Is the Corolla engine domestically produced or imported?

How Often Should the Engine Belt Be Replaced?

For ordinary vehicles, the engine belt needs to be replaced after one and a half to two years of use. Alternatively, if the mileage reaches 60,000 kilometers, the belt can also be replaced. The belt is a crucial part of the engine's valve timing system. It connects to the crankshaft and ensures accurate intake and exhaust timing through certain transmission mechanisms. Belts are preferred over gears due to their low noise, precise transmission, minimal dimensional changes, and ease of compensation. Therefore, regular belt replacement is essential. Hazards of not replacing the belt: Belt failure usually occurs due to cracks or aging, causing the belt to become stiff. Without maintenance, the belt may lose teeth, leading to timing belt slippage in the engine. In severe cases, the belt may break entirely. If the belt breaks, its inertia causes the camshaft to continue rotating freely, resulting in misalignment between the piston and valve movements. This misalignment can cause continuous collisions, potentially damaging both components severely.

17

3

Share

Can the 360-degree Panoramic View Be Kept On All the Time?

360-degree panoramic view can be kept on all the time. The following is the relevant introduction about 360-degree panoramic view: Background of Demand: With the rapid development of computer technology, the types included in multimedia are increasing, and the effects that can be presented are also increasing. Some more traditional presentation methods are increasingly unable to meet the requirements of most customers for display methods. In traditional presentation methods, the means of display are nothing more than static flat images, dynamic videos, and display through three-dimensional panoramas. Static images can only provide a certain angle of the scene, and even with a wide-angle lens, it is not possible to effectively and comprehensively represent the scene; while dynamic videos can give users a comprehensive understanding of the scene, the image perspective is still limited, and the viewing method depends on the photographer's shooting method, which is not free. The method of three-dimensional modeling can solve the problems existing in both static images and dynamic videos, but the cost is high, and the authenticity is not always satisfactory. Therefore, when it is necessary to present a scene in a true, comprehensive, and intuitive way, 360-degree panoramic view is undoubtedly the best choice. Industry Applications: 360-degree panoramic technology provides unique methods for recording phenomena, discovering patterns, and predicting results. The application fields involved include human-computer interaction, geographic information, engineering management, environmental simulation, medical diagnosis, agricultural management, etc.

7

5

Share

Is Tire Pressure Monitoring Mandatory to Install?

Tire pressure monitoring is mandatory to install. The following are potential hazards caused by abnormal tire pressure: Reduced braking performance: Excessive tire pressure decreases the contact area between the tire tread and the ground, reducing friction and extending braking distance. Increased fuel consumption: Insufficient tire pressure increases the contact area between the tire tread and the ground, raising friction and resistance, which leads to higher fuel consumption. Shortened tire lifespan: Excessive tire pressure causes over-wear in the center of the tread, while insufficient pressure leads to over-wear on both sides of the tread. Both scenarios result in premature tire failure. Tire blowouts: According to a report by the National Highway Traffic Safety Administration (NHTSA), tire pressure 25% below the standard value triples the likelihood of a blowout, while pressure 25% above the standard value doubles the risk.

20

5

Share

Clicking Sound When Shifting Automatic Transmission?

Automatic transmission makes a clicking sound when shifting, which can occur under the following circumstances: 1. Generator gear issue. The symptom is a clicking sound when shifting to D or R gear while pressing the brake, but no sound when shifting to N gear. There is no abnormal noise while driving. Solution: Replace the generator. 2. Large valve clearance and poor lubrication when the engine is cold. The symptom is a clicking sound when shifting during the transition from cold to warm engine state, lasting about 3 minutes. This is normal and requires no action. 3. Parking on a slope by shifting to P gear first and then applying the handbrake. On a slope, due to inertia, there is an "external force." If P gear is engaged first, it bears the force, and the vehicle's weight is entirely on the P gear, resulting in a clicking sound when shifting. If the handbrake is applied first, the handbrake bears the force, and no clicking sound occurs. 4. Shifting while the vehicle is not fully stopped. This operation not only causes abnormal noise but also significantly shortens the transmission's lifespan.

7

3

Share

What is the total number of cars in China?

As of September 2018, the total number of motor vehicles in China reached 322 million, including 235 million cars. The following is relevant information about car ownership: Definition: Car ownership (car-parc) refers to the number of vehicles in a region, usually referring to vehicles registered locally. However, car ownership is different from motor vehicle ownership, as the latter includes motorcycles, agricultural vehicles, etc. Problems caused by the increase in car ownership: Although China's car ownership per thousand people is still less than half of the world average, the traffic congestion and air pollution caused by the rapid increase in the number of cars have reached a very serious level. Almost all major cities suffer from severe traffic congestion, and before National Day, Beijing repeatedly experienced unprecedented traffic jams. Air pollution caused by vehicle exhaust emissions has become the main source of pollution in many large cities.

1

4

Share

What is the difference between service brake and parking brake?

Service brake and parking brake have the following differences: Working principle: The parking brake refers to the handbrake, while emergency braking is mainly distinguished from anticipatory braking, which means taking immediate braking measures when an emergency is detected to stop the vehicle in the shortest possible time. Engine braking refers to using the engine's drag force to implement braking, such as when going downhill for a long distance. If the brakes are applied for too long, the brake pads may burn out. In such cases, you can shift to a lower gear and coast at idle speed, using the engine's drag force to control the vehicle's speed. Usage scenarios: The brake is the braking system. Brakes are divided into service brakes (foot brake) and parking brakes (handbrake). During driving, the service brake (foot brake) is generally used to slow down or stop the vehicle while moving forward, not just to keep the car stationary. The parking brake is used only when the service brake fails. When the vehicle comes to a complete stop, the parking brake (handbrake) should be applied to prevent the vehicle from sliding forward or rolling backward.

1

0

Share

Is the Corolla engine domestically produced or imported?

How Often Should the Engine Belt Be Replaced?

Can the 360-degree Panoramic View Be Kept On All the Time?

Is Tire Pressure Monitoring Mandatory to Install?

Clicking Sound When Shifting Automatic Transmission?

What is the total number of cars in China?

What is the difference between service brake and parking brake?

How to Solve Blackened Spark Plugs?

When will the VF11 be launched?

What to Do When the Tire Pressure Monitoring Light Comes On?

Can the Haval F5 be started remotely?