Is the Continental CC6 Tire Not Wear-Resistant?

1 Answers
LeGeorge
07/25/25 1:30pm
Among comfort and quiet tires, the Continental CC6 tire is quite wear-resistant. The relevant explanations are as follows: 1. Reason: The Continental CC6 is a comfort and quiet-type tire with a wear resistance index of 380. Although there is a gap compared to tires that focus on wear resistance, the Continental CC6 tire is quite wear-resistant among comfort and quiet-type tires. The lifespan of the Continental CC6 tire is generally 3-5 years, or 40,000-60,000 kilometers. However, the service life of the tire is also greatly related to the driver's driving habits and the road conditions. 2. Additional Notes: The CC6 tread features a special design, with its connotation and technological innovations surpassing the previous generation product CC5. The CC6 is a new choice for owners who prioritize a comfortable driving experience and family outings. The developers have defined this tire as ultra-quiet and ultra-comfortable, with significant improvements in handling performance and durability compared to the CC5.
Was this review help?
8
3
Share
More Forum Discussions

What are the differences between SAIC Volkswagen and FAW Volkswagen?

The following are the differences between SAIC Volkswagen and FAW Volkswagen: 1. Establishment time: SAIC Volkswagen was established earlier than FAW Volkswagen. SAIC Volkswagen was established as a joint venture in 1985, while FAW Volkswagen was established in 1991. 2. Vehicle design: SAIC's vehicle design is more oriented towards mature consumers, with configurations that are also conventional. In contrast, FAW Volkswagen's Bora and Magotan B8L clearly show that the design tends to be more youthful and sporty. 3. Models produced: FAW Volkswagen mainly produces Audi, Jetta, Golf, Bora, Sagitar, and Magotan, while SAIC Volkswagen mainly produces Santana, Passat, POLO, Lavida, Tiguan, Octavia, and Superb.
18
4
Share

What happens if the engine air filter is not replaced?

If the air filter is not replaced for a long time, it will accumulate dust and other debris, which will affect and obstruct the flow of air in and out, thereby also affecting the engine's air intake. For detailed information, please see below: 1. The disadvantages of not replacing the air filter for a long time: Prolonged failure to replace it will impact the engine and increase fuel consumption. The correct replacement interval for an air filter is approximately 20,000 kilometers, but it can also be adjusted based on different cities. The maintenance cycle at a 4S shop is generally 10,000 kilometers or 8,000 kilometers, so it can be considered to replace it every two cycles. 2. Regional factors: For vehicles in the northwest region, due to reasons like dust, air quality can change significantly. If you frequently drive during this period, earlier replacement is necessary. Besides dust, the dust particles in the northwest are different from those in the south, so the impact can be greater.
8
5
Share

What warning light indicates no engine oil in a car?

When a car is low on engine oil, it will display an oil can dripping symbol. The engine oil warning light indicates the oil level and pressure status inside the engine, typically appearing in red or yellow. This light illuminates during vehicle self-check when turning the key and should turn off automatically after starting the engine. If the light remains on, it may indicate that the oil level or pressure is below standard values. Here are specific steps to address low engine oil: 1. Prepare oil in advance: Before a road trip, keep a bottle of engine oil in the vehicle for emergencies. If the red oil can warning light appears on the dashboard, pull over safely to check immediately. 2. Borrow oil: For vehicles that consume oil heavily, you can add compatible oil yourself. If other vehicles are available, you may borrow oil from them. 3. Request assistance: If the oil tank is accidentally damaged causing leakage and no repair facilities are nearby, call for roadside assistance. In case of oil line damage due to impact, request immediate road assistance.
17
0
Share

What is the function of a wet dual-clutch transmission?

The function of a wet dual-clutch transmission is to facilitate operation and reduce the failure rate. Below is an introduction to the knowledge about dual-clutch transmissions: 1. Function: The main purpose is to ensure smooth vehicle starts, reduce the impact load on transmission gears during gear shifts, and prevent overload in the drivetrain. In conventional vehicles, gear shifts are achieved through the engagement and disengagement of the clutch, which results in a temporary interruption of power transmission during the process. 2. Concept of wet dual-clutch: A wet dual-clutch refers to a multi-plate clutch system where two clutches, one large and one small, are coaxially installed together. Both are housed in a sealed oil chamber filled with hydraulic fluid. As a result, the wet clutch structure offers better adjustability and superior thermal properties, allowing it to transmit higher torque.
6
5
Share

What Causes the Tire Pressure Monitoring Light to Illuminate?

Here are the specific reasons why the tire pressure monitoring light may illuminate: 1. Punctured tire: If a tire is slowly leaking air due to a puncture, you can drive at low speed to the nearest repair shop for assistance. Do not immediately remove the nail, as this may cause more severe air leakage, rendering the vehicle unable to continue driving. 2. Prolonged driving or lack of tire pressure maintenance: Extended driving increases tire temperature, leading to higher tire pressure and triggering the tire pressure warning light. In this situation, you can park the vehicle and wait for the tires to cool down naturally before continuing, or switch to a spare tire. If the issue is caused by prolonged lack of tire pressure maintenance, using an onboard air pump to inflate the tires to the normal range will allow for normal driving.
3
4
Share

What Happens When Engine Oil is Insufficient?

When engine oil is insufficient, the lubrication effect on the engine is inadequate, increasing friction resistance and accelerating wear on the engine and its components. Prolonged oil deficiency can lead to severe engine overheating, causing malignant mechanical failures in moving parts, reducing the engine's service life, and even resulting in engine failure. Here are the relevant details: 1. The role of engine oil: Engine oil, often referred to as the 'blood' of a car, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. 2. Adding engine oil: If the oil level is low, it can generally be topped up independently. However, it is crucial to ensure that the added oil is of the same brand and type to avoid mixing different oils. Additionally, opened oil containers can be used for topping up if they are less than a year old, but oil older than a year is generally considered ineffective and not recommended for use.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.