Is the Difficulty of Subject 2 Driving Test Greater on Rainy Days?

1 Answers
Benjamin
07/30/25 5:32am
Taking the Subject 2 driving test on a rainy day can have certain impacts, such as reduced visibility and slippery roads. However, don't worry too much, as the invigilators will assist by wiping the windows while you drive, minimizing the interference caused by the rain. Precautions for taking the Subject 2 test on rainy days: 1. Maintain a good mindset: When encountering rainy conditions during the test, avoid negative emotions or excessive nervousness. Candidates must adjust their mindset and stay optimistic. 2. Pre-test preparations: Rain can blur the side mirrors, so candidates should wipe them clean before getting into the car to ensure clear visibility during the test. Also, shake off any mud or water from your shoes to prevent slipping when operating the pedals. On rainy days, wheels are prone to skidding. Therefore, candidates should control their speed during the test, driving slower than during regular practice.
Was this review help?
18
0
Share
More Forum Discussions

Should the turn signal be used when stopping during Subject 3 of the driving test?

Yes, the turn signal should be used when stopping during Subject 3 of the driving test. Here are the scenarios when the turn signal is required: 1. Pulling over to park: The turn signal must be used when starting because you need to change lanes to alert vehicles behind you. 2. Temporary stop: First, check the left, right, and rearview mirrors to ensure there are no vehicles behind you. Then, turn on the right turn signal, honk the horn, and slowly steer to the right to park while gradually applying the brakes. When the speed is almost zero, quickly press the clutch, shift to neutral, engage the handbrake, release the left and right feet, and the stop is complete. 3. Restarting: Press the clutch, shift to first gear, turn on the left turn signal, honk the horn, and check the left, right, and rearview mirrors. Slowly release the clutch until the car slightly vibrates, then release the brake to start moving forward. Gradually press the accelerator, continue releasing the clutch until fully released, and shift gears to accelerate once the speed increases.
15
1
Share

How to Break in a New Car on the Highway?

Here are the techniques for breaking in an automatic transmission new car on the highway: 1. Maintain Load: Keep the car under a certain load, meaning you can carry a few passengers or some cargo. 2. Detailed Operation: Most automatic transmission cars are equipped with manual mode. If you have enough experience, it's best to start in manual mode. Switch from automatic to manual mode to let the car run for a while. When breaking in on the highway with an automatic transmission, initially use manual mode to push through the gears one by one. After running approximately 20 kilometers, switch back to D mode. You will clearly feel that the D mode's automatic gear shifting is completely different from before, and the car's power will also increase. After switching to D mode, run another 20 kilometers. At that point, the car can be considered properly broken in on the highway, and you can distinctly feel the difference. 3. Effect: Once the car is properly broken in on the highway and the fuel injector's atomization is optimized, the vehicle will become very fuel-efficient.
8
5
Share

What is the difference between OEM parts and aftermarket parts?

Here are the differences between aftermarket parts and OEM parts: 1. OEM parts: OEM parts refer to auto parts produced by manufacturers directly authorized by the automobile manufacturer. Both the products and packaging uniformly use the automobile manufacturer's trademark logo, and the packaging will indicate product parameters and the manufacturer's contact information. It's important to note that OEM parts are only circulated within the automobile manufacturer's own sales system, such as the manufacturer's brand 4S stores or directly authorized dealers. 2. Aftermarket parts: Aftermarket parts refer to auto parts produced by manufacturers not authorized by the automobile manufacturer. Both the products and packaging uniformly use the automobile manufacturer's trademark logo, and the packaging will indicate product parameters and the manufacturer's contact information. It's important to note that OEM parts are only circulated within the automobile manufacturer's own sales system, such as the manufacturer's brand 4S stores or directly authorized dealers.
8
1
Share

Which Lane to Turn Into in Subject 3?

In Subject 3, turn into the left lane. Key precautions and gear shifting techniques for turning in Subject 3: 1. Pay attention to traffic light changes: No need to stop for circular green lights when turning right, but must stop and wait if there's a red right-turn arrow. 2. Yield to pedestrians: Give way to straight-moving vehicles, and yield to left-turning vehicles when turning right. 3. Maintain proper head movements during turns and ensure correct gear selection - shift from 1st to 2nd gear during left turns. 4. Navigate turns within 2nd gear: For right turns without red lights or vehicles ahead, complete the turn in 2nd gear; if there are vehicles ahead or after waiting, use 1st gear. 5. Common turning mistakes: Failing to decelerate/downshift (preferably to 1st or 2nd gear), improper left/right observations, incorrect gear selection, and choosing wrong lanes.
9
3
Share

What do the terms 'rated capacity' and 'actual load' mean in Subject 4?

Actual load refers to the real number of passengers or cargo being carried. Rated capacity indicates the maximum permitted number of passengers or cargo allowed. Below are specific details about Subject 4: 1. Exam Content: Subject 4, also known as the Safe and Civilized Driving Knowledge Test, covers safe driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling procedures. 2. Retake Policy: If you fail Subject 4, you don't need to retake previously passed subjects. You can schedule a retake on your own without paying additional fees. Currently, there are no scheduling restrictions for the Safe and Civilized Driving Theory Test. However, the driving skill test permit is valid for three years. If the applicant fails to complete all required tests within this period, the passed subject results will become invalid.
1
2
Share

Can You Still Drive When the Tire Pressure Warning Light Comes On?

The flashing tire pressure warning light indicates that you should not continue driving and should promptly visit a maintenance facility for inspection. The tire pressure monitoring system automatically checks tire pressure in real-time while driving and alerts you to air leaks or low pressure to ensure driving safety. There are generally three reasons for abnormal tire pressure alerts: Abnormal Tire Pressure: The system typically triggers an alert when pressure falls below 1.8 bar or exceeds 3.0 bar. In this case, tire inspection and pressure adjustment are required. Unreset Tire Pressure Monitoring: If the system isn't reset after inflating the tires, it continues to display previously recorded data, causing the warning light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged Tire Pressure Sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving (e.g., by impact), the warning light will activate. Sensor damage necessitates replacement with a new component.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.