Is the Corolla 1.2T Engine Durable?

When is the first maintenance for Volkswagen?

Volkswagen's first maintenance is due at around six months or 4,000 to 5,000 kilometers. Relevant information about the first car maintenance is as follows: Precautions for the first car maintenance: The period before the first maintenance of a new car is called the break-in period. During the break-in period, since the gears of the engine, transmission, etc. have not fully smoothed out, generally, you should not drive too fast, absolutely do not exceed 100 km/h, and it's best not to exceed 80 km/h. If the vehicle is properly broken in during this period, there will be fewer problems in the future, and it will also be more fuel-efficient. Introduction to the first maintenance inspection content: The first maintenance inspection includes checking whether the engine oil and oil filter need to be replaced, and cleaning the air filter; checking whether the car's coolant level is normal; inspecting the car's brakes and whether there are any scratches on the chassis components; checking whether the power steering fluid level is normal and if there are any oil leaks at the oil pipe connections; examining the condition of the generator, air conditioning, water pump, and the aging and tension of the belts; and checking the tire pressure and wear condition.

18

4

Share

What Are the Reasons for No Power or Response When Inserting the Car Key?

The reasons for no response when inserting and starting the car key include a depleted car battery or issues with the ignition system. First, you need to check the car battery. The specific method is to use an external power source to jump-start the car. If the car can start through jump-starting, it indicates that the battery is depleted, and you will need to charge the battery or replace it. You should also inspect the car's ignition system to see if there is power in the live wire entering the ignition switch. If there is power, it means the ignition switch is functioning normally; if there is no power, it indicates a faulty ignition switch. Additionally, a locked steering wheel can also prevent the car from starting. In this case, place one hand on the steering wheel and use the other hand to turn the car key back and forth. The car should start quickly, and this situation is not a fault and does not require repair. Electrical circuit issues can also cause the car to fail to start. Common faults include blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.

7

5

Share

What are the effects of scratched rims?

If the rim is only superficially scratched, there are no safety concerns; however, if the edge is scratched and deformed, it can cause the rim and tire to not fit tightly, leading to slow air leakage and affecting safety. The rim is the rotating part of the wheel that connects the tire's inner contour to the hub through spokes, which is the metal component mounted on the axle that supports the tire. The function of the rim is to bear the rigid rotational inertia between the car and the tire, as well as to provide braking force. Currently, the commonly used rims in cars are steel rims and alloy rims. Scratched rims can be repaired depending on the severity of the damage. The repair method is as follows: clean the rim thoroughly to remove dirt; apply paint and oil, and you can use masking tape around the scratched area to prevent accidental application to other parts; after the rim is completely dry, use waterproof paper soaked in soapy water to wipe, polish with a buffing machine, and apply wax. If the rim is severely scratched with obvious deformation or damage, it cannot be repaired and should be replaced directly. When replacing a rim, first ensure the size matches. On one hand, it must be installable, and on the other hand, it should not affect the vehicle's speedometer and odometer. Secondly, pay attention to the manufacturing process of the rim. Generally, forged rims have better rigidity and are lighter in weight, preventing being deceived by sellers with cast rims.

1

4

Share

How long does it take to schedule an exam after submitting driver's license photo application?

Exam scheduling depends on the specific appointment time. The exam has no relation to submitting the driver's license photo, as the photo is only used for the final driver's license. Methods and tips for scheduling driving tests: Open the "Traffic Management 12123" mobile app and enter the homepage. After accessing the main interface, click "More" to enter the service center. Find and click "Driver's License Services," then locate "Exam Appointment" in the "Driver's License Services" section. Follow the app's step-by-step guidance to complete the exam scheduling. During scheduling, you can opt for the "System Allocation Mode," which may improve your chances of securing a test slot, though the exam session and time won't be fixed. Avoid selecting crowded test centers; instead, choose remote locations, as they are relatively easier to book. Driving test process: After enrolling at a driving school, the vehicle management office will review your file, which typically takes 5-7 days before you can schedule the Theory Test (Subject 1). Ten days after passing Subject 1, you can book the Subject 2 test. Approximately 30 days after passing Subject 2, you can schedule the Subject 3 road test. In most regions, you can take the Subject 3 theory test on the same day after completing the road test. Upon passing, you'll receive your license immediately. Therefore, the fastest time to obtain a license is about 40 days.

6

0

Share

Where is the oil drain plug located?

The oil drain plug is typically located on the oil pan. The steps for changing engine oil are as follows: 1. Run the engine until it reaches operating temperature. Then use a jack to lift the vehicle, engage the parking brake, and secure the front wheels with wheel chocks. 2. Place an old oil container beneath the oil pan: Locate the oil drain plug on the oil pan, slowly unscrew it, and allow the oil to drain completely (be careful not to touch the hot oil). 3. Move the oil container under the oil filter: Use an oil filter wrench to loosen the filter, then remove it by hand. If the filter is still hot, remember to wear gloves. 4. Refer to the user manual to select the appropriate oil filter. 5. Apply new oil to the gasket of the new filter: If the filter is installed vertically, you can pour some new oil into it to reduce dry starts during the next engine startup. Hand-tighten the filter and then tighten it further as specified (usually an additional 3/4 turn after hand-tightening). 6. Pour new oil into the oil pan: Refer to the user manual for specifications. Use a funnel to avoid spilling oil on the engine exterior. Check for leaks underneath the engine. If there are no leaks, lower the vehicle, check the oil dipstick, and start the engine. The dashboard warning light should turn off immediately. Finally, turn off the engine and recheck the oil level. Dispose of the used oil and filter according to local regulations.

11

1

Share

How Long Does It Take to Repair a Car Breakdown?

Car breakdowns require varying repair times depending on the specific issue, ranging from a dozen minutes to several hours—there is no fixed duration. A breakdown refers to any situation where a vehicle becomes unable to continue driving due to a malfunction on the road, such as a flat tire, oil leak, dead battery preventing startup, etc. If your car breaks down on the road, you can call your auto insurance provider for assistance. Most insurers offer free towing services within 100 kilometers of urban areas. Beyond this distance or for additional services, fees may apply. Generally, standard insurance does not cover breakdowns unless they result from a claimable accident. For instance, insurers won’t compensate for issues like a dead battery, flat tire, or running out of fuel. However, if the breakdown occurs due to a collision caused by a tire blowout or mechanical failure—rendering the vehicle inoperable—it may qualify for insurance coverage. Steps to handle a roadside breakdown: Shift the gear to neutral, push the car to the far-right side of the road to avoid obstructing traffic; after moving the vehicle, place a warning triangle at the required distance (50 meters on city roads, 150 meters on highways); then call your insurer to await rescue.

12

2

Share

Is the Corolla 1.2T Engine Durable?

When is the first maintenance for Volkswagen?

What Are the Reasons for No Power or Response When Inserting the Car Key?

What are the effects of scratched rims?

How long does it take to schedule an exam after submitting driver's license photo application?

Where is the oil drain plug located?

How Long Does It Take to Repair a Car Breakdown?

Where is the Headlight Fuse Located?

Is It Serious If a Car Is Flooded Up to the Gear Shift?

Should the Transmission Filter Be Replaced?

How Many Years Does a Toyota NiMH Battery Last?