Is the driver's license photo one inch or two inches?

1 Answers
May
07/30/25 8:29am
The driver's license photo is one inch. Requirements for the photo when applying for a motor vehicle driver's license: a straight-edged, front-facing, bareheaded, color photo of the applicant taken within the last 6 months, showing a single person's upper body. The background color should be white; red clothing is not allowed (as it affects the stamping), women should not wear earrings, photos with shawls or draped hair are not allowed during photography, men's hair should not be too long, the headshot should be clear, with rich layers and a natural expression. Below are the classifications of driver's licenses: 1. A1 driver's license: Allows driving large buses and A3, B1, B2, C1, C2, C3, C4, M. 2. A2 driver's license: Allows driving tractors and B1, B2, C1, C2, C3, C4, M. 3. A3 driver's license: Allows driving city buses and C1, C2, C3, C4. 4. B1 driver's license: Allows driving medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to buses with fewer than 19 seats, such as minibuses or vans).
Was this review help?
10
3
Share
More Forum Discussions

What transmission does the Buick Excelle use?

Buick Excelle uses a 6-speed automatic manual transmission. Below are the functions and maintenance tips for the automatic manual transmission: Functions of the automatic manual transmission: The automatic manual transmission is a transmission device that combines manual and automatic shifting functions. It improves the fuel efficiency and controllability of the automatic transmission, allowing the driver to regain control over shift timing, which is usually determined by the computer. This enhances driving operability and enriches the driver's experience. Maintenance tips for the transmission: Regularly check whether the automatic transmission fluid level is normal and add automatic transmission protectant to the transmission. For older vehicles, it is recommended to add a bottle of automatic transmission leak stopper to restore the aging of transmission seals. Also, be aware of the replacement cycle for automatic transmission fluid.
1
4
Share

What is the oil specification for the Volkswagen Lavida?

Volkswagen Lavida uses fully synthetic 5W40 engine oil with a capacity of 5 liters, and the replacement interval is 10,000 kilometers. Below is extended information about engine oil: Precautions for oil change: Before changing the oil, the engine should be turned off for half an hour to allow excess oil to flow back from the cylinder walls to the oil pan, ensuring complete drainage. Different types of oil should not be mixed. If switching from premium to regular oil, the original oil must be completely drained and the lubrication system thoroughly cleaned before adding new oil. Oil selection method: Engine oil should be selected according to the engine's requirements. If the engine is in good condition and the seasonal temperature is low, lower viscosity oil should be used to ensure smooth oil flow. During high-temperature seasons or when the engine is severely worn, higher viscosity oil is preferable as it helps form a protective oil film and reduces engine wear.
7
5
Share

What is the fuel consumption of the Ford Mondeo 1.5t?

The fuel consumption of the Ford Mondeo 1.5t is 8.5 liters per 100 kilometers. The following are the reasons for high car fuel consumption and fuel-saving methods: Reasons for high car fuel consumption: Long warm-up periods, which can easily produce more carbon deposits, and the engine will inject more fuel to maintain operation at low temperatures; long-term short-distance driving; carrying heavy objects in the car for a long time; low tire pressure; frequent aggressive driving; driving with windows open at high speeds; driving in too low or too high gears. Fuel-saving methods: Avoid slamming the accelerator when starting, smooth acceleration and steady driving are the most fuel-efficient; observe the road conditions ahead in congested areas to avoid sudden braking, which not only saves fuel but also reduces vehicle wear; regularly clean the trunk; avoid coasting in neutral.
11
2
Share

How to Adjust the Clutch Pedal Height?

Clutch pedal height adjustment can be done using the following methods: 1. Locate the clutch master cylinder behind the clutch pedal and remove it first. 2. There is a notch on the push rod; insert a small wrench into the notch to rotate the push rod. 3. Use another wrench to loosen the positioning nut on the push rod. After loosening the nut, adjust the positioning nut to the very end of the thread, then you can rotate the push rod. 4. When operating inside the car, use the wrench to rotate continuously; the push rod will gradually become shorter, then tighten the positioning nut. Clutch height adjustment mainly involves the clutch control part. Mechanical clutches allow height adjustment, which can be achieved by adjusting the tightness of the clutch cable. Hydraulic clutches do not allow height adjustment.
12
3
Share

What is the difference between car primer and topcoat?

The car primer and topcoat have the following differences: 1. The main components of car primer and topcoat are different. The primer consists of four parts: resin, solvent, filler, and additives. 2. The topcoat is composed of three parts: resin, solvent, and additives. The main difference from the primer is that the topcoat has very little or no filler added, and their functions are also different. Below is an introduction to primer and topcoat: 1. The function of the topcoat: It has scratch resistance, gloss hardness, transparency, hand feel, aging resistance, and yellowing resistance. These are mainly reflected in the topcoat, and the quality of the topcoat directly affects the quality of the entire paint film. 2. The function of the primer is as follows: It fills the capillary pores in the steel plate, making it easy to apply paint on the surface, ensuring that the topcoat can tightly adhere to the car's surface. The primer contains a lot of powder material, which provides thickness to the paint.
15
3
Share

What does Prado 2ndstrt mean?

Prado 2ndstrt means starting in second gear. The following is a related introduction to starting in second gear: The function of starting in second gear: After turning on this switch, the automatic transmission starts in second gear. Its main function is to be used on slippery roads to prevent the high torque of first gear from causing wheel spin, similar to the function of TRC (Traction Control). The hazards of starting in second gear: The main hazards of starting in second gear: The biggest damage is to the clutch disc, as the wear is most severe in the semi-clutch state; it wastes fuel because increasing the throttle in the semi-clutch state causes much of the fuel to only make the engine idle without converting into forward motion; it is prone to stalling and carbon buildup. If the throttle is not increased sufficiently during startup, it can lead to insufficient power, resulting in incomplete combustion, carbon buildup, and even engine knocking.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.