Is the Cruze a four-cylinder engine?

1 Answers
DiMariana
07/24/25 5:54am
The Cruze is not a four-cylinder engine, but a three-cylinder engine. The entry-level model of the Cruze is equipped with a 1.0T engine with a maximum power of 125 horsepower. The high-end model of the Cruze is equipped with a three-cylinder 1.3T engine, which has a maximum power of 163 horsepower. Depending on the model, it is paired with a manual, 6AT, or 7-speed dual-clutch transmission. The Cruze's 1.0-liter turbocharged three-cylinder engine has a maximum power of 92kw and a maximum torque of 170 Nm. This engine can deliver maximum power at 5,600 rpm and maximum torque between 2,000 and 4,000 rpm. It is also equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
15
5
Share
More Forum Discussions

What are the symptoms of a faulty throttle body?

The symptoms of a faulty throttle body are: 1. Unstable engine idle speed, with high idle speed persisting without dropping; 2. Difficulty in starting the engine; 3. Insufficient engine power, poor acceleration performance, and unstable operation; 4. Black smoke coming from the car's exhaust pipe; 5. The engine fault light is on. The car throttle body is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. The method to clean the throttle body is: 1. Turn off the ignition switch and disconnect the negative terminal of the battery; 2. Remove the throttle cable, intake hose, and the screws fixing the throttle body in sequence; 3. Use a cleaning agent to clean the throttle body, and use a cotton thread to wipe areas that are hard to reach.
3
4
Share

Can a Manual Transmission Car Skip Gears When Downshifting?

Manual transmission cars can skip gears when downshifting. However, there are several points to note when shifting gears in a manual transmission: 1. Accurately grasp the vehicle's speed and engine RPM during acceleration and gear shifting to avoid body shaking, prolonging the shifting time, or even stalling; 2. When downshifting from a higher gear to a lower gear, ensure the speed is reduced to an appropriate level before shifting; 3. When upshifting from a lower gear to a higher gear, shift sequentially without skipping gears to prevent prolonging the gear engagement time, which could degrade the car's power performance and accelerate synchronizer wear. A manual transmission, or manual gearbox, operates by changing the transmission ratio of meshing gears through the gear shift fork, thereby altering the driving torque to suit different operating conditions.
19
2
Share

How to Remove a Beam Wiper Blade?

Beam wiper blade removal method is: 1. Lift the wiper cover and raise the wiper perpendicular to the windshield; 2. Slightly change the angle of the wiper blade with force to lift and remove it. The function of the wiper is: to brush off raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. Wiper maintenance methods are: 1. When using the wiper to remove dust from the windshield surface on sunny days, spray glass cleaner and avoid dry wiping; 2. Manually clean other stubborn, hard dirt on the glass; 3. When lifting the wiper blade, hold the spine of the blade and gently place it back; 4. In winter, use an ice scraper to remove ice debris from the windshield surface first; 5. Repair wiper malfunctions as early as possible.
15
1
Share

How often should the transmission fluid be changed for a BMW 3 Series?

For a BMW 3 Series, the transmission fluid should be changed approximately every 2 years or 60,000 kilometers. There are two methods for changing the transmission fluid: gravity drainage and machine-assisted fluid exchange. Taking the 2021 BMW 320i as an example, it is a mid-sized 4-door, 5-seater sedan with the following dimensions: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and a fuel tank capacity of 59 liters. The 2021 BMW 320i is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 115 kW and a maximum torque of 250 Nm. It features rear-wheel drive, with a double-joint spring strut front suspension and a multi-link independent rear suspension.
14
2
Share

How to Deal with Rust on the Focus Front Axle?

Ford Focus front axle rust treatment methods are: 1. Go to a repair shop for removal; 2. Perform anti-rust treatment. The Ford Focus is a compact 4-door, 5-seater sedan with body dimensions of: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, and a fuel tank capacity of 53 liters. The Focus is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 153 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using torsion beam non-independent suspension.
16
5
Share

What are the differences between Audi Q5 and Q5L?

The differences between Audi Q5 and Q5L are: 1. Different power: The Audi Q5 is equipped with a 2.0T turbocharged engine, with a maximum power of 169 kW and a maximum torque of 350 Nm; the Audi Q5L is equipped with a 2.0T turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. 2. Different transmissions: The Audi Q5 uses an 8-speed automatic transmission; the Audi Q5L uses a 7-speed dual-clutch transmission. 3. Different four-wheel drive systems: The Audi Q5 uses full-time four-wheel drive; the Audi Q5L uses on-demand four-wheel drive. 4. Different body dimensions: The Audi Q5 has a body size of 4629mm in length, 1898mm in width, 1655mm in height, and a wheelbase of 2807mm; the Audi Q5L has a body size of 4753mm in length, 1893mm in width, 1659mm in height, and a wheelbase of 2908mm.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.