Is the Dongfeng Junfeng e11k a pure electric vehicle?

1 Answers
SanEmma
07/29/25 5:50am
Dongfeng Junfeng e11k is a pure electric vehicle, a single-motor compact sedan. The maximum power of this car's motor is 100kw, and the maximum torque is 260 Nm. The car uses a ternary lithium battery, and the range given by the Ministry of Industry and Information Technology is 405 kilometers. The body dimensions of the Dongfeng Junfeng e11k are 4665mm in length, 1700mm in width, and 1540mm in height, with a wheelbase of 2700mm. The door structure is a 4-door, 5-seater sedan with a trunk volume of 504 liters. The driving method is front-engine front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
Was this review help?
5
0
Share
More Forum Discussions

Will the insurance company compensate if the vehicle is flooded in heavy rain?

Insurance companies will compensate for partial losses if the vehicle is flooded in heavy rain. Compensable parts: Rescue costs, cleaning costs, electrical losses, and interior component damages caused by vehicle flooding are all covered under the auto damage insurance policy, and the insurance company should provide compensation. Non-compensable parts: During the insurance period, the insurer is responsible for compensating for the insured vehicle's losses caused by collision, overturning, fire, explosion, falling objects, collapse, lightning, storm, tornado, heavy rain, flood, ground collapse, ice collapse, cliff collapse, avalanche, hail, mudslide, landslide, etc., according to the terms of the insurance contract.
19
0
Share

Can Engine Oils with Different Viscosities Be Mixed?

Engine oils with different viscosities should not be mixed. Relevant information is as follows: Principle: If two engine oils with different viscosities are mixed, although the lubricating properties remain unchanged, the composition of the oil will change. Mixing them can degrade the performance of the oil and may even cause damage to the engine. Therefore, it is not recommended to mix engine oils with different viscosities. Function: Engine oil serves to lubricate and reduce friction in the engine. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricating oil, determining its basic properties, while the additives compensate for and improve any deficiencies in the base oil's performance, making them an essential part of the lubricating oil.
8
1
Share

Is It Easier to Pass the Subject 2 Driving Test on a Rainy Day?

The pass rate for the Subject 2 driving test on a rainy day is generally lower compared to taking the test on a dry day. Reasons why it's harder to pass the Subject 2 test on a rainy day: During rainy conditions, the vehicle's rearview mirrors can easily become blurred, affecting the driver's ability to align with reference points and lines during the test. Precautions for taking the Subject 2 test on a rainy day: Candidates can slightly roll down the windows to get a clearer view of the ground markings. Those who have tissues can wipe off the water droplets from both rearview mirrors before getting into the car, but should never do so after entering the vehicle. Additionally, turn on the windshield wipers promptly when it rains, adjusting the wiper speed according to the intensity of the rain to maintain clear visibility.
4
4
Share

Can You Turn Right from Two Right-Turn Lanes When the Red Light is On?

If both are circular red signals and they are on simultaneously, you can make a right turn provided that you do not obstruct the passage of released vehicles or pedestrians. However, if one of them is a lane signal light, you must wait until the right arrow turns green before making a right turn. Motor vehicle signal lights and non-motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. Lane signal lights indicate: When the green arrow light is on, vehicles in the lane are permitted to proceed in the indicated direction. When the red cross-shaped light or arrow light is on, vehicles in the lane are prohibited from proceeding.
16
5
Share

Why Can't Front-Wheel Drive Cars Achieve a 0-60 mph Time Under 5 Seconds?

Because the car cannot be started for an extended period during ignition, which serves as a protection measure for both the starter motor and the battery. Prolonged operation of the starter motor can cause overheating, while excessive discharge from the battery can lead to battery depletion. Therefore, the car's ignition process is designed to be completed in a very short time. Advantages of Front-Wheel Drive Cars: Excellent handling with more agile vehicle response during turns. Additionally, they offer superior acceleration performance from a standstill and high comfort levels. During starting, accelerating, or climbing, the vehicle's center of gravity shifts backward, enhancing the traction of the rear wheels as the driving wheels, which facilitates better starting, acceleration, or hill climbing, providing improved driving stability and comfort. Disadvantages of Front-Wheel Drive Cars: Higher manufacturing costs and less convenient space utilization. During turns, if the rear wheels rotate faster than the front wheels, it can lead to oversteer, commonly referred to as "tail sliding."
2
3
Share

Why does the car stall when only stepping on the brake without pressing the clutch?

Because when only stepping on the brake without pressing the clutch, the power transmission of the car will encounter resistance from the locked wheels. Due to the reaction force, the car is bound to stall. Under different driving conditions, the clutch and brake have different coordination methods, as follows: Coordination during car starting: First, shift the gear to 1st gear, then release the handbrake, and slowly lift the clutch pedal. During the process of lifting the clutch pedal, when you feel the car body shaking, gently press the accelerator pedal to add fuel. At this time, slowly release the clutch pedal, and the car will complete the starting process. Coordination during car deceleration: If the speed is relatively fast, you can directly step on the brake pedal without pressing the clutch pedal. If the vehicle needs to decelerate to a stop, press the clutch pedal to the bottom first and then step on the brake to prevent the vehicle from stalling suddenly. Coordination when the car is turning: When turning, first step on the brake to slow down the car. After the turn, if there are no obstacles, there is no need to press the clutch; release the brake and step on the accelerator to speed up. If there is an obstacle right after the turn, press the clutch again, shift to a lower gear, and slow down.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.