a wheelbase of 2875 mm, and length, width, and height of 4945 mm, 1845 mm, and 1470 mm respectively. The Hongqi H5 is a four-door sedan. The fuel consumption for the 1.5T model is 7.5 liters per 100 km, while the 1.8T model consumes 9.8 liters per 100 km. 2. Powertrain: The 1.5-liter turbocharged engine of the Hongqi H5 delivers 169 horsepower and a maximum torque of 258 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head, paired with a 7-speed dual-clutch transmission. The 1.8-liter turbocharged engine produces 197 horsepower and a maximum torque of 320 Nm.
18
4
Share

What are the advantages of MacPherson suspension?

MacPherson suspension offers excellent responsiveness and handling. This suspension system features a simple structure, compact size, reduced unsprung mass, quick response, low manufacturing cost, easy arrangement for the engine and steering system, compatibility with various springs, and the capability to achieve automatic body height adjustment. Key points are as follows: 1. It is a crucial component: MacPherson suspension serves as an essential part that elastically connects the frame and axle. Its structure and performance parameters directly impact the vehicle's ride comfort and handling stability. As one of the most popular independent suspensions today, it is commonly used for the front wheels of passenger cars. It is a vital component of the vehicle's safety structure, where driving performance and comfort have always been closely related to the suspension system in the chassis structure. The simplicity or complexity of the suspension structure also directly determines the manufacturing cost of the vehicle. 2. Widespread market application: MacPherson independent suspension is one of many suspension systems, winning broad market application due to its simple structure, low cost, and acceptable comfort.
17
2
Share

What does 'lo' mean in a car?

In a car, 'lo' stands for low. 'Lo' appears on the temperature control knob of the car's air conditioning control panel. Turning the knob towards 'lo' lowers the temperature. The method for using the air conditioning is as follows: 1. Press the one-touch start button to start the vehicle; 2. Press the 'AC' option to activate the air conditioning system; 3. Press the 'lo' or 'gr' indicators to adjust the temperature; 4. Adjust the digital display to set the fan speed. Additional relevant information is as follows: The working principle of the air conditioning system involves the compressor inhaling low-temperature, low-pressure refrigerant gas from the outlet of the evaporator, compressing it into high-temperature, high-pressure gas, which is then discharged from the compressor. The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where, due to the reduction in pressure and temperature, the refrigerant gas condenses into a liquid, releasing a significant amount of heat.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.