Is the Discovery Sport an aluminum body?

Can the Mercedes-Benz GLC be upgraded with the 2020 model's original large screen?

It can be upgraded, but the modification is technically challenging. It is recommended to have it done at a 4S shop. Below is more information about the central control panel: 1. Introduction: The central control screen, also known as the car's onboard computer, is an automotive information product designed for the special operating environment of vehicles, featuring resistance to high temperatures, dust, and vibrations, as well as integration with the car's electrical system. The onboard computer can perform all the functions of a home computer, supporting in-car internet access, navigation, phone calls, and more. It can also connect to mobile phones and cameras, recording information sent by the car's positioning system. 2. Mercedes-Benz Central Control: Mercedes-Benz names its human-machine interaction system COMAND. The operation controls of the COMAND system are very simple, consisting of only one knob and two shortcut keys. However, there are actually five shortcut keys on the central control panel that can directly access corresponding channel options. The advantage of the COMAND system lies in its extremely simple and intuitive interface, with five main submenu options displayed on almost any screen, allowing quick access to desired functions.

13

0

Share

Where is the sunroof drain outlet of the Mercedes-Benz GLK?

The sunroof drain holes of the Mercedes-Benz GLK are located at the four corners of the sunroof, and rainwater is discharged from the A-pillar and C-pillar positions of the car. The maintenance methods for the sunroof are as follows: 1. Talcum powder cleaning: Fine talcum powder can be used for regular cleaning, which can extend the service life of the sealing ring. The moving parts of the sunroof are made of low-maintenance materials, and the mechanical parts should be cleaned regularly with engine oil or lubricant. It is recommended to clean them every two months. 2. Remove sand particles: After prolonged use of the sunroof, a significant amount of sand particles may accumulate in its sliding tracks and gaps. If not removed regularly, these particles can wear out the sunroof components. The sliding tracks should be cleaned frequently to prevent sand particle accumulation and extend the service life of the sunroof sealing ring. Generally, after 2 to 3 months of use, the sealing rubber strips or sliding tracks can be cleaned with gauze soaked in cleaning water. After wiping them dry, apply a small amount of engine oil or butter.

4

5

Share

Will I be penalized for crossing a solid line when the car in front breaks down?

In fact, in such a situation, it is permissible to cross the solid line, but we should pay attention to the following requirements. First, we need to confirm whether the car in front has encountered an accident and cannot move for a while. If so, we can proceed to cross the solid line. When changing lanes, we must avoid forcing our way in and should yield to vehicles in the original lane before proceeding with the lane change. If the car in front breaks down at an intersection, the vehicle behind crossing the solid line will not be penalized, as this constitutes an act of emergency avoidance. If the lane change is performed under the direction of a traffic police officer, there will be no penalty either. According to Article 21 of the "Procedures for the Handling of Road Traffic Safety Violations," if any of the following circumstances are verified, the recorded traffic violation information captured by traffic monitoring devices or entered into the traffic violation management system shall be expunged: (1) Emergency vehicles such as police cars, fire trucks, ambulances, and engineering rescue vehicles performing urgent tasks; (2) Violations occurring during the period when the vehicle was stolen; (3) There is evidence that the violation was caused by rescuing people in distress or emergency avoidance; (4) The situation has already been handled by traffic police on-site; (5) Violations caused by inconsistent traffic signal indications; (6) Violations that do not meet the requirements specified in Article 18 of these procedures; (7) Incorrect recording of the vehicle's license plate information; (8) Violations recorded against a legitimate vehicle due to the use of forged, altered, or another vehicle's license plate; (9) Other circumstances that warrant expungement. Provided it does not obstruct other vehicles, you may borrow the lane. If you are captured by the camera and have objections, you can file an appeal or apply for administrative reconsideration to the higher-level traffic bureau. Vehicle owners can bring their driver's license and Peony Card to the traffic enforcement station at the location of the violation to print the penalty decision. If there are objections to the penalty, within 60 days from the date of receiving the penalty decision, they can apply for administrative reconsideration to the higher-level authority or the people's government at the same level, or file an administrative lawsuit within three months.

15

5

Share

Will the Car Shake If the Spark Plugs Are Not Tightened Properly?

If the spark plugs are not tightened properly, the car will shake. Therefore, when replacing spark plugs, the torque applied should be based on the required torque for the specific spark plug being used. Different sizes of spark plugs require different levels of torque. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover. Spark plug replacement intervals: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the owner's manual. The following standards can be used as a reference for maintenance and replacement: Platinum spark plugs should be replaced every 40,000 kilometers, standard nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers.

20

2

Share

What are the trunk dimensions of the Mercedes-Benz GLC?

The trunk depth of the Mercedes-Benz GLC300 ranges from 920-1920mm, with a height of 750mm and width of 1100mm, offering a maximum volume of 1600L. The Mercedes-Benz GLC is positioned as a midsize SUV in the market, featuring a 5-door, 5-seat layout. Its official body dimensions are 4764/1898/1642mm (length/width/height), with a wheelbase of 2973mm. In terms of product positioning, the Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz, essentially serving as the coupe version of the GLK. Additionally, the GLC offers 4Matic all-wheel drive. Regarding power output, the GLC delivers maximum power outputs of 135 kW, 155 kW, and 180 kW respectively. Its integrated control system features a touchpad and dynamic drive selector, including functions like Distance Pilot for automatic following. With three different power calibrations, it enhances wading depth and off-road capability by 100mm and 50mm respectively. The powertrain options include multiple configurations. For gasoline engines, it offers 1.8T, 2.0T, and 3.0L V6 variants. The interior of the new GLC L continues the current design, adopting a similar layout to the C-Class - featuring classic twin-tube instrument clusters with red needles and target-pattern backgrounds. The minimalist wood-grain center console pairs with a 3-color adjustable ambient lighting system, complemented by an 8.4-inch high-resolution color display and 13.97cm multifunctional instrument screen. It also integrates COMAND-Online, LINGUATRONIC voice control, Mercedes-me connectivity, and smartphone integration systems.

6

4

Share

What is the tire pressure range for the Honda XR-V?

The normal tire pressure range for the Honda XR-V is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Honda XR-V does not have a tire pressure monitoring button. This vehicle uses a passive tire pressure monitoring system, which does not display or allow access to specific tire pressure values. Only when the tire pressure is abnormal will an icon appear on the dashboard to alert the driver. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of various parts of the tire, leading to abnormal overheating due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; significantly increases friction between the tire and the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it will trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new part.

4

1

Share

Is the Discovery Sport an aluminum body?

Can the Mercedes-Benz GLC be upgraded with the 2020 model's original large screen?

Where is the sunroof drain outlet of the Mercedes-Benz GLK?

Will I be penalized for crossing a solid line when the car in front breaks down?

Will the Car Shake If the Spark Plugs Are Not Tightened Properly?

What are the trunk dimensions of the Mercedes-Benz GLC?

What is the tire pressure range for the Honda XR-V?

What is the insurance company's standard for scrapping flood-damaged vehicles?

How many kilometers can a Mercedes-Benz GLC run on a full tank of fuel?

Is it advisable to buy a car that has had issues with the shock absorber package?

What is the difference between Shaanxi AF and Shaanxi AD?